Abstract:A surface-modified D-type photonic crystal fiber (PCF) based on surface plasmon resonance (SPR) is reported for application as a polarization filter and refractive index sensor. The gold film is deposited on the surface of the designed fiber structure to stimulate the SPR effect. Through etching, the upper surface of the designed structure forms an angle of 170°. The etching angle changes the distance between the fiber core and the surface of gold film to enhance the local field SPR effect. The designed optical device is numerically simulated using the finite element method (FEM), the mode distribution is studied, and the coupling phenomenon is analyzed. At a wavelength of 1.31 μm, the y-polarization loss is 1307.90 dB/cm, while the loss of x-polarization is 1.13 dB/cm; at 1.55 μm, the y-polarization loss is 1755.19 dB/cm, while the x-polarization loss is only 1.24 dB/cm. In the case of the same structure parameters as the proposed polarization filter, of which communication window is 1.55 μm, the designed structure also serves as a refractive index sensor from 1.330 to 1.365. The average sensitivity of the refractive index sensor is up to 4857 nm/RIU, and the highest sensitivity is 7588 nm/RIU when the refractive index is 1.365. The results show that the reported SPR-based PCF simultaneously implements dual communication window polarization filtering and refractive index sensing. Hence, the designed device has promising applications with good filtering and sensing performance.

Experimental and theoretical study of polarization in commercially available photonic crystal fibers

Proposed Square Lattice Photonic Crystal Fiber for Extremely High Nonlinearity, Birefringence and Ultra-High Negative Dispersion Compensation

Research on the Wide-Angle and Broadband 2d Photonic Crystal Polarization Splitter

Rectangular Porous-Core Photonic-Crystal Fiber With Ultra-Low Flattened Dispersion and High Birefringence for Terahertz Transmission

Research on Novel Single-Mode Polarization Maintaining Photonic Crystal Fiber

Wavelength Tunable Single-Circular-Polarization Twisted PCF

Modified D-type surface plasmon resonance (SPR)-based photonic crystal fiber (PCF) for application as a polarization filter and refractive index sensor

Single-Polarization Single-Mode Photonic Crystal Fiber for Terahertz Applications

A Novel Photonic Crystal Fiber with High Birefringence

Experimental investigation of birefringence of solid core polarization maintaining photonic crystal fibers

FFT Algorithm-Assisted Polarimetric Twist Sensor

Twist-tuned suppression of higher-order modes in single-ring hollow-core photonic crystal fibers

Bending insensitive dispersion flattened modified equiangular spiral photonic crystal fiber (MES-PCF)

Dispersion and polarization properties of elliptical air-hole-containing photonic crystal fibers

High Birefringence and Negative Dispersion Based Modified Decagonal Photonic Crystal Fibers: A Numerical Study

Chiral photonic crystal fibers with single mode and single polarization

Design Optimization of Equiangular Spiral Photonic Crystal Fiber for Large Negative Flat Dispersion and High Birefringence

Birefringence Sensitivity to Temperature of Polarization Maintaining Photonic Crystal Fibers

Highly birefringent elliptical-hole photonic crystal fiber with squeezed hexagonal lattice.

A Twist Sensor Based on Polarization-Maintaining Fibers with Different Cladding Diameters