Abstract:This paper discusses the problems of resistance of the metal of the tubing branch pipe (tubing) to the process of its destruction in a medium containing hydrogen sulfide and when exposed to external forces. A 73х73 tubing nozzle made of 38G2SFA steel was selected as the material for research. The tubing fragment was destroyed during production well operation. To establish the reasons for the failure of the tubing nozzle, a visual inspection was carried out, tests were performed to assess the hardness and mechanical properties, the microstructure and microtexture of the metal were analyzed using scanning electron microscopy (SEM) methods. To analyze the nature of the distribution of introduced defects, the mutual orientation of structural components and crystallographic texture, studies were carried out by the method electron backscatter diffraction (EBSD). Studies of the suspended branch pipe, which does not have chemical protection, showed that the cause of its destruction was hydrogen sulfide stress corrosion cracking (SSCC) as a result of hydrogen embrittlement and the action of external tensile forces exceeding the yield strength of the metal. It was established that as a result of the interaction of hydrogen sulfide of the distilled product with the metal of the branch pipe, hydrogen embrittlement of the material of the branch pipe occurred. The process of hydrogen embrittlement of the fragment was proved by detecting hydrogen blisters in the metal microstructure and establishing the process of coalescence of neighboring inclusions. In addition, the results of the test to measure the hardness of the metal along the wall thickness further supported the hypothesis of hydrogen embrittlement of the tubing. EBSD analysis showed that the threaded part of the branch pipe is characterized by a small size of structural elements and an increased density of introduced defects (geometrically necessary dislocations), which are a promising site for the deposition of molecular hydrogen. It is concluded that reaching the limit concentration of molecular hydrogen reduces the binding energy of metal atoms and this process initiates the formation of pores. It has been established that the development of cracks along large-angle grain boundaries is facilitated, and small-angle and coincidence site lattice (Σ3, Σ5, Σ11 and Σ13b) grain boundaries are active barriers to crack propagation. It has been shown that by optimizing the elemental composition of steel, controlling the microstructure, crystallographic texture, as well as the type and state of grain boundaries, new pipeline steels can be produced that are more resistant to SSCC.

Effect of Structure and Nonmetallic Inclusions on Hydrogen Sulfide Cracking Resistance in Structural Pipe Steels

Influence of Inclusions on Hydrogen Induced Cracking of Oil Well Pipe Steel

An experimental and statistical study on the characteristics of non-metallic inclusions that serve as hydrogen-induced crack nucleation sites in pipeline steel

Study on Stress Corrosion Cracking Behavior of Incoloy825/X65 Bimetallic Composite Pipe Welded Joint in Wet Hydrogen Sulfide Environment

Effect Of Submicron-Scale Mns Inclusions On Hydrogen Trapping And Hic Susceptibility Of X70 Pipeline Steels

Experimental observations of nucleation and crack growth paths of hydrogen-induced cracking in pipeline steel

Effect of microstructure on hydrogen embrittlement and hydrogen-induced cracking behaviour of a high-strength pipeline steel weldment

Improving HIC resistance of pipe-steel by Ti/Mg treatment with insights into hydrogen migration

Effect of Microstructure on Hydrogen-induced Cracking Propagation and Hydrogen Trapping Efficiency of Pipeline Steel

Effect of Hydrogen Sulfide Containing Environment on the Characteristics of Strength, Cyclic Endurance and Magnetic Properties of Cr – Mo – V – Nb Pipe Steel

Effect of Hydrogen on Tensile Properties and Fracture Behavior of Two High-Strength American Petroleum Institute Linepipe Steels

FEATURES OF MICROSTRUCTURE FORMATION IN THE WELDED PIPE JOINTS DURING HIGH-FREQUENCY WELDING AND SUBSEQUENT LOCAL HEAT TREATMENT

Experimental research of hydrogen induced cracking (HIC) in welded joints of 16MnR steel in wet hydrogen sulfide environment

Research on Hydrogen-Induced Induced Cracking Sensitivity of X80 Pipeline Steel under Different Heat Treatments

Unveiling the mechanism behind irregular inclusions triggering no HIC cracks in steels

Effect of tempering temperature and inclusions on hydrogen-assisted fracture behaviors of a low alloy steel

Effect of Zr–Ti Deoxidisation on the Hydrogen-Induced Cracking of X65 Pipeline Steels

Sulfide Corrosion Cracking of Linepipe for Sour Gas Service

RESISTANCE OF FERRITE-PERLITE STEEL TUBING BRANCH PIPE METAL TO DESTRUCTION IN HYDROGEN SULFIDE MEDIUM

Role of microstructure heterogeneity on hydrogen-assisted fracture toughness degradation of X80 weld metal in H 2 S-saturated solution

Comparative Study of Non-Metallic Inclusions on the Critical Size for HIC Initiation and Its Influence on Hydrogen Trapping