Abstract:To maintain safety and reliability in power plants, creep-life prediction models have received much attention over the years. This article was designed to focus on the conditions when a material structure is exposed to extremely high temperatures and pressures with the help of finite element analysis. A direct comparison of the feasibility of different models' fitness and suitability in predicting creep damage was presented in this article by simulating the damage evolution of a uniaxial SS-304 specimen under a pre-defined load, using established constitutive creep models. Comparative assessments of minimum creep strain rate, creep deformation, and stress rupture were demonstrated using the Norton–Bailey (NB), Kachanov–Rabotnov (KR), Theta projection (TP), and sine-hyperbolic (SH) models while standardizing them with the Omega model. The FE results of a dog-bone specimen, while implementing the models, were compared with the actual creep experiment results to check for the models' reliability and validation. Subsequently, sensitivity studies of the established creep models were conducted using the statistical tools RSM and ANOVA, with an analysis of how the parameters for operation, design, and material dependency came into effect. Thus, quantitative and qualitative correlation analyses of the FE creep response for these five established models were conducted together, resulting in finalizing the selection of the most suitable model, the sine-hyperbolic model, for the SS-304 material under the defined boundary conditions. The 0.84 R2 value of the sine-hyperbolic model proved the model's selection for predicting the creep response of stainless steel 304. The method can be applied to select a suitable creep damage model as per the feasibility of the operating conditions.

Application of a modified hyperbolic sine creep rate equation to correlate uniaxial creep data vs. stress and temperature for creep resistant low chrome steel alloys

Application of a modified hyperbolic sine creep rate equation to correlate uniaxial creep rupture data of Sanicro 25 and HR6W

Creep Behaviours of Cr25Ni35Nb and Cr35Ni45Nb Alloys Predicted by Modified Theta Method

The development of creep damage constitutive equations for high Cr steel

Predicting Creep Strengths and Lifetimes of Creep Resistant Engineering Alloys

Creep ductility and modified Monkman-Grant equation for Gr.92 by incorporating total strain

Creep life assessment of modified 9Cr-1Mo steel based on Monkman–Grant relationship considering temperature and stress dependences of strain required for rupture

On the Prediction of Long Term Creep Strength of Creep Resistant Steels

On the applicability of boundary condition based tensile creep model in predicting long-term creep strengths and lifetimes of engineering alloys

Creep Property Evaluation of a 2.25cr–1mo Low Alloy Steel

A comparison of extrapolation techniques for long-term creep strain and creep life prediction based on equations designed to represent creep curve shape

Assessment of Creep Behavior Using a Damage-Coupled Model for Martensitic Stainless Steel

On the physical models for predicting the long-term creep strengths and lifetimes of modified 9Cr-1Mo steel

Correlation Analysis of Established Creep Failure Models through Computational Modelling for SS-304 Material

A New Method of Creep Ruptures Data Extrapolation Based on the Work

New Creep Crack Growth Prediction Model for the Life Assessment of Stainless-Steel Material Using Computational Modeling

Application of soft constrained machine learning algorithms for creep rupture prediction of an austenitic heat resistant steel Sanicro 25

Rationalization of Creep Data of Creep-Resistant Steels on the Basis of the New Power Law Creep Equation

A New Model for Life Estimation of Creep

A New Creep Constitutive Relationship for High Temperature Alloys

Comparison of a New Sin-Hyperbolic Creep Damage Constitutive Model with the Classic Kachanov-Rabotnov Model Using Theoretical and Numerical Analysis