Inverse agonism at serotonin and cannabinoid receptors.

V. Aloyo,K. Berg,W. Clarke,U. Spampinato,J. Harvey

DOI: https://doi.org/10.1016/S1877-1173(10)91001-6

Progress in Molecular Biology and Translational Science

Abstract:

What problem does this paper attempt to address?

Portable Smartphone-based Colorimetric Analyzer with Enhanced Gold Nanoparticles for On-site Tests of Seafood Safety

Zhong Longjie,Sun Jiadi,Gan Ying,Zhou Shuqi,Wan Zijian,Zou Quchao,Su Kaiqi,Wang Ping

DOI: https://doi.org/10.2116/analsci.18p184

IF: 1.967

2019-01-01

Analytical Sciences

Abstract:Saxitoxin (STX) is one of the paralytic shellfish poisons (PSP) that endanger people’s health. It is necessary to develop methods for the on-site rapid detection for STX in order to prevent safety accidents. An enzyme-linked immunosorbent assay (ELISA) is timesaving and effective, but it is not suitable for large-scale in-field tests due to the expensiveness of commercial ELISA kits and the bulkiness of a microtiter plate reader (MTPR). In this study, a portable smartphone-based colorimetric analyzer (SBCA) with a cost-effictive enhanced gold nanoparticle-based ELISA (EGNB-ELISA) was proposed for STX detection. In a bicinchoninic acid (BCA) protein assay (R2 = 0.9939) and a glucose assay (R2 = 0.9937), SBCA was shown to be in good agreement with MTPR. EGNB-ELISA had a 12.5-fold lower detection limit (0.4 ng/mL) and a lower detection range (1 - 50 ng/mL, Y = 0.4037X + 0.3564, R2 = 0.9797) than the classical ELISA. The recovery rate ranged over 89.1 - 112.2%. The whole detection system, combining both homemade SBCA and ENGB-ELISA, is expected to satisfy the needs of on-site STX sample tests to guarantee seafood safety.
Smartphone app-based/portable sensor for the detection of fluoro-surfactant PFOA

Cheng Fang,Xian Zhang,Zhaomin Dong,Liang Wang,Mallavarapu Megharaj,Ravi Naidu

DOI: https://doi.org/10.1016/j.chemosphere.2017.10.057

IF: 8.8

2018-01-01

Chemosphere

Abstract:We developed a smartphone app-based monitoring tool for the detection of anionic surfactants (AS), including perfluorooctanoic acid (PFOA) and perfluorooctane sulfonate (PFOS). Akin to the methylene blue active substances (MBAS), liquid-phase extraction (LPE) is employed to extract the hydrophobic ion-pair of dye (ethyl violet)-AS to an organic phase (ethyl acetate). The colour (RGB) of the organic phase is read using a smartphone camera with the help of a reading kit. The value of RGB is carefully corrected and linked to the concentration of ASs with a standard deviation of <10% in the 10–1000 ppb (part per billion) range. In order to avoid the interference arising from inorganic anions (such as those found in tap water and groundwater), the water sample is pre-treated either by solid-phase extraction (SPE), which takes ∼30 min, or by dual liquid-phase extraction (dual-LPE, developed by us), which takes ∼5 min. In the latter case, the organic phase of the first LPE (equilibrium with water sample) is transferred and subjected to a second LPE (equilibrium with Milli-Q water) to remove any potential background interference. In the meantime, SPE can also pre-concentrate ASs at 100–1000 times (in volume) to benefit the sensitivity. Consequently, our smartphone app can detect PFOA spiked in tap/groundwater with an LOD of 10 ppb (∼12 nM, dual-LPE of ∼5 min), or 0.5 ppb (∼1.2 nM, SPE of ∼3 h), suggesting that it has the potential to succeed as a pre-screening tool for on-site application and in common laboratory tests.
Smartphone App-Based/portable Sensor for the Detection of Fluoro-Surfactant PFOA.

