Bronchial Adenoma And The Carcinoid Syndrome

G. V. Bhikdley,J. Bonnet

DOI: https://doi.org/10.1097/00000658-196705000-00003

IF: 13.787

1967-05-01

Annals of Surgery

Abstract:

What problem does this paper attempt to address?

Two-step Recovery of Pb(II) and Cd(II) with Thiophene Functionalized Hydrogel from Lead-Acid Battery Wastewater: Insight into Ph-Regulated Separation

Yanni Jiang,Lingxiao Lu,Zifan Liu,Weiguo Zhang,Fuqiang Liu,Aimin Li

DOI: https://doi.org/10.1016/j.seppur.2024.128541

IF: 8.6

2025-01-01

Separation and Purification Technology

Abstract:Lead-acid batteries (LAB) are one of the most harmful batteries to the environment and human health. LAB wastewater contains Pb(II) and Cd(II), meanwhile, strongly acidic media (pH <= 3.0) poses a serious threat to ecological safety and human health. Herein, a novel thiophene functionalized biomass-based hydrogel (PEITCSA) containing various groups was prepared by a two-step synthesis strategy involving liquid-phase modification and dopant-induced crosslinking. The static experiments relating to selectivity, kinetics and equilibria confirmed that PEITC-SA not only had a high adsorption capacity and selectivity for Pb(II) at pH 2.0, but also had a good adaptability for both Pb(II) and Cd(II) at pH 3.0. Moreover, the coexistence of inorganic salts and organic compounds had little effect on the adsorption of Pb(II) and Cd(II). Complexation was confirmed as the main adsorption force at pH 2.0, meanwhile at pH 3.0, electrostatic interaction, ion exchange interaction and complexation were all involved. According to Density Functional Theory calculations, tetradentate coordination of thiophene and amino groups was the most stable. Dynamic column experiments towards simulated LAB wastewater demonstrated the high efficiency and feasibility of pH-regulated fractional treatment, which of unexpected economic prospects. Furthermore, PEITC-SA could be easily desorbed with dilute HCl solution. Therefore, PEITC-SA possessed satisfactory potential for the resource recovery towards LAB wastewater through pH-regulated two-step separation.
Multipurpose Polysaccharide-based composite hydrogel with magnetic and thermoresponsive properties for phosphorus and enhanced copper (II) removal

Mingyun Dai,Yadong Zhang,Leping Zhang,Ye Tian,Gang Liu,Jian Zhao,Ying Liu,Songming Zhu,Zhangying Ye

DOI: https://doi.org/10.1016/j.compositesa.2022.106916

2022-01-01

Abstract:Adsorption is an effective approach for elimination of phosphorus from wastewater. Nevertheless, the environmental impact of adsorbent materials, the difficulty of recycling, and unsatisfactory utilization efficiency for disused adsorbents are still the limitations of adsorbent development and utilization. Herein, a novel polysaccharide-based composite hydrogel (HBPEC/SA/lignin hydrogel) containing 2-hydroxy-3-butoxypropyl hydroxyethyl cellulose (HBPEC), sodium alginate (SA) and lignin, designed for phosphorus and enhanced Cu2+ removal. The adsorption was pH dependent and was not affected significantly by co-existing anions (Cl- NO3 - and SO42-) except HCO3 (-). Interestingly, the captured phosphorus facilitated the adsorption of Cu2+, the Cu2+ adsorption capability increased from 10.49 to 14.51 mg Cu/g by P-loaded adsorbent compared with adsorbent without P loaded. Particularly, the adsorbent achieved quick desorption due to its thermoresponsive. The shrunken hydrogel could be desorbed with only small amount of eluent and showed relatively high desorption efficiency. Altogether, HBPEC/SA/lignin hydrogel exhibited appealing application prospects in wastewater treatment.
In situ polymerization of magnetic graphene oxide-diaminopyridine composite for the effective adsorption of Pb(II) and application in battery industry wastewater treatment

Zongwu Wang,Qing Wu,Jing Zhang,Huan Zhang,Jinglan Feng,Shuying Dong,Jianhui Sun

DOI: https://doi.org/10.1007/s11356-019-06511-1

IF: 5.8

2019-09-14

Environmental Science and Pollution Research

Abstract:The efficient removal of heavy metals from aqueous environment is imperative and challenging. A novel ternary composite constructed of diaminopyridine polymers, graphene oxide, and ferrite magnetic nanoparticles was designed by a facile in situ polymerization strategy for the removal of Pb(II) from aqueous solution. Detailed characterization of morphological, chemical, and magnetic properties was employed systematically to confirm the formation of the composite material. Batch adsorption experiment studies suggested that the composite was an excellent adsorbent for Pb(II) which was easily collected after use via exposure to an external magnetic field for 30 s. The effects of different parameters such as solution pH, adsorbent dosage, contact time, initial Pb(II) concentration, temperature, and co-existing ions were examined. The maximum adsorption capacity at pH = 5 was estimated to be 387.2 mg g−1 at 298 K by the Langmuir isotherm model, accompanied by favorable adsorption recyclability according to the investigation of regeneration experiments. Thermodynamic studies revealed that the Pb(II) adsorption via our ternary composite was endothermic and spontaneous. The corresponding removal performance for effluent containing Pb(II) from the battery industry was successfully examined. The present results indicated that our designed adsorbent is beneficial to the practical Pb(II) removal in wastewater purification.

