Abstract:The residual stress reductions of metals enabled by external field treatments are of high industrial significance, such as pulsed magnetic treatment (PMT) and coupled electromagnetic treatment (CET). There still exist sophisticated issues regarding process comparison and mechanism. In the present work, both the PMT and the CET were used to reduce the residual stress in P10 carbide tools. Besides residual stress measurements and microscopic observations of dislocations in the tested tools, a new model for modelling dislocation interactions in the treated tools was developed to reveal more complex mechanisms of the microstructural changes induced by the external fields. The results obtained with the X-ray diffraction method demonstrated a 30% stress reduction with the PMT and a 65% reduction with the CET. The dislocation morphology observed with a Transmission Electron Microscope was examined on their characteristics, quantity, and distribution. It was suggested that the WC phase with the dislocation of multiple quantities and wide distribution could be obtained easily through the CET. Deformation displacements and directions, internal stresses and volume strains, calculated using a transient 3D model with COMSOL (Multiphysics software), were compared. It was quantitatively confirmed that the internal stress produced both the PMT and the CET could force the dislocation to move. Compared with the PMT, there was a mutation phenomenon of the stress magnitude and direction during the CET, which was more conducive to the dislocation multiplication and dislocation interaction. The proposed Opposite Sign Parallel Dislocation Interaction Model also showed that the interactions between dislocations could effectively reduce the lattice distortion at the severe distortion area of the dislocations. The study showed that the residual stress could be effectively reduced by the evenly enhanced dislocation stretching and compression asymmetry after dislocation multiplication.

Pulsed Magnetic Treatment of Cobalt for Enhanced Microstructures and Mechanical Properties

Pulsed Magnetic Field Treatment of WC-TiC-Co Cutting Inserts for Improved Microstructure and Cutting Performance

Magnetic induced re-dissolution and microstructure modifications on mechanical properties of Cr4Mo4V steel subjected to pulsed magnetic treatment

Mechanism and Application of Mechanical Property Improvements in Engineering Materials by Pulsed Magnetic Treatment: A Review

Effect of Pulsed Magnetic Field on the Microstructure of TC4 Titanium Alloy and Its Mechanism

Effect of high magnetic field treatment on the microstructure and mechanical properties of Ti-48Al-2Cr-2Nb alloy prepared by powder-hot isostatic pressing

Microstructure evolution, diffusion behavior, and mechanical properties of a Cu/AlCoCrFeNi 2.1 composite under pulsed magnetic field

Effect of a pulsed magnetic treatment on the dislocation substructure of a commercial high strength steel

Microstructural Modification and Mechanical Improvement of Ultrafine-Grained Ti Alloy Through Electron Wind Force: an Innovative Approach

Combined Current-Modulation Annealing Induced Enhancement Of Giant Magnetoimpedance Effect Of Co-Rich Amorphous Microwires

Influence of a high pulsed magnetic field on the tensile properties and phase transition of 7055 aluminum alloy

Effects of Pulsed Magnetic Fields of Different Intensities on Dislocation Density, Residual Stress, and Hardness of Cr4Mo4V Steel

Interface Strengthening for Thermal Sprayed WC-10Co4Cr Coating Subjected to Pulsed Magnetic Treatment

Enhanced Low Cycle Fatigue Properties of Ti-6Al-4V Alloy by Post-treatment Technology of Pulse High-Intensity Magnetic Field

Plastic Deformation Caused by Pulsed Magnetic Treatment of Mid-Carbon Steel

Mechanism for magnetic field induced structural relaxation and accompanying fracture toughness improvement of the thermal spraying coating

Electrochemical corrosion behavior variation of WC-10Co4Cr coating subjected to different magnetic treatments and its mechanism

Tailoring the microstructure and properties of a Cu–Co immiscible alloy by high magnetic field assisted heat treatment

Microstructure and properties of TiAl-4822 alloy subject to the solid-state treatment with pulsed magnetic field

Residual stress reductions of carbide cutting tools through applying pulsed magnetic field and coupled electromagnetic field – mechanism analysis and comparison study

Effect of a pulsed magnetic field on the tribological properties of amorphous/nanocrystalline composite coatings by supersonic plasma spraying