Abstract:Lateral structure photodetectors based only on formamidinium lead triiodide perovskite active material still present moderate performance and poor stability. Herein, a strategy to effectively improve the photosensitive performance, ambient stability, and flexibility performance of the formamidinium‐based perovskite photodetector by employing high‐mobility small organic molecule semiconductor modification is proposed. Organic–inorganic hybrid perovskite has attracted extensive research due to its excellent optoelectronic properties and is a competitive candidate material for a new generation of photodetectors. However, lateral structure photodetectors based only on perovskite active materials still present moderate performance and poor stability. Herein, lateral structure formamidinium‐based perovskite FA0.9Cs0.1PbI3 photodetectors are reported which are modified by a solution‐processed organic semiconductor 2,7‐dioctyl[1]benzothieno[3,2‐b][1]benzothiophene (C8‐BTBT) layer for improved photosensitive performance and ambient/flexibility stability. High‐mobility organic semiconductor C8‐BTBT serves as an efficient hole transport layer that fills the grain boundaries and gaps of the FA0.9Cs0.1PbI3 film, enabling rapid extraction and transport of the photo‐generated carriers from the perovskite to the electrodes, resulting in enhanced photosensitive performance of the photodetector. Compared with the original device, the C8‐BTBT‐modified photodetector exhibits dramatically improved performance with a best responsivity of 1278 mA W−1, specific detectivity of 1.58 × 1012 Jones, external quantum efficiency of 298%, and fall time of 14.09 ms, which is 10.84 times less than 152.76 ms of the pure perovskite device. Moreover, the C8‐BTBT film acts as a protective layer for the FA0.9Cs0.1PbI3 film because of its good air stability and effective coverage, which significantly improves the ambient stability of the perovskite photodetector compared with the original device, increasing photocurrent retention from 2.5% to 61.5% or 81.5% at different humidity after 6 days. Furthermore, the C8‐BTBT‐modified perovskite photodetector exhibits outstanding flexibility performance, with only a 5% reduction in photocurrent under bending and almost no change after 200 bending cycles, while those of the pristine perovskite device have degraded to ≈80% and ≈75% under the same conditions, respectively. This study provides a facile and effective solution‐processed‐based strategy for constructing high‐performance and stable perovskite photodetectors.

Novel 3D Printing Encapsulation Strategies for Perovskite Photodetectors

Two‐dimensionalization of 3D Perovskites for Passive Narrowband Photodetection

Enhancement of the Environmental Stability of Perovskite Thin Films via PMMA and AZ5214-Photoresist Coatings

In‐situ Polymer Framework Strategy Enabling Printable And Efficient Perovskite Solar Cells by Mitigating "Coffee Ring" Effect

Reactive Inhibition Strategy for Triple‐cation Mixed‐halide Perovskite Ink with Prolonged Shelf‐life

Highly Deformable High-Performance Paper-Based Perovskite Photodetector with Improved Stability

High-performance and stable 2D/3D perovskite photodetectors enabled by PEAI passivation

Evaluation of the underwater stability of encapsulated perovskite solar cells

Controllable printing of large-scale compact perovskite films for flexible photodetectors

Stable and broadband photodetectors based on 3D/2D perovskite heterostructures with surface passivation

Research Progress on the Stability of Organic–Inorganic Halide Perovskite Photodetectors in a Humid Environment Through the Modification of Perovskite Layers

Interfacial Passivation and Energy Level Alignment Regulation for Self‐Powered Perovskite Photodetectors with Enhanced Performance and Stability

Carbonized polymer dots enhanced stability and flexibility of quasi-2D perovskite photodetector

An interfacial toughening strategy for high stability 2D/3D perovskite X-ray detectors with a carbon nanotube thin film electrode

Innovative Materials for Lamination Encapsulation in Perovskite Solar Cells

A Photolithography-Free Fabrication Strategy for Perovskite Photodetector Array with High-Security Imaging Application

Defect Passivation Strategies in Two‐Dimensional Organic–Inorganic Hybrid Perovskites for Enhanced Photoelectric Performance

Waterproof and Flexible Perovskite Photodetector Enabled By P‐type Organic Molecular Rubrene with High Moisture and Mechanical Stability

Progress on the stability and encapsulation techniques of perovskite solar cells

Polymer-Assisted Phase Stable -CsPbI<sub>3</sub> Perovskite Film for Self-Powered and Ultrafast Photodiodes

Performance Improvement of Formamidinium‐Based Perovskite Photodetector by Solution‐Processed C8‐BTBT Modification