environmental sciences
Highly effective and selective removal of lead ions by polymer-grafted silica-coated acid-resistant magnetic chitosan composites

Yaoyao Huang,Yu Shen,Guizhi Zhang,Peng Lu,Zhengsijia Wu,Rui Tang,Jiamin Liu,Xianying Wu,Chuang Wang,Huaili Zheng

DOI: https://doi.org/10.1016/j.seppur.2023.123561

IF: 8.6

2023-06-01

Separation and Purification Technology

Abstract:Separation and recovery of lead resources from lead-containing wastewater is very important to achieve reuse of lead(II) and environmental protection. Herein, a novel magnetic separation adsorbent, polymer-grafted silica-coated acid-resistant magnetic chitosan composite (PMSC), was facilely constructed and applied for the efficient and selective adsorption of Pb(II) from aqueous solutions. The adsorption results in the Pb(II) mono-contaminated system showed that the adsorption process of PMSC on Pb(II) was significantly pH-responsive and increased with increasing pH, reaching a qmax value of 88.03 mg g−1 at pH 6.0, which was more than 6 times of MSC (14.47 mg g−1). More interestingly, the adsorbent with inert silica coated on the core has a higher acid resistance, with almost no iron leaching from PMSC at pH 1.0, while PMC has 3.99 mg L−1 of iron leaching. The results of adsorption isotherms and kinetics of Pb(II) by PMSC showed that Langmuir and pseudo-second-order kinetics can better describe the adsorption behavior, indicating that the adsorption process was mainly controlled by chemisorption and the maximum monolayer adsorption capacity can reach 111.12 mg g−1 at 298.15 K. Furthermore, PMSC maintained about 80 % of the initial adsorption capacity after five cycles of repeated use, demonstrating its good regenerative cycling performance. Also, PMSC showed excellent selective adsorption of Pb(II) in the coexistence solutions of multiple metal ions with the SPb up to 85.83 %, which was far more than that of MSC (23.55 %), indicating that the polymer grafting had a significant enhancement on the selective performance of the adsorbent. This work could provide design and preparation insights for the development of novel, acid-resistant, recyclable and fast magnetic separation adsorbents for the efficient selective separation of lead ions.

engineering, chemical
A Graphene-Based Porous Composite Hydrogel for Efficient Heavy Metal Ions Removal from Wastewater

Li Zhang,Ting Su,Zairan Luo,Bin Xu,Wei Yao,Mengxiang Zhou,Wenzhong Yang,Hui Xu

DOI: https://doi.org/10.1016/j.seppur.2022.122484

IF: 8.6

2023-01-01

Separation and Purification Technology

Abstract:A graphene-enhanced supramolecular hydrogel containing poly(acrylic acid) (PAA) and poly(4-vinylpyridine) (P4VP) was fabricated for the wastewater remediation. In this work, P4VP brushes were grown from function-alized graphene oxide (GO) through surface-initiated atom transfer radical polymerization. Then, the P4VP-grafted GO (i.e., GO-g-P4VP) was integrated into PAA matrix to form GO-g-P4VP@PAA hydrogel as a highly efficient adsorbent for extraction of toxic metal ions from wastewater. Due to the introduction of GO-g-P4VP, the GO-g-P4VP@PAA composite hydrogel exhibited good compressive strength, and a special interconnected 3D porous network was formed in the hydrogel. The effect of pH, initial heavy metal ion concentration, contact time, and adsorbent dosage regarding the adsorption capacity and removal efficiency of Pb2+ and Cd2+ on the hydrogel was examined. Under appropriate conditions, the GO-g-P4VP@PAA hydrogel can achieve maximum adsorption capacities of 257.28 mg/g for Pb2+, 175.79 mg/g for Cd2+. The adsorption kinetics of Pb2+ and Cd2+ on the GO-g-P4VP@PAA hydrogel followed a pseudo-second order model and the adsorption isotherms were more consistent with the Langmuir isotherm model. In addition, the GO-g-P4VP@PAA hydrogel exhibited good reusability. After five cycles, the removal efficiency of both Pb2+ and Cd2+ still remained above 80 %. These results demonstrate the GO-g-P4VP@PAA hydrogel serves as a desirable adsorbent in removal of heavy metal cations from wastewater.
Fabrication of novel inorganic mineral-polymer composite polydopamine-modified diatomaceous earth @ polydopamine-polyethyleneimine/calcium alginate and its highly effective applications in lead ions adsorption

