Abstract:In the present study, polydimethylsiloxane (PDMS) porous scaffolds are designed based on minimal surface architectures and fabricated through a low-cost and accessible sacrificial mold printing approach using a fused deposition modeling (FDM) 3D printer. The effects of pore characteristics on compressive properties and fluid permeability are studied. The results suggest that radially gradient pore distribution (as a potential way to enhance mechanically-efficient scaffolds with enhanced cell/scaffold integration) has higher elastic modulus and fluid permeability compared to their uniform porosity counterparts. Also, the scaffolds are fairly strain-reversible under repeated loading of up to 40% strain. Among different triply periodic minimal surface pore architectures, P-surface was observed to be stiffer, less permeable and have lower densification strain compared to the D-surface and G-surface-based pore shapes. The biocompatibility of the created scaffolds is assessed by filling the PDMS scaffolds using mouse embryonic fibroblasts with cell-laden gelatin methacryloyl which was cross-linked in situ by UV light. Cell viability is found to be over 90% after 4 days in 3D culture. This method allows for effectively fabricating biocompatible porous organ-shaped scaffolds with detailed pore features which can potentially tailor tissue regenerative applications. STATEMENT OF SIGNIFICANCE: Printing polymers with chemical curing mechanism required for materials such as PDMS is challenging and impossible to create high-resolution uniformly cured structures due to hard control on the base polymer and curing process. An interconnected porous mold with ordered internal architecture with complex geometries were 3D printed using low-cost and accessible FDM technology. The mold acted as a 3D sacrificial material to form internally architected flexible PDMS scaffolds for tissue engineering applications. The scaffolds are mechanically stable under high strain cyclic loads and provide enough pore and space for viably integrating cells within the gradient architecture in a controllable manner.

Microfluidic 3D Printing of Emulsion Ink for Engineering Porous Functionally Graded Materials

3D freeform printing of silk fibroin

3D Printing Functionally Graded Porous Materials for Simultaneous Fabrication of Dense and Porous Structures in Membrane‐Integrated Fluidic Devices

An active mixing printhead for PDMS-based functionally gradient material substrate using variable stiffness electric-field-driven jet deposition 3D printing

Fabrication and Functionalization of 3D Printed Polydimethylsiloxane‐Based Microfluidic Devices Obtained through Digital Light Processing

Ink Based on the Tunable Swollen Microsphere for a 3D Printing Hydrogel with Broad-Range Mechanical Properties

On-demand modulation of 3D-printed elastomers using programmable droplet inclusions

3D Printing of Materials with Spatially Non-Linearly Varying Properties

Direct Ink Write 3D Printing of Fully Dense and Functionally Graded Liquid Metal Elastomer Foams (Adv. Funct. Mater. 46/2024)

3D Printing by Multiphase Silicone/Water Capillary Inks

Microfluidic fiber spinning for 3D bioprinting: Harnessing microchannels to build macrotissues

Advancements in Functionally Graded Polyether Ether Ketone Components: Design, Manufacturing, and Characterisation Using a Modified 3D Printer

Permeability and mechanical properties of gradient porous PDMS scaffolds fabricated by 3D-printed sacrificial templates designed with minimal surfaces

Lubricating Micro‐Interface Assisted General Strategy for Preparing dECM‐Microparticle–Based Heterogeneous Granular Inks toward 3D Printing

Fabrication process of smooth functionally graded materials through a real-time inline control of the component ratio

3D Printing of Microgel Scaffolds with Tunable Void Fraction to Promote Cell Infiltration

3D bioprinting of hydrogel/ceramic composites with hierarchical porosity

Microfluidics-enabled functional 3D printing

Tunable Resins with PDMS-like Elastic Modulus for Stereolithographic 3D-printing of Multimaterial Microfluidic Actuators

Multimaterial Microfluidic 3D Printing of Textured Composites with Liquid Inclusions

Structure-Processing-Property Relationships of 3D Printed Porous Polymeric Materials