Abstract:This study is focused on a proposal of a smartphone imaging-based quantification for providing a simple and rapid method for the analysis of chemical oxygen demand (COD) and color throughout the use of the HSV and/or RGB model in digital devices. For COD, calibration curves were done based on the theoretical values of potassium biphthalate for a proper comparison between the spectrophotometer and the smartphone techniques. The smartphone camera and application attain an average accuracy higher than the analysis in the spectrophotometer (98.3 and 96.2%, respectively). In the color analysis, it was demonstrated that only the UV–vis bands measurement is not feasible to perform the real abatement of the dye in the water because the limiting concentration that allows obtaining a linear relationship in this equipment related to the dye concentration is about 10 mg L −1 . Above this value, the spectrophotometer can not reach the real difference of color in the solution. Meanwhile, the smartphone method by using the camera reaches linearity until 50 mg L −1 . From an environmental point of view, smartphones have been used for monitoring several organic and inorganic pollutants, however, no attempts have been published related to their use to evaluate the color and COD during wastewater treatment. Therefore, this investigation also aims to assess the utilization of these methods, for the first time, when high-colored water polluted by methylene blue (MB) was electrochemically treated by using a boron-dopped diamond (BDD) as the anode, with different current densities ( j = 30, 45, 60, and 90 mA cm −2 ). COD and color abatement results clearly showed that different organic matter/color removal efficiencies were achieved, depending on the j used. All the results are aligned with the studies already available in the literature, with the total removal of color in 120 min of electrolysis with 60 and 90 mA cm −2 , and almost 80% of COD abatement with the higher j . Moreover, samples of real effluent from beauty salons were compared, with standard deviation varying from only 3 to 40 mg O 2 L −1 , which is acceptable for COD values close to 2000. Finally, the methods here presented can be a great benefit for public water monitoring policies, since it is cheap and has a decentralized characteristic, given that smartphones are very common and portable devices.

Sorption-Fluorimetric Determination of Quinolones in Waste and Natural Waters with a Smartphone

Portable Smartphone-Based QDs for the Visual Onsite Monitoring of Fluoroquinolone Antibiotics in Actual Food and Environmental Samples

Smartphone-based / Fluoro-SPE for Selective Detection of PFAS at Ppb Level

Smartphone app-based/portable sensor for the detection of fluoro-surfactant PFOA

Smartphone App-Based/portable Sensor for the Detection of Fluoro-Surfactant PFOA.

Eco-friendly screening method for sulfonamides using a 3D handheld smartphone-based fluorescence detection device and graphene nanoplatelet-packed pipette tip microextraction

A ratiometric fluorescent dark box and smartphone integrated portable sensing platform based on hydrogen bonding induction for on-site determination of enrofloxacin

Determination of Quinolone Antibiotics in Water Using Solid Phase Extraction-High Performance Liquid Chromatography-Fluorescence Method

Smartphone-based colorimetric method for decentralized wastewater treatment monitoring by inexperienced users

A ratiometric fluorescence platform based on carbon dots for visual and rapid detection of copper(II) and fluoroquinolones

A fluorescent nanocomposite probe of quantum dots and zinc oxide embedded in polymer for smartphone-assisted on-site determination of diflunisal

Quantum confined peptide assemblies in a visual photoluminescent hydrogel platform and smartphone-assisted sample-to-answer analyzer for detecting trace pyrethroids

On-site quantitation of xanthine in fish and serum using a smartphone-based spectrophotometer integrated with a dual-readout nanosensing assay

Green Approach for Simultaneous Quantitative Analysis of Fluoroquinolones in the Environment using Three-Dimensional Fluorescence Coupled with Second-Order Calibration Method

Synthesis of water-soluble CuInS2@ZnS quantum dots using amino acids as ligands and their application in smartphone-based visual detection of ciprofloxacin

A smartphone-based fluorospectrophotometer and ratiometric fluorescence nanoprobe for on-site quantitation of pesticide residue

Decentralized environmental applications of a smartphone-based method for chemical oxygen demand and color analysis

Smartphone-assisted fluorescent sensor for the visualization and quantitative detection of doxycycline and L-arginine

A smartphone sensing fluorescent detection of mercury ion based on silicon quantum dots in environment water

Rare-earth ions coordination enhanced ratiometric fluorescent sensing platform for quantitative visual analysis of antibiotic residues in real samples

Determination and Ecological Risk Assessment of Quinolone Antibiotics in Drinking and Environmental Waters Using Fully Automated Disk-Based SPE Coupled with UPLC–MS/MS