Abstract:Biowaste to 3D printed biocomposites. The enhancement of the mechanical and thermal characteristics of 3D printed polylactic acid (PLA) composites reinforced by coir fiber powder (CFP) has been investigated by varying the weight percentage (wt%) of the reinforcement and annealing process. CFP/PLA composite filaments with CFP compositions of 0.1, 0.3, and 0.5 wt% were fabricated. These filaments were used to print CFP/PLA test specimens. The specimens were annealed at 90°C for 120 min in a hot air oven followed by cooling at room temperature. Mechanical, morphological, crystalline, and thermal characterizations were conducted on these specimens. The tensile and flexural strength of neat PLA were observed as 49.7 and 82.4 MPa which decreased by 6.4% and 8.13% respectively for printed composite specimens with 0.5 wt% CFP as reinforcement material. On the other hand, the annealed CFP/PLA composite specimen, with 0.1 wt% CFP as a reinforcement material, demonstrated higher tensile and flexural strength. Specifically, it exhibited a maximum tensile strength of 56.4 MPa and a maximum flexural strength of 92.9 MPa, which are 13.5% and 12.7% higher, respectively, than neat PLA. These strengths are 15.5% and 16.7% higher, respectively, than those of the unannealed CFP/PLA composite specimen with the same wt% of CFP reinforcement. The annealing process increased the crystallinity of composites by enhancing the crystallinity index (63%) and crystalline size (6.7 nm). The high thermal stability of composites (with a glass transition temperature of 256°C) makes them suitable for applications in food and medical packaging. Highlights Enhancement of thermo‐mechanical characteristics of 3D printed bio‐composites. Annealing process improved mechanical features of 3D printed bio‐composites. Annealed composite with 0.1 wt% as reinforcement demonstrated better properties. SEM and XRD studies confirmed failure mechanisms and crystalline structure. Thermal and mechanical assets favor its utilization in food wrapping applications.

Effect of Low-Temperature Plasma Treatment on Starch-Based Biochar and Its Reinforcement for Three-Dimensional Printed Polypropylene Biocomposites

Conversion from Bamboo Waste Derived Biochar to Cleaner Composites: Synergistic Effects of Aramid Fiber and Silica

Effect of Low‐concentration Alkali Solution Pretreatment on the Properties of Bamboo Particles Reinforced Poly(lactic Acid) Composites

High Toughness Composite Films Produced from Zein and Bamboo Fibers Based on Incorporating Biochar: Effects of Alkali Treatment

Morphological and Thermal Properties of Polystyrene Composite Reinforced with Biochar from Plantain Stalk Fibre

Impact of pyrolysis heating methods on biochars with enhanced CO 2 /N 2 separation and their incorporation in 3D-printed composites

Biochar from Digestate Pyrolysis as a Filler for Biopolymer Blends: Effect of Blend Composition

Feasibility study on thermo‐mechanical performance of 3D printed and annealed coir fiber powder/polylactic acid eco‐friendly biocomposites

Biochar as Sustainable Filler of Recycled Polylactic Acid (PLA): A New Generation of Processable Biocomposites

Preparation and properties of heat-treated esterified wood flour/polylactic acid composites for FDM 3D printing

Biochar filler in MEX and VPP additive manufacturing: characterization and reinforcement effects in polylactic acid and standard grade resin matrices

Plasma-Enhanced Alginate Pre-Treatment of Short Flax Fibers for Improved Thermo-Mechanical Properties of PLA Composites

Plasma‐assisted surface engineering for value added in starch bioplastics: A study on enhanced surface properties and natural dye immobilization

(Bio)degradable Biochar Composites of PLA/P(3HB-co-4HB) Commercial Blend for Sustainable Future—Study on Degradation and Electrostatic Properties

The effect of low-temperature plasma pretreatment on the biodegradability of polyethylene films

Preparation and characterization of bio-based green renewable composites from poly(lactic acid) reinforced with corn stover

Creating Sustainable Composites from Pyrolyzed Burlap and Ocean-Recycled Plastics using FDM

Effect of cold plasma treatment and plasma‐activated water on physicochemical and structural properties of starch: A green and novel approach for environmental sustainability

Compatibility Enhancement of Poly (lactic Acid)/Crosslinked Starch Composite by Vacuum Heating Treatment

Fabrication of Phytic Acid/Urea Co-Modified Bamboo Biochar and Its Application as Green Flame Retardant for Polylactic Acid Resins

Influence of bio-coupling agent on interfacial interlocking compatibility and toughness of ultrafine bamboo charcoal/polylactic acid composite film