Xiaoqiong Wu,Yutong Song,Qiang Xu,Ping Yin,Zhenglong Yang,Yanbin Xu,Feng Wang,Ying Wang,Wenjuan Sun,Honglan Cai

DOI: https://doi.org/10.1007/s00339-022-06207-3

2022-11-16

Applied Physics A: Materials Science and Processing

Abstract:In the present work, a novel inorganic mineral-polymer composite polydopamine-modified diatomaceous earth @ polydopamine-polyethyleneimine/calcium alginate PDA-DE@PEI/CA was successfully prepared to remove heavy metal ions, especially lead ions, from aqueous solution. The adsorbent composite was characterized by SEM, EDS, FT-IR, TG, porous structure analysis, and XPS and was efficiently utilized to remove lead ions from the simulated lead-containing industrial wastewater through adsorption method. The dependence of adsorption for lead ions on solution acidity, adsorbent dosage, adsorption time, and equilibrium concentration was investigated in a batch mode. It was shown that the adsorption kinetics model was based on the pseudo-second-order rate equation. Both Langmuir isotherm model and Freundlich isotherm model were used to analyze equilibrium adsorption data, and the experimental data fitted well with the Freundlich isotherm model, and the lead ions exhibited a more preferred multilayer adsorption. The maximum adsorption capacity of PDA-DE@PEI/CA for lead ions could reach 1086.96 mg/g at 25 °C that is very high compared with other reported adsorbent materials for lead ions. Therefore, PDA-DE@PEI/CA with unique microstructure and diverse functional groups exhibited excellent adsorption properties for lead ions, and it could be used as an efficient adsorbent material and further a reduction catalyst in wastewater treatment.

materials science, multidisciplinary,physics, applied
Evaluation of the excellent adsorption performance for lead ions of (sodium alginate/ waste para-aramid)-based polymer composite functionalized by ethylene diamine tetra (methylene phosphonic acid)

Wansong Zhang,Feifei Li,Ping Yin,Zhenglong Yang,Yanbin Xu,Feng Wang,Ying Wang,Wenjuan Sun,Honglan Cai

DOI: https://doi.org/10.1007/s10965-024-04158-2

IF: 3.061

2024-10-22

Journal of Polymer Research

Abstract:With the rapid development of industry, efficient removal of heavy metal ions such as lead ions in wastewater has been attracted much attention in the fields of water treatment and environmental remediation. Herein, a novel polymer composite adsorbent material EDTMPA-P/A has been successfully prepared through the combination of sodium alginate and waste para aramid using low-temperature esterification method, and the subsequent modification of EDTMPA (ethylene diamine tetra (methylene phosphonic acid)). The static saturation adsorption experiment verified that EDTMPA-P/A had significant adsorption performance for lead ions, hence, EDTMPA-P/A has been employed to adsorb lead ions from aqueous solutions, and the relevant adsorption behaviors of the polymer composite adsorbent for lead ions have been investigated in detail. The adsorption isotherm of EDTMPA-P/A was consistent with the Langmuir isotherm model, and the corresponding kinetics data were well fitted by the pseudo-second-order kinetic model. The maximum adsorption capacity of EDTMPA-P/A obtained by Langmuir isotherm for lead ions was 315.46 mg/g at 35 °C, which was much higher than other adsorbents reported in the literatures. Moreover, the adsorption thermodynamic parameters Δ G , Δ H and Δ S of EDTMPA-P/A for lead ions were 1.92 kJ mol −1 (35 °C), 14.69 kJ mol −1 , and 41.74 J K −1 mol −1 , respectively. The research results indicated that EDTMPA-P/A could be evaluated as a novel efficient adsorbent with high efficiency in wastewater treatment and removal of lead ions, and it is great application prospect that EDTMPA-P/A with facile esterification synthesis at low temperature, modification process and excellent adsorption performance, therefore, could be used as a high efficient adsorbent for lead ions removal, which also has simultaneously achieved the reuse object of waste para aramid.

polymer science
Efficient and selective removal of Pb(ii) from aqueous solution by a thioether-functionalized lignin-based magnetic adsorbent

