Abstract:Li metal batteries are regarded as a promising system to overcome the energy density limitations of the current graphite anode Li-ion batteries, by taking advantage of the low reduction potential of lithium metal (-3.04 V vs SHE) and extremely high theoretical capacity (3860 mAh g -1 ). However, its use is still plagued with challenges that must be solved in order to achieve a successful Li-metal battery operation, that primarily relies on the performance, stability, and reversibility of the anodic side. Those challenges are related to safety concerns, mainly caused by the uncontrolled growth of high surface area lithium (HSAL) and high volumetric expansion. In this sense, to enable the safe use of Li metal, the concept of protective coating has been proposed, enabling to tailor of adequate interphases that can thermodynamically stabilize the lithium metal surface, and therefore improve the lifespan and safety of the battery. The ideal coating should possess a balance between mechanical strength, flexibility, and ionic conductivity, at the time it enables a uniform and efficient transport of lithium ions. Additionally, it must be electronically insulating and possess high chemical and electrochemically stability. In this context, polymeric coatings can offer good flexibility and elasticity which makes them suitable to adapt to the volumetric changes during lithium stripping/deposition cycles. Moreover, they can form uniform films, creating an ideal contact with lithium metal surface. An attractive group of materials that can provide numerous advantages such as high chemical, mechanical and thermal stability, are polysaccharides, aside from being the highly abundant and renewable resource on the Earth, which can be obtained in different forms. Several studies have shown that concentration polarization during battery operation is the main responsible for HSAL generation and limited cycle life, due to the coupled anion-cation movement in the electrolyte. To solve this problem the use of single-ion conducting polymers (SICPs) can result beneficial due to their immobilized anions to a polymeric backbone, which eases lithium ion transport, boosting lithium transference number (t Li+ ). In addition, the selection of an appropriate polymeric backbone that can withstand volumetric changes, and allow a satisfactory ionic conductivity is essential. In this regard, the use of cellulose is preferred due to their film formation and mechanical properties, lightweight, high abundance, and biodegradability. Herein, a polymeric coating based on cellulose and P(LiMTFSI) single-ion conductor polymer is studied as a protective coating for metallic Li, in order to prevent HSAL initiation and propagation, as well as to enhance electrochemical stability in liquid and solid polymer electrolyte. The coating effectiveness is tested by casting the solution on activated lithium surface and performing lithium stripping/deposition in Li/Cu pouch cells. Additionally, the correlation with its electrochemical and physicochemical properties is performance based on microscopy and spectroscopy technics, to study the most relevant parameters influencing Coulombic Efficiency.

Inhibition of hydrogen evolution and corrosion protection of negative electrode of lead-acid battery by natural polysaccharide composite: Experimental and surface analysis

Polyaniline–Lead Composites as Inhibitors for the Hydrogen Evolution Reaction, Relevant for Lead-Acid Batteries

Biodegradable polysaccharide grafted polyacrylamide inhibitor for corrosion in CO2- saturated saline solution

Stable and antibacterial tannic acid-based covalent polymeric hydrogel for highly selective Pb2+ recovery from lead-acid battery industrial wastewater

Ion transport properties and performance of gellan gum based composite polymer membrane electrolytes in proton battery and PEMFC applications

Synthesis and characterization of lead sulfate/graphene nano sheets composites as anode materials for lead acid battery

Controlling the corrosion and hydrogen gas liberation inside lead-acid battery via PANI/Cu-Pp/CNTs nanocomposite coating

An Effective Strategy for Interface Modification and Polysulfide Confinement by Gel Polymer Electrolyte Coating on the Sulfur Cathode

A Modified Natural Polysaccharide As a High-Performance Binder for Silicon Anodes in Lithium-Ion Batteries.

High Performance Anti-Corrosion Coatings of Poly (vinyl Butyral) Composites with Poly N-(vinyl)pyrrole and Carbon Black Nanoparticles.

(Invited) Functional Protective Coatings Based on Polysaccharides and Single-Ion Conducting Polymers for Li Metal Batteries

Insights on Prussian Blue Analogue Cathode Material Engineered with Polypyrrole Surface Protection Layer for Aqueous Rechargeable Zinc Metal Battery

Suitability of Ethyl Cellulose As a Binder in Positive Electrode of Aqueous Battery

In-situ Electrodeposition of Conductive Polypyrrole-Graphene Oxide Composite Coating for Corrosion Protection of 304SS Bipolar Plates

Investigation and Application of Polysiloxane-Based Gel Electrolyte in Valve-Regulated Lead-Acid Battery

Synthesis, characterization and column adsorption properties of gum ghatti and water hyacianth derived cellulose grafted poly(vinyl sulfonic acid- co -acrylamide) composites

Guar Gum As a Novel Binder for Sulfur Composite Cathodes in Rechargeable Lithium Batteries

In-situ synthesis of novel nanostructured Pb@C composites for improving the performance of lead-acid batteries under high-rate partial-state-of-charge operation

Understanding the Synergistic Effect of Alkyl Polyglucoside and Potassium Stannate As Advanced Hybrid Corrosion Inhibitor for Alkaline Aluminum-Air Battery

Polyglutamic Acid Binder for High-Performance Lithium–Sulfur Batteries

A Layered-Carbon/pbso4 Composite As a New Additive for Negative Active Material of Lead-Acid Batteries