Abstract:In this work, the effect of pulsed magnetic treatment (PMT) on the microstructure of TC4 titanium alloy was investigated. TC4 titanium alloy is widely used in the manufacture of the blade of aviation engine. The microstructure of TC4 titanium alloy determines its property. PMT is a novel method used to modify the microstructures of alloys and has been explored in several papers recently. PMT has many advantages in the aspect of efficiency, energy-saving, non-deformation, etc. Therefore, the effect of PMT on the microstructures of TC4 titanium alloy was explored in this work. The variation of the dislocation density and the grain boundary angle of TC4 titanium alloy was observed after PMT. In the experiment, the magnetic induction density is 2 T, the pulse frequency is 5 Hz and the pulse number is 100. According to XRD tests, the dislocation density in TC4 alloy after PMT increased about 10.9%. KAM maps in EBSD test were used for evaluating the same area's dislocation density of the TC4 alloy before and after PMT. The dislocation distribution of TC4 titanium alloy changes notably: the in-grain dislocation density became more homogeneous and some local high-density areas disappeared, the distribution of dislocation near grain boundaries caused the angles of the grain boundaries altered and the fraction of low-angle grain boundaries decreased while the fraction of Sigma 11 grain boundaries (CSL grain boundary) increased. The motivation mechanism of the dislocation in TC4 titanium alloy under PMT was speculated based on the experimental results and some previous researches. The PMT may change the energy state of the electrons in pinning area of dislocations, which accelerates the electrons transformation from singlet state to triplet state and then increases the mobility of the vacancy or impurity atoms so that the dislocation depinning could occur under the original stress field and thus leads to dislocation movement and transformation of microstructure.

Enhanced Low Cycle Fatigue Properties of Ti-6Al-4V Alloy by Post-treatment Technology of Pulse High-Intensity Magnetic Field

Improved fatigue life of SLM-produced TC4 alloy treated by a pulsed magnetic field

Enhancement Of Fatigue Life And Elongation Of Metallic Materials By High-Density Pulsed Electric-Current

Ultrahigh Deformability of Ti-6Al-4V Assisted by High-Density Pulsed Electric Current Treatment

Effect of Pulsed Magnetic Field on the Microstructure of TC4 Titanium Alloy and Its Mechanism

Improvement of Mechanical Properties of Titanium Alloy by High-Density Pulsed Electric Current

Microstructural Modification and Mechanical Improvement of Ultrafine-Grained Ti Alloy Through Electron Wind Force: an Innovative Approach

Study on the high cycle fatigue behavior of titanium microalloyed high strength beam steel by magnesium treatment

Elevating Fatigue Life in Nickel-Based Superalloys Through Suppression of Persistent Slip Bands/markings Via High-Density Pulsed Electric Current Treatment

Effect of Pulsed Magnetic Field on Microstructure and Mechanical Properties of 7050 Al Alloy After Two-Stage Aging

A Novel Electropulsing Treatment to Improve the Surface Strength and Repair the Pore of Additively Manufactured Ti-6Al-4V Alloy

Magnetic induced re-dissolution and microstructure modifications on mechanical properties of Cr4Mo4V steel subjected to pulsed magnetic treatment

Mechanism and Application of Mechanical Property Improvements in Engineering Materials by Pulsed Magnetic Treatment: A Review

Investigation of fatigue behavior of laser powder bed fusion Ti-6Al-4V: Roles of heat treatment and microstructure

Research Viewpoint on Performance Enhancement for Very-High-Cycle Fatigue of Ti-6Al-4V Alloys via Laser-Based Powder Bed Fusion

Effect of high magnetic field treatment on the microstructure and mechanical properties of Ti-48Al-2Cr-2Nb alloy prepared by powder-hot isostatic pressing

Effect of TiN/Ti coating combined with laser shock peening pre-treatment on the fatigue strength of Ti-6Al-4V titanium alloy

Microstructure and properties of TiAl-4822 alloy subject to the solid-state treatment with pulsed magnetic field

Fatigue performance of medical Ti6Al4V alloy after mechanical surface treatments

Effects of Ultrasonic Shot Peening on Fatigue Behavior of TA15 Titanium Alloy Fabricated by Laser Melting Deposition

Effect of Mg on Inclusion and High Cycle Fatigue Behavior in Titanium Microalloyed Beam Steel