Xuan Zhou,Yunlong Liu,Can Jin,Guomin Wu,Guifeng Liu,Zhenwu Kong

DOI: https://doi.org/10.1039/d1ra06774e

2022-01-05

Abstract:The effective and selective removal of heavy metal ions from sewage is a major challenge and is of great significance to the treatment and recovery of metal waste. Herein, a novel magnetic lignin-based adsorbent L@MNP was synthesized by a thiol-ene click reaction under ultraviolet (UV) light irradiation. Multiple characterization techniques, including Fourier transform infrared (FT-IR) spectrometry, X-ray diffraction (XRD), elemental analysis, vibrating sample magnetometry (VSM), scanning electron microscopy (SEM) and transmission electron microscopy (TEM), confirmed the formed nano-morphology and structure of L@MNP. The effects of pH, contact time, initial metal concentration and temperature on the batch adsorption of Pb(ii) by L@MNP were investigated. Due to the existence of sulfur and oxygen-containing sites, the maximum adsorption capacity of L@MNP for Pb(ii) could reach 97.38 mg g-1, while the adsorption equilibrium was achieved within 30 min. The adsorption kinetics and isotherms were well described by the pseudo-second-order model and Langmuir model, respectively, suggesting a chemical and monolayer adsorption process. In addition, L@MNP showed a high adsorption selectivity (k Pb = 0.903) toward Pb(ii) in the presence of other co-existing metal ions. The experimental results also revealed that L@MNP displayed structural stability, ease of recovery under an external magnetic field, and acceptable recyclability after the fifth cycle. Considering its facile preparation, low cost and high adsorption efficiency, the developed L@MNP adsorbent demonstrated great potential in removing heavy metal ions from wastewater.
Remarkable Ability of Pb(Ii) Capture from Water by Self-Assembled Metal-Phenolic Networks Prepared with Tannic Acid and Ferric Ions

Hui Qiu,Wenxiang Ni,Luyang Yang,Qingrui Zhang

DOI: https://doi.org/10.1016/j.cej.2022.138161

IF: 15.1

2022-01-01

Chemical Engineering Journal

Abstract:Plant-derived chelators used for heavy metal removal have attracted increasing attention because of their low cost, strong coordination effect, and environmentally benign features. Herein, natural polyphenol-based adsor-bents (i.e., TA-Fe7 and TA-Fe-12) were prepared using tannic acid (TA) and ferric ions through simple cross-linking self-assembly reactions with pH 7 and 12, respectively. Adsorption isotherms demonstrated that TA-Fe-12 showed better adsorption ability towards Pb(II) than TA-Fe7 with a maximum adsorption capacity of 356.1 mg.g(-1) at 298 K. Our evaluation of the adsorption affinity indicated that the distribution coefficient Kd of TA-Fe-12 for Pb(II) was apparently higher than that of the other cations, revealing the excellent adsorptive selectivity of TA-Fe-12 towards Pb(II). The remarkable adsorption capacity of TA-Fe-12 can be attributed to the strong coordination between Pb(II) and phenolic hydroxyl groups, ester groups of TA as well as the specific adsorption of Pb(II) on the newly formed hydrous ferric oxides (HFO), demonstrated by X-ray photoelectron spectroscopy (XPS) and Fourier transform infrared spectroscopy (FTIR) analysis. Batch cyclic experiments indicated that TA-Fe-12 could be employed for repeated use after 10 adsorption-desorption cycles. Fixed-bed tests indicated that the TA-Fe-12 column could produce clean water with bed volumes of 9500 and 7860 ([Pb] < 1 mg.L-1) from synthetic Pb(II)-polluted wastewater and simulated electroplating wastewater, which were significantly higher than those of other commercial adsorbents.
Mineralization and electroreduction-recycling of toxic Pb2+ ions using memory-effect of layered double hydroxide structure with ultrahigh capacity

Changjuan Li,Zixian Li,Jikang Wang,Wenbo Xiong,Hong Yan,Yiling Bai,Dermot O'Hare,Yufei Zhao

DOI: https://doi.org/10.1016/j.cej.2023.141926

IF: 15.1

2023-04-15

Chemical Engineering Journal

Abstract:Lead (Pb) as one of the most widespread toxic heavy metals in both water distribution systems and in surface water, it still remains a challenge to quickly and completely remove/recycle Pb ions from these systems. Herein, the obtained Mg2Fe-mixed metal oxides (Mg2Fe-MMO) through calcination of Mg2Fe-Cl-layered double hydroxide (Mg2Fe-Cl-LDH) showed extremely high mineralized capacity for Pb ions with removal figures of 2406 mg/g. This performance is superior to most reported materials, and can rapidly purify Pb2+ at 1 ppm to safe levels (12 ppb). X-ray absorption fine structure (XAFS) studies revealed a transformation from MgFe-MMO to defective Mg2Fe-CO3-LDH with the Pb ions sequestering OH− from Mg2Fe-CO3-LDH to form a solid precipitate. Moreover, the mineralized products could be recycled by electrolysis to obtain metallic lead, providing a new opportunity for pollution remediation and the recovery of metal lead. This work provides a new route for Pb ions removal from wastewater and the potential for utilization of the recycled Pb resource.

