Abstract:Lateral structure photodetectors based only on formamidinium lead triiodide perovskite active material still present moderate performance and poor stability. Herein, a strategy to effectively improve the photosensitive performance, ambient stability, and flexibility performance of the formamidinium‐based perovskite photodetector by employing high‐mobility small organic molecule semiconductor modification is proposed. Organic–inorganic hybrid perovskite has attracted extensive research due to its excellent optoelectronic properties and is a competitive candidate material for a new generation of photodetectors. However, lateral structure photodetectors based only on perovskite active materials still present moderate performance and poor stability. Herein, lateral structure formamidinium‐based perovskite FA0.9Cs0.1PbI3 photodetectors are reported which are modified by a solution‐processed organic semiconductor 2,7‐dioctyl[1]benzothieno[3,2‐b][1]benzothiophene (C8‐BTBT) layer for improved photosensitive performance and ambient/flexibility stability. High‐mobility organic semiconductor C8‐BTBT serves as an efficient hole transport layer that fills the grain boundaries and gaps of the FA0.9Cs0.1PbI3 film, enabling rapid extraction and transport of the photo‐generated carriers from the perovskite to the electrodes, resulting in enhanced photosensitive performance of the photodetector. Compared with the original device, the C8‐BTBT‐modified photodetector exhibits dramatically improved performance with a best responsivity of 1278 mA W−1, specific detectivity of 1.58 × 1012 Jones, external quantum efficiency of 298%, and fall time of 14.09 ms, which is 10.84 times less than 152.76 ms of the pure perovskite device. Moreover, the C8‐BTBT film acts as a protective layer for the FA0.9Cs0.1PbI3 film because of its good air stability and effective coverage, which significantly improves the ambient stability of the perovskite photodetector compared with the original device, increasing photocurrent retention from 2.5% to 61.5% or 81.5% at different humidity after 6 days. Furthermore, the C8‐BTBT‐modified perovskite photodetector exhibits outstanding flexibility performance, with only a 5% reduction in photocurrent under bending and almost no change after 200 bending cycles, while those of the pristine perovskite device have degraded to ≈80% and ≈75% under the same conditions, respectively. This study provides a facile and effective solution‐processed‐based strategy for constructing high‐performance and stable perovskite photodetectors.

Research Progress on the Stability of Organic–Inorganic Halide Perovskite Photodetectors in a Humid Environment Through the Modification of Perovskite Layers

Study on the stability of organic–inorganic perovskite solar cell materials based on first principle

Improved photoemission and stability of 2D organic-inorganic lead iodide perovskite films by polymer passivation

Improving the Stability of Halide Perovskites for Photo‐, Electro‐, Photoelectro‐Chemical Applications

An overview of the decompositions in organo-metal halide perovskites and shielding with 2-dimensional perovskites

Stabilization Techniques of Lead Halide Perovskite for Photovoltaic Applications

Waterproof and Flexible Perovskite Photodetector Enabled By P‐type Organic Molecular Rubrene with High Moisture and Mechanical Stability

Performance Improvement of Formamidinium‐Based Perovskite Photodetector by Solution‐Processed C8‐BTBT Modification

A critical review on the moisture stability of halide perovskite films and solar cells

Metal Halide Perovskites: Stability and Sensing-Ability

Stability Issues on Perovskite Solar Cells

Material and Device Stability in Perovskite Solar Cells

Reviewing and Understanding the Stability Mechanism of Halide Perovskite Solar Cells

Imaging the Moisture-Induced Degradation Process of 2D Organolead Halide Perovskites

Structural characterizations on the degradation of 2D organic–inorganic hybrid perovskites and its enlightenment to improved stability

Investigation of CH3NH3PbI3 degradation rates and mechanisms in controlled humidity environments using in situ techniques.

Achieving a Highly Stable Perovskite Photodetector with a Long Lifetime Fabricated via an All-Vacuum Deposition Process

Ab initio study of the moisture stability of lead iodine perovskites

Interface Engineering Driven Stabilization of Halide Perovskites against Moisture, Heat, and Light for Optoelectronic Applications

Intrinsic Instability of Inorganic–Organic Hybrid Halide Perovskite Materials

A Heat‐Liquefiable Solid Precursor for Ambient Growth of Perovskites with High Tunability, Performance and Stability