Abstract:Mixed oxides of uranium and plutonium U 1-y Pu y O 2-x are currently studied as reference fuel for Sodium-cooled Fast Reactors (SFRs). To predict the margin to fuel melting, an accurate description of both solidus and liquidus temperatures of these materials is crucial. In this work, after a critical review of the literature data, the parameters of the liquid phase of the CALPHAD models of the Pu–O and U–Pu–O systems are reassessed based on the model of Guéneau et al.. A good agreement between the calculated and selected experimental data is obtained. Using this model, the melting behaviour of U 1-y Pu y O 2±x oxides is then studied as a function of plutonium content and oxygen stoichiometry. The congruent melting for the mixed oxides is found to be shifted towards low O/M ratios compared to the end-members (UO 1.97 and PuO 1.95 ). The temperature of this congruent melting is nearly constant (3130–3140 K) along a ternary phase boundary from UO 1.98 to U 0.55 Pu 0.45 O 1.82 and then decreases with Pu content to a maximum of approximately 3040 K for PuO 1.95. This observation is explained by the stabilisation of the hypo-stoichiometric mixed oxides due to the increase of the configurational entropy at high temperatures by the formation of oxygen vacancies and related cation mixing. The influence of the atmosphere used in the laser heating melting experiments on the oxygen stoichiometry of the sample and its solidus and liquidus temperatures is investigated. The determination of this O/M ratio after laser melting tests using XANES is also reported. The simultaneous presence of U 6+ , U 5+ , U 4+ , Pu 3+ and Pu 4+ is observed, highlighting the occurrence of charge compensation mechanisms. The samples are highly oxidised in air whereas close to stoichiometry (O/M = 2.00) in argon. These results are in agreement with the computed solidification paths. This work illustrates the complex melting behaviour of the U 1-y Pu y O 2±x fuels and highlights the need for the CALPHAD method to accurately describe and predict the high-temperature transitions of the U–Pu–O system.

Synthesis and multi-scale properties of PuO2 nanoparticles: recent advances and open questions

The missing pieces of the PuO 2 nanoparticle puzzle

Insight into the structure-property relation of UO2 nanoparticles

Synthesis, Structural, and Electronic Properties of K 4 Pu VI O 2(CO 3) 3(cr): An Environmentally Relevant Plutonium Carbonate Complex

Synthesis of Nanocrystalline PuO2 by Hydrothermal and Thermal Decomposition of Pu(IV) Oxalate: A Comparative Study

Chronicles of plutonium peroxides: spectroscopic characterization of a new peroxo compound of Pu(IV)

Plutonium oxide melt structure and covalency

Stabilization of plutonium nano-colloids by epitaxial distortion on mineral surfaces

CuO nanostructures: Synthesis, characterization, growth mechanisms, fundamental properties, and applications

Energetics and Electronic Structure of Plutonium

Stabilization of Plutonium(V) Within a Crown Ether Inclusion Complex

The Propensity of Uranium-Peroxide Systems to Preserve Nanosized Assemblies

Formation of Fully Stoichiometric, Oxidation-State Pure Neptunium and Plutonium Dioxides from Molecular Precursors

Polyepitaxial grain matching to study the oxidation of uranium dioxide

Phonon dispersion curves and thermodynamic properties of α-Pu2O3

Investigation of the solid/liquid phase transitions in the U–Pu–O system

Nanoscale Oxygen Defect Gradients in the Actinide Oxides

First-principles study of phase stability, electronic and mechanical properties of plutonium sub-oxides

Systematic analysis of structural and topological properties: new insights into PuO2(H2O)n2+ (n = 1–6) complexes in the gas phase

Research Progress of Hyperstoichiometric UO2Crystals

ZnO nanostructures: growth, properties and applications