Abstract:Organic rankine cycle (ORC) has been regarded as the most promising measure for converting low-grade waste heat into electricity during the past decades. To take better advantage of ORC, the parameters of ORC and its heat integration with the background process streams should be optimized simultaneously. In this work, the decision variables of ORC not only include the operating temperature, pressure, and flowrate but also contain the type of working fluids. A set of 43 pure fluids and 36 binary mixtures are adopted from the literature as candidates for working fluids. In addition, both the supercritical and subcritical conditions of ORCs are involved. Background process streams and ORC streams with variable temperatures and flowrates are synthesized for heat integration. Such a complicated heat integration problem cannot be solved by traditional methods, where the temperature and flowrates of streams are fixed. We develop a two-level optimization strategy. The outer level identifies the promising working fluids and their compositions, temperatures, and pressures inside the ORC. The inner level deals with the heat integration problem, where the temperatures and flowrates of streams are the variables. The flowrate of ORC, the utility consumption, as well as area of heat exchangers are optimized in the inner level based on the vertical heat transfer assumption of pinch technology. The outer level is solved by a genetic algorithm, while the inner level is solved by a deterministic algorithm. Case studies show that the inner level model for heat integration is superior in both efficiency and quality of the solution. We also provide an overview of the best ORC selection for a single waste heat source between 100 and 300 degrees C and show applicability for the integration of ORC and background processes with multiple streams in case studies.

Heat Engine Cycle Configurations for Maximum Work Output with Generalized Models of Reservoir Thermal Capacity and Heat Resistance

Optimal Configuration of Finite Source Heat Engine Cycle for Maximum Output Work with Complex Heat Transfer Law

Optimal Criteria for Different Parameters of an Irreversible Regenerative Intercooled Brayton Cycle under Maximum Power and Maximum Ecological COP Conditions

Simultaneous Optimization for Organic Rankine Cycle Design and Heat Integration

Optimization of Organic Rankine Cycle Involving Operating Conditions and Work Fluids and Heat Integration

Maximum work for Carnot-like heat engines with infinite heat source

Power and Heat-Work Conversion Efficiency Analyses for the Irreversible Carnot Engines by Entransy and Entropy

Optimal operating protocol to achieve efficiency at maximum power of heat engines

Optimization, Stability, and Entropy in Endoreversible Heat Engines

Maximizing work of finite-potential-reservoir isothermal-chemical-engines with generalized models of bypass-mass-leakage and mass-resistance

Power maximization for multistage endoreversible non-isothermal-chemical-engine based on Lewis analogy

Heat-work conversion optimization of one-stream heat exchanger networks

The Exergy Efficiency and Output Acoustic Power Performance Optimization of the Thermoacoustic Engine Micro-Cycle

Optimal Heat Exchanger Area Distribution and Low-Temperature Heat Sink Temperature for Power Optimization of an Endoreversible Space Carnot Cycle

Power and Thermal Efficiency Optimization of an Irreversible Steady-Flow Lenoir Cycle

Efficiency at maximum power of a quantum Carnot engine with temperature tunable baths

Beyond the Carnot Limit in the Internal Cycles of a Quantum Heat Engine under Finite Heat Reservoirs

Optimization of Heat Transfer and Heat-Work Conversion Based on Generalized Heat Transfer Law

THERMODYNAMIC OPTIMIZATION OF COUPLED HEAT WORK CONVERSION AND HEAT TRANSFER ENERGY SYSTEMS BY APPLYING INVERSE PROBLEM AND VARIATION METHOD

Optimal control theory for maximum power of Brownian heat engines

Optimal performance of a three stroke heat engine in the microscopic regime