engineering, chemical, environmental
An MXene-Grafted Terpolymer Hydrogel for Adsorptive Immobilization of Toxic Pb(II) and Post-Adsorption Application of Metal Ion Hydrogel

Himarati Mondal,Mrinmoy Karmakar,Bhaskar Datta

DOI: https://doi.org/10.3390/gels9100827

IF: 4.6

2023-10-19

Gels

Abstract:Toxic metal ions present in industrial waste, such as Pb(II), introduce deleterious effects on the environment. Though the adsorptive removal of Pb(II) is widely reported, there is a dearth of research on the suitable utilization and disposal of the Pb(II)-adsorbed adsorbent. In this work, an MXene-grafted terpolymer (MXTP) hydrogel has been designed for the adsorption of Pb(II) under ambient conditions of pH and temperature. The hydrogel MXTP was synthesized by facile one-pot polymerization in aqueous solvent, and the detailed structural characterization of terpolymer (TP), MXTP, and Pb(II)-loaded MXTP, i.e., Pb(II)-MXTP, was carried out by a combination of proton nuclear magnetic resonance (1H NMR), Fourier-transform infrared (FTIR), X-ray photoelectron spectroscopy (XPS), X-ray diffractometric (XRD), thermogravimetric/differential thermogravimetric (TG/ DTG), and field emission scanning electron microscopic (FESEM) analyses. The specific capacitance and conductivities of Pb(II)-MXTP were studied with cyclic voltammetry (CV) and electrical impedance spectroscopy (EIS), which unambiguously indicate successful post-adsorption application. The specific capacitance of MXTP decreased after Pb(II) adsorption, whereas the conductivity increased significantly after Pb(II) adsorption, showing that MXTP can be successfully deployed as a solid electrolyte/anode after Pb(II) adsorption. This study covers the synthesis of a novel MXene-grafted terpolymer hydrogel for adsorptive exclusion of Pb(II) and assessment of the as-adsorbed Pb(II)-loaded hydrogel as a solid electrolyte/anode material and is the first demonstration of such post-adsorptive application.

polymer science
Highly Selective Separation of Pb(II) with a Novel Aminophosphonic Acid Chelating Resin from Strong-Acidic Hexa-Solute Media

Yingzhi Lv,Tanshang Li,Yanni Jiang,Liting Wang,Zicheng Liu,Fuqiang Liu,Aimin Li

DOI: https://doi.org/10.1016/j.seppur.2022.121818

IF: 8.6

2022-01-01

Separation and Purification Technology

Abstract:The aminophosphonic acid chelating resin of PMAA-P bearing tertiary diphosphonic amine and amide groups, was newly prepared based on poly(methyl acrylate) and ethylenediamine. Due to the extra amide group and 4.64 mmol/g of high grafting molar mass of phosphonic acid groups, PMAA-P was found to combine with Pb(II) through ionic and coordinate bonds to form more stable tridentate and tetradentate coordination modes, resulting in much higher adsorption capacity and selectivity for Pb(II) than the commercial resin S950 even from strongly acidic media (pH 2.0). The maximum adsorption capacity of PMAA-P for Pb(II) was 1.548 mmol/g, exceeding that of S950 by 78.14%. Additionally, as to the hexa-solute system, PMAA-P showed the selectivity order of Pb(II) >> Cu(II) > Cd(II) > Zn(II) > Co(II) > Ni(II), with such high separation factors of alpha(Pb(II))(HMCs) as 5.45-+infinity and the high Pb(II) adsorption amount of 1.010 mmol/g, which was 77.19% higher than S950. Moreover, because of the strong replacement effect, the maximum effluent concentration of Ni(II) exceeded 123.60% of its influent concentration in dynamic separation tests. Furthermore, the adsorption amount of Pb(II) remained above 1.241 mmol/g after being regenerated for five cycles. Above all, PMAA-P has great potential in highly selective separation of Pb(II) from strong-acidic media and thus explores an efficient way of treating lead-acid battery wastewaters.
Fabrication of Lignin-based Magnetic Adsorbent via Thiol-ene Click Reaction for the Effective Removal of Pb(II)

