Abstract:Enhanced synergistic stain removal is realized by tailoring the comonomer fractions of a light- and thermo-dual responsive copolymer, which is immobilized on cotton fabrics by a cross-linker. The copolymer poly(acrylamide azobenzene-co-ethylene glycol methacrylate-co-triethylene glycol methyl ether methacrylate), denoted P(AAAB1-co-EGMA2-co-MEO3MA17), is prepared by the ATRP polymerization method. The present molar ratio for these monomers is 1:2:17. Because of the existence of the light-responsive AAAB unit, the transition temperature of its aqueous solution under UV radiation is shifted to 39 °C, which is 2 °C higher than that in ambient conditions. This increase is caused by the trans–cis isomerization from the azobenzene groups, indicating an increased hydrophilicity of P(AAAB1-co-EGMA2-co-MEO3MA17) under UV radiation. After being immobilized onto cotton fabrics by a cross-linker, they are also dual-responsive. The equilibrium swelling ratio (ESR) of the cotton fabrics is further increased after UV radiation. Compared to our former investigation, the reduction of the AAAB molar fraction from 0.1 to 0.05 causes an increase of the ESR value by 10%. Moreover, the stain removal efficiency of the cotton fabrics immobilized with P(AAAB1-co-EGMA2-co-MEO3MA17) by cross-linker is also significantly improved under UV radiation. The hydrophilicity of the copolymer mainly from the MEO3MA units is crucial to the cleaning capability. Additionally lowering the attachment between stain and the copolymer coating on the cotton fabrics by trans–cis isomerization in those AAAB units also favors the cleaning. Hence, the stain removal is strongly improved by optimizing the fraction of light- versus thermo-responsive components in the copolymer, which can profoundly reduce the consumption of chemical detergents and energy during laundry.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.1c03290?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.1c03290</a>.Details about the used materials, measurements for copolymer characterization, preparation of the cotton fabrics immobilized with P(AAAB1-co-EGMA2-co-MEO3MA17) and P(AAAB1-co-EGMA1-co-MEO3MA11) as well as the cleaning performance measurements, 1H NMR spectra of P(AAAB1-co-EGMA2-co-MEO3MA17) and P(AAAB1-co-EGMA1-co-MEO3MA11) in CDCl3, GPC data of P(AAAB1-co-EGMA2-co-MEO3MA17) and P(AAAB1-co-EGMA1-co-MEO3MA11), DSC pattern of P(AAAB1-co-EGMA2-co-MEO3MA17), equilibrium swelling ratio measurements, the softness and stiffness of the blank cotton fabrics as well as cotton fabrics immobilized with P(AAAB1-co-EGMA2-co-MEO3MA17) by cross-linker, the weight loss ratio of the cotton fabrics immobilized with P(AAAB1-co-EGMA2-co-MEO3MA17) by cross-linker after washing for different times, CM images and fluorescence intensities of the fibers from the cotton fabrics immobilized with P(AAAB1-co-EGMA2-co-MEO3MA17) by cross-linker rinsing by distilled H2O below TTUV for 10 times after washing by Tide aqueous solution, and CM images and fluorescence intensities of the fibers from the cotton fabrics immobilized with P(AAAB1-co-EGMA2-co-MEO3MA17) by cross-linker rinsing by distilled water in various scenarios (<a class="ext-link" href="/doi/suppl/10.1021/acsami.1c03290/suppl_file/am1c03290_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Application of CMC from Oil Palm Biomass as Anti-Redeposition Agent in Laundry Detergent

Enhanced Carboxymethyl Cellulose Based on Empty Fruit Bunches in a High Degree of Substitution and Thermal Stability as a Biocomposite Film Backbone

Synthesis and characterization of CMC from water hyacinth for lithium-ion battery applications

Application of rhamnolipid as laundry detergent

Tailoring adsorbent cellulose beads of microcrystalline cellulose derived from oil palm empty fruit bunch

Carboxymethyl Cellulose Hydrogel from Biomass Waste of Oil Palm Empty Fruit Bunch Using Calcium Chloride as Crosslinking Agent

Chemical and Enzymatic Fiber Modification to Enhance the Mechanical Properties of CMC Composite Films

Synthesis and Characterization of Lignin-Incorporated Carboxymethyl Cellulose (CMC) Films from Oil Palm Lignocellulosic Waste

Preparation of citric acid-modified cellulose materials with superwetting and antibacterial characteristics for highly-efficient separation of oil/water mixtures, emulsions, and dye-containing wastewater

Preparation and Application of Cationic Modified Cellulose Fibrils as a Papermaking Additive

Synthesis and characterization of seaweed cellulose derived carboxymethyl cellulose

Creating bulky papers with hydroxypropyl methylcellulose

Ultrasonic-assisted synthesis for the production of green and sustainable hemp carboxymethyl cellulose

Facile fabrication of a low-cost carboxymethyl cellulose–polyacrylamide composite for the highly efficient removal of cationic dye: optimization, kinetic and reusability

Development of Luminescent and Photosensitive Cellulose Microfibers From Palm Sprout Fibers: Antibacterial Efficacy and Dye Adsorption Potential

Sustainable Production of Carboxymethyl Cellulose: A Biopolymer Alternative from Sugarcane (Saccharum officinarum L.) Leaves

Simultaneous degumming and deacidification of crude palm oil using mixed matrix PVDF membrane

Preparation of palm (Elaeis oleifera) pressed fibre cellulose nanocrystals via cation exchange resin: characterisation and evaluation as Pickering emulsifier

Synergistic Stain Removal Achieved by Controlling the Fractions of Light and Thermo Responsive Components in the Dual-Responsive Copolymer Immobilized on Cotton Fabrics by Cross-Linker

Fabrication and Characterization of Functional Biobased Membranes from Postconsumer Cotton Fabrics and Palm Waste for the Removal of Dyes

Isolation, Modification, and Characterization of Local Indonesia's Sugarcane Bagasse Cellulose for Dye‐Adsorbent Application