Monte Carlo optimization of a GRID collimator for preclinical megavoltage ultra-high dose rate spatially-fractionated radiation therapy

Nathan Clements,Magdalena Bazalova-Carter,Nolan Matthew Esplen
DOI: https://doi.org/10.1088/1361-6560/ac8c1a
IF: 3.5
2022-08-25
Physics in Medicine and Biology
Abstract:Purpose: In the present study, a 2-dimensional pre-clinical SFRT (GRID) collimator was designed for use on the ultrahigh dose-rate (UHDR) 10 MV ARIEL beamline at TRIUMF. TOPAS Monte Carlo simulations were used to determine optimal collimator geometry with respect to various dosimetric quantities. Materials and Methods: The GRID-averaged peak-to-valley dose ratio (PVDR) and mean dose rate of the peaks were investigated with the intent of maximizing both values in a given design. The effects of collimator thickness, focus position, septal width, and hole size on these metrics were found by testing a range of values for each parameter on a cylindrical GRID collimator. For each tested collimator geometry, photon beams with energies of 10 MV, 5 MV, and 1 MV were transported through the collimator and dose rates were calculated at various depths in a water phantom located 1.0 cm from the collimator exit. Results: It was determined that our optimized design would be one which achieves the maximum dose rate for a PVDR >5 at 10 MV. Ultimately, this was achieved using a collimator with a thickness of 75 mm, 0.8 mm septal and hole widths, and a focus position matched to the beam divergence. This optimized collimator maintained the PVDR of 5 in the phantom between water depths of 0-10 cm at 10 MV and had a mean peak dose rate of 3.06 ± 0.02 Gy/s at 0-1 cm depth. Conclusions: The relative impact of variable collimator geometric parameters has been studied and a design suited for use with a divergent UHDR source was found. We plan on 3D printing the optimized collimator to benchmark measurement results against these simulations.
engineering, biomedical,radiology, nuclear medicine & medical imaging
What problem does this paper attempt to address?