Abstract:CONSPECTUS: To tackle the foreseen energy crisis and serious environmental problem caused by conventional energy resources, solar cells, or photovoltaics (PV), a technology that can directly convert sunlight to electricity has been considered to be one of the most important and cost-effective clean energy techniques that benefit the environment. So far, silicon-based PVs have dominated the market due to mature fabrication techniques and their relatively good power conversion efficiency (PCE) and excellent stability. In the past decades, metal halide perovskite PVs have been a major direction of current PV research owing to their intriguing optoelectronic performance. The record PCE of perovskite PV cells has unprecedently increased from an original 3.8 to 25.5%. The typical structure of a photovoltaic perovskite is ABX(3), where A refers to a monovalent cation such as methylammonium (MA(+)), cesium (Cs+), or formamidinium (FA(+)); B refers to a divalent cation such as Pb2+ or Sn2+; and X refers to a halide anion. In general, a perovskite PV device consists of an active layer of the perovskite absorber, which is connected by a hole-transporting layer (HTL) and an electron-transporting layer (ETL). In the beginning, the strategies to improve the PCEs mainly focused on developing an effective method to grow a smooth and continuous polycrystalline film. After the improvement of the baseline PCE of the perovskite PVs, various techniques were employed to reduce the defects of perovskite formed at grain boundaries and surfaces, further pushing the PCEs of perovskite PV devices to over 20%. In the meantime, the discovery of suitable and low-cost interfacial materials such as electron-transporting materials and hole-transporting materials has appealed to the attention of the perovskite research community to accelerate the commercialization of the perovskite PVs. In this Account, we start from our efforts to develop facile and effective fabrication strategies to obtain smooth and continuous polycrystalline perovskite thin films, including vapor-assisted and moisture-assisted perovskite crystal growth. The strategies and the in-depth mechanisms of preventing the formation of specific detrimental defects accumulated at grain boundaries or the surface are also portrayed by designing various passivation molecules with certain functional groups, such as carbonyl groups, amine groups, or sulfonic groups. Some systematically designed electron- or hole-transporting materials to improve the charge extraction and collection efficiency in perovskite PV devices are discussed as well. Finally, future perspectives for further enhancing the long-term stability and PCE are proposed to accelerate the commercialization of perovskite PV devices in the next decade.

Optimization of the Anti-Solvent Method for the Fabrication of Cu Electrode-Based High-Efficiency Perovskite Solar Cell

Antisolvent Engineering On Low-Temperature Processed Cspbi3 Inorganic Perovskites For Improved Performances Of Solar Cells

Optimization of Anti-Solvent Engineering Toward High Performance Perovskite Solar Cells

Morphology Control towards Green Solvent System Processed High Performance Semitransparent CH3NH3PbI3 Film for Perovskite Solar Cell

Improving the Stability and Efficiency of Perovskite Solar Cells by Controlling the Crystallization Active Layer with Binary Anti-solvent

Co‐Solvent Engineering Contributing to Achieve High‐Performance Perovskite Solar Cells and Modules Based on Anti‐Solvent Free Technology

Tailored Key Parameters of Perovskite for High-Performance Photovoltaics

Antisolvents Treatment of Cs 0.15 FA 0.85 PbI 3 Boosting Efficiency for Perovskite Solar Cells

Morphology Optimization of Perovskite Films for Efficient Cells and Modules through Solvent Engineering

Selection of an anti-solvent for efficient and stable cesium-containing triple cation planar perovskite solar cells

A Feasible and Effective Post-Treatment Method for High-Quality CH3NH3PbI3 Films and High-Efficiency Perovskite Solar Cells

Anti-solvent Engineering for Efficient Perovskite Solar Cell Using PVK as Hole-Transporting Layer

Co‐Solvent Assisted Optimization of the CuSCN Hole Transport Layer for Enhancing the Efficiency of Ambient Processable Perovskite Solar Cells with Carbon Counter Electrodes

An Extraordinary Antisolvent Ethyl Cyanoformate for Achieving High Efficiency and Stability P3HT‐Based CsPbI3 Perovskite Solar Cells

Improving the Efficiency of Perovskite Solar Cells Through Optimization of the CH 3 NH 3 PbI 3 Film Growth in Solution Process Method

A General Approach to High Efficiency Perovskite Solar Cells by Any Antisolvent

Spontaneously supersaturated nucleation strategy for high reproducible and efficient perovskite solar cells

Anti‐Solvent‐Free Fabrication of Stable FA0.9Cs0.1PbI3 Perovskite Solar Cells with Efficiency Exceeding 24.0% through a Naphthalene‐Based Passivator

Anti-Solvent Engineering Enables Efficient Ambient-Processed Halide Perovskite Solar Cells

Crystallinity Control and Strain Release in Wide-Bandgap Perovskite Film via Seed-Induced Growth for Efficient Photovoltaics

Green antisolvent additive engineering to improve the performance of perovskite solar cells