Abstract:The effects of thermal treatments on metallic glass nanolaminates (NLs), with a composition of Zr$_{24}$Cu$_{76}$ and Zr$_{61}$Cu$_{39}$ and a bilayer period of 50 nm, were explored to control their mechanical properties through annealing-induced atomic structure modifications, structural relaxation, and partial crystallisation. Annealing treatments up to 330 °C ($T$ < $T_g$, the glass transition temperature) maintain the amorphous structure of the NLs, while inducing atomic structural relaxation, densification, and free volume annihilation, reducing the formation of corrugations on fracture surfaces. Atom probe tomography measurements reveal that annealing at 330 °C for 60 mins also causes intermixing between layers, altering their compositions to Zr$_{44}$Cu$_{56}$ and Zr$_{55}$Cu$_{45}$ with increased mixing enthalpy. Moreover, the NLs exhibit superior thermal stability against crystallisation compared to their monolithic counterparts, remaining amorphous up to 420 °C, while the monolithic Zr$_{24}$Cu$_{76}$ and Zr$_{61}$Cu$_{39}$ films are crystalline at 390 °C, as a result of chemical interdiffusion and the heterogeneous NL structure of delaying the onset of crystallisation. Annealing treatments $T$ > $T_g$ ($\sim$420 °C) induce partial crystallisation, forming Cu-Zr-based intermetallic and Zr-oxide phases, whereas annealing $T$ < $T_g$ (330 °C) retains a visible layer structure. Nanoindentation analyses show a progressive increase in elastic modulus and hardness for higher annealing temperatures as a result of structural relaxation and likely nanocrystal formation, with a maximum hardness equal to 7.6 $\pm$ 0.2 GPa obtained after heat treatment at 420 °C for 60 mins and exceeding the rule-of-mixtures. These results highlight the potential of thermal treatments to tailor the structural, mechanical and thermal properties of metallic glass NLs.

Metallurgical Behavior of Amorphous Alloy during Annealing at Different Temperatures via Molecular Dynamics Simulation

Atomic level simulation of amorphous/nanocrystalline transition behavior in the Fe based amorphous alloys

The effect of thermal history on the atomic structure and mechanical properties of amorphous alloys

Crystallization of Amorphous Alloy During Isothermal Annealing: a Molecular Dynamics Study

Low-Temperature Annealing Induced Amorphization in Nanocrystalline NiW Alloy Films

Crystallization of Bulk Amorphous Alloy (Fe40ni40p14b6)(96)ga-4 in Supercooled Liquid Region

The Effects of Annealing on the Microstructure and the Dynamic Mechanical Strength of a ZrCuNiAl Bulk Metallic Glass

Atomic Simulation on Evolution of Nano-Crystallizaion in Amorphous Metals

Beating Homogeneous Nucleation and Tuning Atomic Ordering in Glass-Forming Metals by Nanocalorimetry

Structural evolution during mechanical milling and subsequent annealing of Cu–Ni–Al–Co–Cr–Fe–Ti alloys

Crystallization behavior of ZrAlNiCu bulk metallic glass with wide supercooled liquid region

Effects of cooling rate and sub-Tg annealing on Ni80P20 metallic glass: A molecular dynamic (MD) study

Ab Initio Molecular Dynamics Simulation on the Glass Forming Ability of Ni-Metalloid Amorphous Alloys

Nanoscale Structural Evolution and Anomalous Mechanical Response of Nanoglasses by Cryogenic Thermal Cycling

The atomic-scale nucleation mechanism of NiTi metallic glasses upon isothermal annealing studied via molecular dynamics simulations

Crystallization behaviour of Al-based metallic glasses below and above the glass-transition temperature

Thermal modification of ZrCu metallic glass nanolaminates: Structure and mechanical properties

Crystallization mechanism of Zr55Cu30Al10Ni5 metallic glass in an extended range of heating rates

Evolution of the Primary Crystals and the Amorphous Matrix Following Annealing of a Bulk Zr56.6Cu17.3Ni12.5Al9.6Ti4 Metallic Glass

Atomic Structure and Thermal Stability of Interfaces Between Metallic Glass and Embedding Nano-Crystallites Revealed by Molecular Dynamics Simulations

Mechanism of low thermal conductivity for Fe76Si13B8Nb2Cu1 amorphous and nanocrystalline alloys at room temperature