Abstract:Pervious concrete is a type of sustainable construction material used in pavement engineering due to its advantages in water permeability, skid resistance, and sound absorption performance. This study investigated the pore characteristics of five types of pervious concrete, along with the uniaxial compression behaviors and semi-circular bending (SCB) fracture performance. The critical stress intensity factor was obtained using the equivalent energy approach. Gray relational analysis was conducted between the mechanical performance and the pore characteristics. Pore indicators include the effective porosity, 2D porosity along the specimen height, 2D coordination number (CN) along the specimen height, 2D pore radius, 2D specific surface area, 3D CN, 3D pore radius, and 3D virtual porosity. Results indicated that from M1 to M3, when cement mortar content decreased from 520 kg/m(3) to 408 kg/m(3), the effective porosity increased from 18.95% to 27.43%, and the compressive strength and fracture toughness decreased obviously. For the same type of pervious concrete mixture, with the increase of notch length, the critical stress intensity factor decreased accordingly. The 2D porosity distribution, 2D pore size distribution, and 2D CN distribution presented a symmetrical trend of decreasing, then increasing, and then decreasing with the increase of specimen height. Aggregate with the gradation within the range of 9.5 mm to 19.0 mm generated a higher compressive strength, larger effective porosity and larger pore size compared to the gradation of 4.75 mm similar to 9.5 mm. The results of CN and pore radius generated from the 3D pore network model were larger than the corresponding 2D values. The gray correlation analysis revealed that 2D pore radius and 3D pore radius played critical effects on the uniaxial compressive strength and fracture resistance, while 2D CN and 3D CN were the least significant factors affecting the mechanical performance.

Effects of Parameters on Vertical Porosity Distribution in Pervious Concrete

Investigation of the Internal Structure of Hardened 3D-Printed Concrete by X-CT Scanning and Its Influence on the Mechanical Performance.

Investigation of Compaction on Compressive Strength and Porosity of Pervious Concrete

Characterization of porosities and optimization of mix design of pervious concrete using image analysis

Investigation and prediction of impact of aggregate size and shape on porosity and compressive strength of pervious concrete

Powder Gradation Effect on the Fresh, Mechanical, and Early-Age Shrinkage Properties of UHPC

Influence of Pore Structure Characteristics on the Mechanical and Durability Behavior of Pervious Concrete Material Based on Image Analysis

Measurement of Permeability and the Correlation Between Permeability and Strength of Pervious Concrete

Effect of Aggregate Size and Compaction on the Strength and Hydraulic Properties of Pervious Concrete

Microscopic Factors Affecting the Performance of Pervious Concrete

Contribution to predicting laboratory pervious concrete behavior through density control and coarse aggregate granulometry

Impact of Water Level Variation on Mechanical Properties of Porous Concrete

Gray Correlation Analysis Between Mechanical Performance and Pore Characteristics of Permeable Concrete

Evaluation of pore size distribution and permeability reduction behavior in pervious concrete

Research on the strength prediction for pervious concrete based on design porosity and water-to-cement ratio

A study on properties of pervious concrete with high-volume usage of supplementary cementitious materials as substitutes for cement

Effect of Recycled Aggregates on Previous Concrete Properties

Estimating the Effect of Vibration Mixing Process on Air Pore Size Distributions in Concrete Using Digital Image Analysis

A novel approach to assess internal pore structure and quantify tortuosity of clogged pervious concrete through image analysis techniques

Correlations among physical properties of pervious concrete with different aggregate sizes and mix proportions

Influence of nanoparticles in UHPC by intensive (vacuum) mixing studies