Xuan Zhou,Yunlong Liu,can Jin,Guomin Wu,Guifeng Liu,Zhenwu Kong

DOI: https://doi.org/10.21203/rs.3.rs-884794/v1

2021-09-17

Abstract:Abstract The effective and selective removal of heavy metal ions from sewage is a major challenge, and of great significance to the treatment and recovery of metal waste. Herein, a novel magnetic lignin-based adsorbent L@MNP was synthesized by thiol-ene click reaction under UV light irradiation. Multiple characterization techniques containing FT-IR, XRD, elemental analysis, VSM, SEM and TEM confirmed the formed nano-morphology and structure of L@MNP. Effects of pH, contact time, initial metal concentration and temperature on the batch adsorption of Pb(II) by L@MNP were investigated. Due to the existence of sulfur and oxygen containing sites, the maximum adsorption capacity of L@MNP for Pb(II) could reach 97.38 mg/g, while the adsorption equilibrium was achieved within 30 min. Adsorption kinetics and isotherms were well described by the pseudo-second-order model and Langmuir model, respectively, suggesting a chemical and monolayer adsorption process. In addition, L@MNP showed a high adsorption selectivity ( k Pb = 0.903) toward Pb(II) in the presence of other co-existing metal ions. Experimental results also revealed that L@MNP displayed structural stability, easy recovery under external magnetic field, and acceptable recyclability after the fifth cycle. Considering its facile preparation, low cost and high adsorption efficiency, the developed L@MNP adsorbent demonstrated great potential in removing heavy metal ions from wastewater.
Utilizing triethylenetetramine-functionalized MIP-206 for highly efficient removal of Pb(II) from wastewater

Bizhan Shilani,Reza Mehdipour,Behnam Mousazadeh,Yasin Noruzi,Seyednooroldin Hosseini,Hasan N Al-Saedi,Sura Mohammad Mohealdeen

DOI: https://doi.org/10.1038/s41598-024-66358-6

2024-07-06

Abstract:The global concern over heavy metal pollution necessitates urgent measures to safeguard human health and the environment. This study focuses on employing triethylenetetramine (TETA)-functionalized MIP-206-OH (TMIP-206) as an effective adsorbent for removing Pb(II) from wastewater. TMIP-206 was synthesized via a hydrothermal method followed by functionalization with TETA. Kinetic studies demonstrate that lead removal on TMIP-206 conforms to the pseudo-second-order model, indicating an efficient removal process. Experimental results reveal that TMIP-206 aligns with the Langmuir isotherm, exhibiting a maximum removal capacity of 267.15 mg/g for lead ions. The sorption efficiency of TMIP-206 for Pb ions remains stable across six cycles, with a reduction of less than 15%. Optimal adsorption performance is observed at a pH of 6. These findings underscore the potential of TMIP-206 as an alternative for adsorbing Pb(II) from aqueous environments, addressing the global challenge of heavy metal pollution. Future research should explore the scalability and long-term stability of TMIP-206-based adsorbents to enhance their practical applicability in diverse environmental contexts and contribute to broader strategies for mitigating heavy metal contamination.
Synthesis of graphene oxide grafted by diazanyl groups and its application in recovery of lead from lead-acid wastewater

Chao-Zhi Zhang,Rui-Hua Jin,Qian-Qian Shen,Ling-Ling Liu

DOI: https://doi.org/10.1007/s11356-022-24319-4

IF: 5.8

2022-11-23

Environmental Science and Pollution Research

Abstract:Heavy metal ion (HMI) in wastewater is a kind of resource that is wrongly placed. Recovery of heavy metal from lead-acid wastewater desires efficient and reusable functional materials. In this paper, graphene oxide-like with diazanyl groups (GOLA) was synthesized by a nucleophilic substitution reaction of graphene oxide-like with hydroxyl groups (GOLH) with diazane. GOLA exhibited good stability and recyclability in wastewater. The maximal adsorption capacity (qmax) values of GOLA for Pb(II), Cd(II), Cu(II), Ni(II), and Cr(III) ions were 505.80, 401.99, 83.48, 82.29, and 147.77 mg/g, respectively. The equilibrium time of GOLA adsorbing HMIs was 20 min. GOLA was employed to recover lead ions from lead-acid wastewater to give Pb(OH)2 and reusable water. Therefore, this paper provides a useful method of recycling lead from lead-acid wastewater.Graphical Abstract

environmental sciences
Ameliorating amyotrophic lateral sclerosis.

L. Rowland

DOI: https://doi.org/10.1056/NEJMcibr0912229

IF: 158.5

2010-03-17

New England Journal of Medicine

Abstract:A newly implicated molecular pathway in skeletal muscle regulates the formation of the neuromuscular junction and is implicated in a mouse model of amyotrophic lateral sclerosis.
Fabrication of sodium alginate-melamine@ZIF-67 composite hydrogel and its adsorption application for Pb(II) in wastewater

