Abstract:With the development of new energy, the photovoltaic industry has attracted widespread attention. In response to perovskite solar cells, a device structure is proposed, consisting of indium tin oxide (ITO)/poly(3,4‐ethylenedioxythiophene):polystyrene sulfonate(PEDOT:PSS)/methylammonium lead iodide (MAPbI3)/tin oxide(SnO2)/aurum(Au) from top to bottom. By software testing the key parameters affecting the performance of perovskite solar cells, the cells are optimized, and the photoelectric conversion efficiency reached 25.78%. This lays the foundation for the subsequent preparation of efficient perovskite solar cells. Methylammonium lead iodide (MAPbI3) is a kind of perovskite material, which can effectively absorb photons in sunlight, with an adjustable band gap and relatively stable performance. Aiming at the problem of photoelectric conversion efficiency of perovskite solar cells, this paper proposes a perovskite solar cell with MAPbI3 as an absorption layer. The device structure adopts a trans structure with good stability and low cost, and the hole transport layer adopts poly(3,4‐ethylenedioxythiophene):polystyrene sulfonate(PEDOT:PSS) material, which has good electrical properties and interface properties, and has certain transparency. The electron transport layer adopts tin oxide (SnO2), and its energy band structure is beneficial to carrier transport, and it has excellent electron transport performance and chemical stability, which makes it a material for the electron transport layer. The top electrode and the bottom electrode are made of indium tin oxide (ITO) and aurum (Au) with high reliability respectively. The thickness, band gap, and defect concentration of the battery are simulated by solar cell capacitance simulator (SCAPS) software. The results show that the thickness and band gap of the absorption layer has great influence on the performance of the battery. The open‐circuit voltage, short‐circuit current density, filling factor and photoelectric conversion efficiency of the optimized perovskite solar cell reached 1.219 V, 30.1641 mA cm−2, 70.14%, and 25.78% respectively.

Anti-solvent Engineering for Efficient Perovskite Solar Cell Using PVK as Hole-Transporting Layer

Antisolvent Engineering On Low-Temperature Processed Cspbi3 Inorganic Perovskites For Improved Performances Of Solar Cells

Enhancing the Performance of Perovskite Solar Cell Via Optimizing the Solvent of Hole Transport Layer

Poly(9-vinylcarbazole) as a hole transport material for efficient and stable inverted planar heterojunction perovskite solar cells

Phase Engineering of Perovskite Materials for High-Efficiency Solar Cells: Rapid Conversion of CH3NH3PbI3 to Phase-Pure CH3NH3PbCl3 Via Hydrochloric Acid Vapor Annealing Post-Treatment

Optimization of the Anti-Solvent Method for the Fabrication of Cu Electrode-Based High-Efficiency Perovskite Solar Cell

Morphology Control towards Green Solvent System Processed High Performance Semitransparent CH3NH3PbI3 Film for Perovskite Solar Cell

Highly Efficient Perovskite Solar Cell Based on PVK Hole Transport Layer

Improving the photovoltaic performance of planar heterojunction perovskite solar cells by mixed solvent vapor treatment

Interfacial Passivation of the p-Doped Hole-Transporting Layer Using General Insulating Polymers for High-Performance Inverted Perovskite Solar Cells

Mixed antisolvents assisted treatment of perovskite for photovoltaic device efficiency enhancement

Radical reinforced defect passivation strategy for efficient and stable MAPbI 3 perovskite solar cells fabricated in air using a green anti-solvent process

Improving the Stability and Efficiency of Perovskite Solar Cells by Controlling the Crystallization Active Layer with Binary Anti-solvent

Tuning interfacial chemical interaction for high-performance perovskite solar cell with PEDOT:PSS as hole transporting layer

Solvent engineering for high-performance inorganic–organic hybrid perovskite solar cells

Buried Solvent Assisted Perovskite Crystallization for Efficient and Stable Inverted Solar Cells

Study on Performance Optimization of Perovskite Solar Cells Based on MAPbI3

A low-cost polymerized hole-transporting material for high performance planar perovskite solar cells

Crystallization and Defect Chemistry Dual Engineering for MAPbI 3 Perovskite Solar Cells with Efficiency Approaching 22%

Suppressing Defects‐Induced Nonradiative Recombination for Efficient Perovskite Solar Cells through Green Antisolvent Engineering

High-performance hybrid perovskite solar cells with polythiophene as hole-transporting layer via electrochemical polymerization