Abstract:We propose a hierarchical multiscale modeling approach to simulate the hydro-mechanical coupling behavior in saturated high-porosity sandstone, with a particular focus on the occurrence and transition of compaction bands. In this multiscale approach, we use the finite element method (FEM) to solve the global boundary value problem for a sandstone, and the discrete element method (DEM) to solve the local representative volume elements (RVEs) embedded at the Gauss integration points of the FE mesh to provide the effective material constitutive responses required for FEM. The global governing equations for a coupled hydro-mechanical problem are solved with the standard u–p formulation, where the total stress is decomposed into the pore pressure and the effective stress which is directly derivable from the DEM solution of the RVEs, according to the seminal Terzaghi's effective stress principle. By choosing proper RVEs to represent the typical microstructure of high-porosity sandstone, we perform both drained and undrained simulations on saturated sandstone specimens to examine localized compactive failures developed therein. We identify that both mean effective stress and porosity control critically the initiation and development of failure modes in sandstone. Under undrained shear, our simulations show that a sandstone specimen may first develop a compaction band followed by a gradual transition to a shear-enhanced compaction band and even shear band, with the build-up of excessive pore pressure and hence drop of mean effective stress. In the specimen, regions experiencing localized volumetric contraction show relatively higher pore pressure than other regions and act as the source of flux flow. The Darcy flux peaks during the formation of compaction band and decreases gradually in the following stages. To distinguish the different failure stages with distinct physical attributes, the ratio of deviatoric strain to volumetric strain is adopted as a useful indicator signifying the underlying microstructural mechanisms for different deformation bands. This study signifies the importance of considering pore pressure and mean effective stress in fluid-involved engineering operations, e.g. aquifer management, hydrocarbon extraction and CO2 geological sequestration.

An Improved Capillary Pressure Model for Fractal Porous Media: Application to Low-Permeability Sandstone

Multiscale Modeling and Analysis of Compaction Bands in High-Porosity Sandstones

An Improved Rock Resistivity Model Based on Multi-Fractal Characterization Method for Sandstone Micro-Pore Structure Using Capillary Pressure

Synchrotron-based pore-network modeling of two-phase flow in Nubian Sandstone and implications for capillary trapping of carbon dioxide

Experimental and numerical modelling of the mechanical behaviour of low-permeability sandstone considering hydromechanics

A Semi-analytical Model for Pressure-Dependent Permeability of Tight Sandstone Reservoirs

Numerical Simulation of Hydraulic Fracture Propagation in Unconsolidated Sandstone Reservoirs

Evaluation of Capillary Pressure Methods via Digital Rock Simulations

Multi-method characterization of sandstone pore size distribution heterogeneity and its influence on porosity and permeability variation

A NEW RELATIVE PERMEABILITY MODEL OF UNSATURATED POROUS MEDIA BASED ON FRACTAL THEORY

Impacts of Pore-Throat System on Fractal Characterization of Tight Sandstones

Experimental and Numerical Studies of Water–Sand Flow in Fractured Porous Media

Computing Relative Permeability and Capillary Pressure of Heterogeneous Rocks Using Realistic Boundary Conditions

A New Model for Predicting Permeability of Chang 7 Tight Sandstone Based on Fractal Characteristics from High-Pressure Mercury Injection

Fractal model for permeability estimation in low-permeable porous media with variable pore sizes and unevenly adsorbed water lay

Water Sorptivity of Unsaturated Fractured Sandstone: Fractal Modeling and Neutron Radiography Experiment

Quantitative analysis of pore structure and permeability characteristics of sandstone using SEM and CT images

Fractal analysis of CT images of tight sandstone with anisotropy and permeability prediction

A fractal analytical model for Kozeny-Carman constant and permeability of roughened porous media composed of particles and converging-diverging capillaries

New fractal-dimension-based relation model for estimating absolute permeability through capillary pressure curves

Effects of Confining Pressure on Permeability in a Single Fracture Based on the Deformation of Hydraulic Aperture at Low Fluid Velocities