Xiao Zhang,Zhiyue Li,Taoyi Zhang,Jing Chen,Wenxi Ji,Yun Wei

DOI: https://doi.org/10.1007/s11356-022-23072-y

IF: 5.8

2022-10-11

Environmental Science and Pollution Research

Abstract:A low-cost and environmental-friendly sodium alginate-melamine@zeolitic imidazolate framework-67 (SA-ME@ZIF-67) adsorbent was fabricated by chemical grafting and in situ growth for the removal of lead ions in wastewater. Firstly, melamine (ME) was grafted onto sodium alginate (SA) by amide reaction, and then SA-ME was dropped into a solution of calcium chloride to form hydrogel bead, and ZIF-67 was grown on the SA-ME hydrogel bead by the in situ growth method. The SA-ME@ZIF-67 adsorbent was characterized by Fourier transform infrared spectroscopy, scanning electron microscopy, X-ray photoelectron spectroscopy, and X-ray diffraction. The SA-ME@ZIF-67 adsorbent was used to effectively adsorb Pb(II) from aqueous solutions. The initial concentrations of lead ions, adsorbent dose, initial pH of lead ion solution, temperature, and adsorption time for the material were optimized. The adsorption isotherms and kinetics fitted to Langmuir isotherm model ( R 2 = 0.9281, 0.9420, and 0.9623 at the temperatures of 288.15 K, 298.15 K, and 308.15 K, respectively) and pseudo-second-order kinetic model ( R 2 = 0.9901) respectively. According to the Langmuir model at 308.15 K, the maximum adsorption capacity of the adsorbent for Pb(II) was 634.99 mg/g. The recycling application of the adsorbent was possible as it was easily collected and reused after five adsorption-regeneration cycles. In addition, the Pb(II) in real wastewater samples has been efficiently removed using the fabricated hydrogel. The results showed that the SA-ME@ZIF-67 adsorbent had high adsorption capacity, removal efficiency, and easy recyclability for Pb(II).

environmental sciences
A magnetic macroporous α-Fe2O3/Mn2O3 nanocomposite as an efficient adsorbent for simple and rapid removal of Pb(II) from wastewater and electronic waste leachate

Saad S. M. Hassan,Hadeel H. El-Shalakany,Mahmoud Abdelwahab Fathy,Ayman H. Kamel

DOI: https://doi.org/10.1007/s11356-024-35452-7

IF: 5.8

2024-11-28

Environmental Science and Pollution Research

Abstract:A magnetic nanocomposite adsorbent, comprised of macroporous iron oxide/manganese oxide (α-Fe 2 O 3 /Mn 2 O 3 ), is prepared, characterized, and used for lead(II) removal from both industrial wastewater and leachate of electronic waste. The synergistic interaction between iron oxide and manganese oxide significantly enhances the adsorption performance. The surface characteristics and structural composition of the nanocomposite are examined using high-resolution transmission microscopy, X-ray spectroscopy, and Brunauer–Emmett–Teller methods. Under optimized conditions, the present method offers a significantly high adsorption capacity (377.5 ± 8.9 mg.g −1 ), short contact time (10 min), and an excellent removal efficiency (98.0 ± 0.9%) compared with most of the previously suggested methods. The adsorption kinetics of Pb(II) on the nanocomposite surface follows pseudo-second-order kinetics and exhibits a good fit with the Dubinin-Radushkevich (D-R) model. These findings highlight the applicability of the α-Fe 2 O 3 /Mn 2 O 3 magnetic nanocomposite as a promising efficient adsorbent for the rapid removal of lead(II) from hazardous wastewater. Moreover, the proposed nanocomposite adsorbent exhibits remarkable stability and can be easily isolated from the test sample solution for subsequent reuse. The efficacy of the developed adsorptive removal procedure is confirmed by achieving a complete lead(II) ion removal from some industrial wastewater discharged from lead battery factories and from the leachate of electronic waste.

environmental sciences
Prominent Removal of Trace Lead (II) Ions from Polluted Water by Terephthalic Acid Reformed Al/Zn Metal Organic Nanoflakes

Junhua Li,Lingshu Gao,Junmao Hong,Xiaofeng Shi,Sifang Kong,Jingyu Wang,Hassan Algadi,Benbin Xu,Zhanhu Guo

DOI: https://doi.org/10.1016/j.partic.2023.02.020

IF: 3.5

2024-01-01

Particuology

Abstract:Terephthalic acid reformed Al/Zn metal organic nanoflake was prepared and functionalized with trie-thylamine (T-AlZn). Without adding terephthalic acid, there was no product of metal organic nanoflake. T-AlZn has a remarkable performance in removing trace lead (II) ions (Pb2+). The adsorption equipoise with the removal rate >= 97% was reached within 35 min. The removal rates of T-AlZn for Pb2+ declined by only 16.73% after four regenerations. The adsorption of T-AlZn for Pb2+ follows the Langmuir isotherms model and pseudo-second-order dynamics model. The utmost adsorption competence was calculated as 215.27 mg g-1. The T-AlZn adsorbent exhibits a bright prospect in the adsorption for Pb2+ and is a considerable candidate in the disposal of industrial sewage.(c) 2023 Published by Elsevier B.V. on behalf of Chinese Society of Particuology and Institute of Process Engineering, Chinese Academy of Sciences.
Artificial humic acid synthesized from food wastes: An efficient and recyclable adsorbent of Pb (II) and Cd (II) from aqueous solution

