Critical Conditions for Dynamic Recrystallization of S280 Ultra-High-Strength Stainless Steel Based on Work Hardening Rate

Mutong Liu,Ye Tian,Yu Wang,Kelu Wang,Kaiming Zhang,Shiqiang Lu

DOI: https://doi.org/10.3390/met12071123

IF: 2.695

2022-07-01

Metals

Abstract:Isothermal and constant-strain-rate compression experiments for S280 ultra-high-strength stainless steel were carried out under deformation temperatures of 1000–1150 °C and strain rates of 0.001–10 s−1 with a Thermecmaster-Z thermal simulator. The flow–stress behavior of the alloy was studied and the hot deformation activation energy was calculated. A critical strain model of the dynamic recrystallization (DRX) of the alloy was established using the work hardening rate for the first time. The results show that S280 ultra-high-strength stainless steel was positively sensitive to the strain rate and negatively sensitive to temperature, and its flow–stress curve showed characteristics of flow softening. The hot deformation activation energy corresponding to the peak strain was 519.064 kJ/mol. The DRX critical strain of the steel was determined from the minimum value of the −∂(lnθ)/∂ε − ε curve. The relationship between the DRX critical strain and peak strain could be characterized as εc=0.599εp and the relationship between the DRX critical stress and peak stress could be characterized as σc= 0.959σp The critical strain model of DRX could be expressed as εc=0.010Z0.062. The research results can provide theoretical support for avoiding the generation of actual thermal processing microstructure defects such as coarse grains and for obtaining products with excellent microstructure and properties.

materials science, multidisciplinary,metallurgy & metallurgical engineering