Abstract:The structural, magnetocaloric, and magnetic characteristics in Heusler Ni50Mn35In10X5 (X = Ga, Fe, and Al) alloys were examined using X-ray diffraction and field-dependent magnetization measurements. All samples exhibited a mixture structure of cubic L21 and tetragonal L10 and underwent second-order magnetic transitions at TC(Al5) = 220 K, TC(Ga5) = 252 K, and TC(Fe5) = 298 K. The Ga5 alloy exhibited structural change as indicated by a thermal hysteresis that may be seen in the saturation magnetic field in the M(T) dependences. The transition at the TC point from a ferromagnetic to a paramagnetic state caused a drop in magnetization, supported by thermal hysteresis, at a low magnetic field (0.01 T). On the other hand, the Fe5 alloy presented a gradual decrease in magnetization with similar hysteresis behavior, also at a low magnetic field (0.01 T), whereas at 0.1 T of field, no features characteristic of this transition were detected. This could be due to a large difference in the metallic radius of Fe compared to that of In. Otherwise, magnetic investigations demonstrated that the replacement of In with Al may cause the structural transformation temperatures and TC to be shifted to low temperatures. The present results imply that the structural transformation temperatures and the transition itself are highly dependent on chemical composition. Furthermore, under a magnetic field change of 5 T, the maximum magnetic entropy changes of 0.6 J/kg K, 1.4 J/kg K, and 2.71 J/kg K for the Ga5, Fe5, and Al5 alloys, respectively, were determined by their TC. Refrigeration capacity values were found to be 25 J/kg, 74 J/kg, and 98 J/kg at µ0∆H = 5 T. These ribbons are viable candidates for multifunctional applications due to their cheaper cost and their physical characteristics disclosed during the magnetostructural transition, which takes place close to the room temperature.

The structural, magnetic and magnetocaloric properties of MnCrNiGeSi high-entropy alloy

Large Magnetocaloric Effect and Negative Thermal Expansion of Mn-Ni-Si-Fe-Co-Ge High-Entropy Alloys

Structure, Magnetic and Magnetocaloric Properties of Ni2MnGa Heusler Alloy Nanowires

Enhanced Magnetocaloric Properties of the (MnNi)0.6Si0.62(FeCo)0.4Ge0.38 High-Entropy Alloy Obtained by Co Substitution

Giant magnetocaloric effects of MnNiSi-based high-entropy alloys near room temperature

Curie Temperature Engineering in High Entropy Alloys for Magnetocaloric Applications

The Large Magnetocaloric Effect in GdErHoCoM (M = Cr and Mn) High-Entropy Alloy Ingots with Orthorhombic Structures

Effect of Mn Content on Crystallization Behaviors and Magnetic Properties of FeCoNiBMn High-Entropy Amorphous Alloys

Enhanced Soft Magnetic Properties of CoNi-Based High Entropy Alloys

Magnetocaloric properties of melt-spun MnFe-rich high-entropy alloy

Large reversible magnetocaloric effect in high-entropy MnFeCoNiGeSi system with low-hysteresis magnetostructural transformation

Study on a new high-entropy alloy Nd20Pr20La20Fe20Co10Al10 with hard magnetic properties

Structure and Stability of High Entropy CrMnFeCoNiCu Alloy

Chemical composition dependent local lattice distortions and magnetism in high entropy alloys

High-entropy alloys: Structure, mechanical properties, deformation mechanisms and application

Enhancing the magnetocaloric response of high-entropy metallic-glass by microstructural control

Comparison on structural andmagnetic properties of FeCoNi medium entropy alloy, FeCoNiAl and FeCoNiAlTi high entropy alloys

Fine tuning in-sync the mechanical and magnetic properties of FeCoNiAl0.25Mn0.25 high-entropy alloy through cold rolling and annealing treatment

Magnetocaloric effect and microstructure of amorphous/nanocrystalline HoErFe melt-extracted microwires

Structural, Magnetocaloric, and Magnetic Properties in Heusler Ni50Mn35In10X5 (X = Ga, Fe and Al) Alloys

Effect of Aluminum Addition on the Microstructure, Magnetic, and Mechanical Properties of FeCrCoNiMn High-Entropy Alloy