Abstract:The objectives of this study were to investigate the physicochemical dissolution of chrysotile asbestos and to synthesize nano-sized materials and carbonate minerals from the asbestos via acid dissolution and pH changes. Chrysotile asbestos powder was dissolved in 3 different acids, HCl, HThe objectives of this study were to investigate the physicochemical dissolution of chrysotile asbestos and to synthesize nano-sized materials and carbonate minerals from the asbestos via acid dissolution and pH changes. Chrysotile asbestos powder was dissolved in 3 different acids, HCl, H₂SO₄, and HNO₃, and the solutions were then titrated using NH₄OH and reacted with CO₂. The residual material and precipitates were examined with XRD and TEM-EDS. ICP-AES analysis was also used to investigate the chemical makeup of the solution. The concentration of Mg in the solution was about 1,280 mg/L. The chrysotile became noncrystalline silica after acid treatment (pH = 0). At pH 8.6 and 9.5, the precipitates were amorphous iron oxide and nesquehonite [Mg(HCO3)(OH)·2(H₂O)] after reaction with CO₂. The particle size of the precipitates ranged from 2 to 500 nm. These results indicate that dissolution of chrysotile asbestos using HCl, H₂SO4, and HNO3 can chemically alter chrysotile fibers. Also, the dissolved materials can be used as precursors for other materials such as silica, iron oxide, and carbonates. This process may be useful for the synthesis of silica and iron oxides and for mineral carbonation for carbon sequestration. SO4, and HNO₃, and the solutions were then titrated using NH4OH and reacted with CO₂. The residual material and precipitates were examined with XRD and TEM-EDS. ICP-AES analysis was also used to investigate the chemical makeup of the solution. The concentration of Mg in the solution was about 1,280 mg/L. The chrysotile became noncrystalline silica after acid treatment (pH = 0). At pH 8.6 and 9.5, the precipitates were amorphous iron oxide and nesquehonite [Mg(HCO₃)(OH)·2(H₂O)] after reaction with CO₂. The particle size of the precipitates ranged from 2 to 500 nm. These results indicate that dissolution of chrysotile asbestos using HCl, H₂SO₄, and HNO3 can chemically alter chrysotile fibers. Also, the dissolved materials can be used as precursors for other materials such as silica, iron oxide, and carbonates. This process may be useful for the synthesis of silica and iron oxides and for mineral carbonation for carbon sequestration.

Recycling of chrysotile-asbestos production waste

Electrothermal processing of chrysotile-asbestos wastes with production of ferroalloy and extraction of magnesium into the gas phase

Diopside-Based Glass-Ceramics from Chrysotile Asbestos Tailing

From Automotive Shredder Residue to Nano-Ceramics and Graphitic Carbon—thermal Degradation Kinetics

Modeling of Non-Ferrous Metallurgy Waste Disposal with the Production of Iron Silicides and Zinc Distillation

Synthesis of Nano-Sized Silicon Oxide, Iron Oxide and Carbonates from Chrysotile Asbestos

Mechanochemical conversion of chrysotile/K2HPO4 mixtures into potential sustainable and environmentally friendly slow-release fertilizers

Thermal synergistic treatment of municipal solid waste incineration (MSWI) fly ash and fluxing agent in specific situation: Melting characteristics, leaching characteristics of heavy metals

The Direct Alloying of Steel through Silicothermic Self-Reduction of Chromite Ore Utilizing Si-Containing Solid Waste

Simultaneous recycling of Si and Ti from diamond wire saw silicon powder and Ti-bearing blast furnace slag via reduction smelting: An investigation of the effects of refractories on recycling

The Study on the Purification of Waste Graphite Thermal Field Material of FZ-Si Crystal

Development of a technology for producing ceramic refractory material in a composition of montmorillonite clays (bentonite-like) and ferrochrome production wastes

PRODUCTION OF FERROALLOYS, CALCIUM CARBIDE, AND PHOSPHORUS FROM HIGH-SILICON PHOSPHORITE

Effects of Temperature on the Migration Behaviour of Arsenic and Chromium in Tannery Sludge under CO2 Gasification.

Investigation of Thermal and Mechanical Properties of Refractory Materials Produced from Metallurgical Waste

Defining the features of structural and phase transformations in the recycling of anthropogenic metallurgical waste containing refractory elements

Reuse of spent FCC catalyst, waste serpentine and kiln rollers waste for synthesis of cordierite and cordierite-mullite ceramics

Innovative methodology for the utilization of low-grade pyrite cinder containing heavy metals via hydrothermal alkali melting followed by chlorination roasting

Effects of temperature on the migration behaviour of arsenic and chromium in tannery sludge under CO 2 gasification

Environmental Toxicity Analysis and Reduction of Ceramsite Synthesis from Industrial Coal Gasification Coarse Cinder Waste

Recycling of Silicone Rubber from Composite Insulator with Pyrolysis Method