Abstract:Liquid‐metal alloys are now extensively used for stretchable electronic applications due to their superior electrical conductivity, non‐toxicity, and mechanical stability in micro‐channels. Needle‐injection and direct‐writing are the most popular techniques for patterning micro‐structured liquid metal alloys. However, embedded channels often require a very high pressure to inject liquid‐metal, and direct writing by dispensing is relatively complex due to the low viscosities and high surface tension of the metal which cause liquid to normally dispense in droplets rather than a stream. In this work, a technique to co‐axially extrude liquid‐metal alloy within an encapsulating cover fluid has been presented to obtain a continuous stable stream of liquid‐metal. Fused deposition modeling (FDM) 3D printing has been adapted to co‐extrude a liquid‐metal core with a shell made from a thermoplastic elastomer. A custom extruder system is used to directly produce conductive micro‐wires (diameter: ≈25 μm) of liquid‐metal having an insulating shell of styrene‐ethylene‐butylene‐styrene which can be stretched up to four times the original length without any noticeable mechanical and electrical loss. The system is capable of printing in‐plane conductive pathways as well as out‐of‐plane functional devices with direct‐stable encapsulation of liquid‐metal wires. This technology has been successfully used to print 2D‐pressure and 3D‐strain sensors. A multi‐material extruder system is developed to coaxially extrude a liquid metal core with a thermoplastic elastomer shell. This technology allows direct printing of liquid metal‐based 2D pressure and 3D strain sensors. The technique is capable of producing micro‐wires with liquid metal cores of 25 μm diameter when combined with drawing steps. These micro‐wires are extremely flexible and stretchable up to 300% without substantial mechanical or electrical changes.

Direct Ink Write 3D Printing of Fully Dense and Functionally Graded Liquid Metal Elastomer Foams (Adv. Funct. Mater. 46/2024)

On‐Demand Programming of Liquid Metal‐Composite Microstructures through Direct Ink Write 3D Printing (Adv. Mater. 20/2022)

On‐Demand Programming of Liquid Metal‐Composite Microstructures through Direct Ink Write 3D Printing

Microfluidic 3D Printing of Emulsion Ink for Engineering Porous Functionally Graded Materials

Direct ink writing of programmable functional silicone‐based composites for 4D printing applications

Direct 3D Printing of Stretchable Circuits via Liquid Metal Co‐Extrusion Within Thermoplastic Filaments

Direct Ink Writing: A 3D Printing Technology for Diverse Materials

Three-Dimensional Coprinting Of Liquid Metals For Directly Fabricating Stretchable Electronics

3D Printing High‐Resolution Conductive Elastomeric Structures with a Solid Particle‐Free Emulsion Ink

Advective Assembler‐Enhanced Support Bath Rotational Direct Ink Writing

Dual feed progressive cavity pump extrusion system for functionally graded direct ink write 3D printing

On-demand modulation of 3D-printed elastomers using programmable droplet inclusions

Unstructured Direct Ink Write 3D Printing of Functional Structures with Ambient Temperature Curing Dual‐Network Thermoset Ink

Liquid Metal Direct Write and 3D Printing: A Review

A promising approach to 3D printing of metal foam with defined porosity

Direct-ink-writing (DIW) 3D printing functional composite materials based on supra-molecular interaction

3D‐Printed Multi‐scale Fluidics for Liquid Metals

Direct-write 3D printing of UV-curable composites with continuous carbon fiber

Multimaterial Microfluidic 3D Printing of Textured Composites with Liquid Inclusions

3D Printing Functionally Graded Porous Materials for Simultaneous Fabrication of Dense and Porous Structures in Membrane‐Integrated Fluidic Devices

Direct ink writing 3D printing of polydimethylsiloxane-based soft and composite materials: a mini review