Peng Zhao,Zhanbin Huang,Qian Ma,Bolun Zhang,Ping Wang

DOI: https://doi.org/10.1016/j.eti.2022.102399

2022-08-01

Abstract:Developing green, sustainable, and low-cost adsorbents for removing heavy metals from wastewater while recycling food wastes can avoid secondary environmental damage. In this work, artificial humic acid (A-HA) was prepared through biological fermentation using food wastes as raw materials with the goal to remove Pb (II) and Cd (II) from aqueous solution. The results showed that Pb (II) adsorption by A-HA was superior to that of Cd (II). Electrostatic interaction, surface complexation, ion exchange, and π – π interaction played key roles in the adsorption and desorption of A-HA for Pb (II) and Cd (II). The Langmuir isothermal adsorption model was more suitable for the adsorption of Pb (II) and Cd (II) by A-HA, and at 45 °C, maximum adsorption capacities were 37.6 mg/g and 3.33 mg/g, respectively. The adsorption kinetics of Pb (II) and Cd (II) by A-HA showed good fit with the pseudo-first-order kinetic model. The adsorption capacities of A-HA for Pb (II) and Cd (II) first increased gradually and finally stabilized with increasing initial concentration of adsorbate. In the pH range of 1–7, the adsorption capacities of A-HA for Pb (II) and Cd (II) first increased and remained stable. However, the adsorption capacities were inhibited by increasing ionic strength. Under optimal adsorption conditions, very little Pb (II) and Cd (II) were desorbed. In , A-HA might be a promising and effective adsorbent for metal removal because of its environmental friendliness, low cost, and its origin from food wastes as raw materials.

environmental sciences,engineering, environmental,biotechnology & applied microbiology

Bronchial Adenoma And The Carcinoid Syndrome

Two-step Recovery of Pb(II) and Cd(II) with Thiophene Functionalized Hydrogel from Lead-Acid Battery Wastewater: Insight into Ph-Regulated Separation

Multipurpose Polysaccharide-based composite hydrogel with magnetic and thermoresponsive properties for phosphorus and enhanced copper (II) removal

In situ polymerization of magnetic graphene oxide-diaminopyridine composite for the effective adsorption of Pb(II) and application in battery industry wastewater treatment

Highly effective and selective removal of lead ions by polymer-grafted silica-coated acid-resistant magnetic chitosan composites

A Graphene-Based Porous Composite Hydrogel for Efficient Heavy Metal Ions Removal from Wastewater

Fabrication of novel inorganic mineral-polymer composite polydopamine-modified diatomaceous earth @ polydopamine-polyethyleneimine/calcium alginate and its highly effective applications in lead ions adsorption

Evaluation of the excellent adsorption performance for lead ions of (sodium alginate/ waste para-aramid)-based polymer composite functionalized by ethylene diamine tetra (methylene phosphonic acid)

Efficient and selective removal of Pb(ii) from aqueous solution by a thioether-functionalized lignin-based magnetic adsorbent

Remarkable Ability of Pb(Ii) Capture from Water by Self-Assembled Metal-Phenolic Networks Prepared with Tannic Acid and Ferric Ions

Mineralization and electroreduction-recycling of toxic Pb2+ ions using memory-effect of layered double hydroxide structure with ultrahigh capacity

An MXene-Grafted Terpolymer Hydrogel for Adsorptive Immobilization of Toxic Pb(II) and Post-Adsorption Application of Metal Ion Hydrogel

Highly Selective Separation of Pb(II) with a Novel Aminophosphonic Acid Chelating Resin from Strong-Acidic Hexa-Solute Media

Fabrication of Lignin-based Magnetic Adsorbent via Thiol-ene Click Reaction for the Effective Removal of Pb(II)

Utilizing triethylenetetramine-functionalized MIP-206 for highly efficient removal of Pb(II) from wastewater

Synthesis of graphene oxide grafted by diazanyl groups and its application in recovery of lead from lead-acid wastewater

Ameliorating amyotrophic lateral sclerosis.

Fabrication of sodium alginate-melamine@ZIF-67 composite hydrogel and its adsorption application for Pb(II) in wastewater

A magnetic macroporous α-Fe2O3/Mn2O3 nanocomposite as an efficient adsorbent for simple and rapid removal of Pb(II) from wastewater and electronic waste leachate

Prominent Removal of Trace Lead (II) Ions from Polluted Water by Terephthalic Acid Reformed Al/Zn Metal Organic Nanoflakes

Artificial humic acid synthesized from food wastes: An efficient and recyclable adsorbent of Pb (II) and Cd (II) from aqueous solution