Cheng Fang,Xian Zhang,Zhaomin Dong,Liang Wang,Mallavarapu Megharaj,Ravi Naidu

DOI: https://doi.org/10.1016/j.chemosphere.2017.10.057

IF: 8.8

2017-01-01

Chemosphere

Abstract:We developed a smartphone app-based monitoring tool for the detection of anionic surfactants (AS), including perfluorooctanoic acid (PFOA) and perfluorooctane sulfonate (PFOS). Akin to the methylene blue active substances (MBAS), liquid-phase extraction (LPE) is employed to extract the hydrophobic ion pair of dye (ethyl violet)-AS to an organic phase (ethyl acetate). The colour (RGB) of the organic phase is read using a smartphone camera with the help of a reading kit. The value of RGB is carefully corrected and linked to the concentration of ASs with a standard deviation of <10% in the 10-1000 ppb (part per billion) range. In order to avoid the interference arising from inorganic anions (such as those found in tap water and groundwater), the water sample is pre-treated either by solid-phase extraction (SPE), which takes-30 min, or by dual liquid-phase extraction (dual-LPE, developed by us), which takes similar to 5 min. In the latter case, the organic phase of the first LPE (equilibrium with water sample) is transferred and subjected to a second LPE (equilibrium with Milli-Q water) to remove any potential background interference. In the meantime, SPE can also pre-concentrate ASs at 100-1000 times (in volume) to benefit the sensitivity. Consequently, our smartphone app can detect PFOA spiked in tap/groundwater with an LOD of 10 ppb (similar to 12 nM, dual-LPE of similar to 5 min), or 0.5 ppb (similar to 1.2 nM, SPE of similar to 3 h), suggesting that it has the potential to succeed as a pre-screening tool for on-site application and in common laboratory tests. (C) 2017 Elsevier Ltd. All rights reserved.
A smartphone-based fluorospectrophotometer and ratiometric fluorescence nanoprobe for on-site quantitation of pesticide residue

Meng Xiao,Ningxia Xu,Aitong He,Zipei Yu,Bo Chen,Baohui Jin,Lelun Jiang,Changqing Yi

DOI: https://doi.org/10.1016/j.isci.2023.106553

IF: 5.8

2023-04-01

iScience

Abstract:Cost-effective and user-friendly quantitation at points-of-need plays an important role in food safety inspection, environmental monitoring, and biomedical analysis. This study reports a stand-alone smartphone-based fluorospectrophotometer (the SBS) installed with a custom-designed application (the SBS-App) for on-site quantitation of pesticide using a ratiometric sensing scheme. The SBS can collect fluorescence emission spectra in the wavelength range of 380-760 nm within 5 s. A ratiometric fluorescence probe is facilely prepared by directly mixing the blue-emissive carbon nanodots (the Fe3+-specific fluorometric indicator) and red-emissive quantum dots (the internal standard) at a ratio of 11.6 (w/w). Based on the acetylcholinesterase/choline oxidase dual enzyme-mediated cascade catalytic reactions of Fe2+/Fe3+ transformation, a ratiometric fluorescence sensing scheme is developed. The practicability of the SBS is validated by on-site quantitation of chlorpyrifos in apple and cabbage with a comparable accuracy to the GC-MS method, offering a scalable solution to establish a cost-effective surveillance system for pesticide pollution.

multidisciplinary sciences
Portable Smartphone-Based QDs for the Visual Onsite Monitoring of Fluoroquinolone Antibiotics in Actual Food and Environmental Samples

Yingwang Ye,Tingting Wu,Xiuting Jiang,Jinxuan Cao,Xiao Ling,Qingsong Mei,Hua Chen,Deman Han,Jing-Juan Xu,Yizhong Shen

DOI: https://doi.org/10.1021/acsami.9b23167

IF: 9.5

2020-01-01

ACS Applied Materials & Interfaces

Abstract:Accurate onsite profiling of fluoroquinolone antibiotics (FQs) is of vital significance for ensuring food safety and estimating environmental pollution. Here, we propose a smartphone-based QD ratiometric fluorescence-sensing system to precisely report the level of FQs. As a proof of concept, we chose gatifloxacin (GFLX, a typical member of FQs) as the model for the analytical target, which could effectively trigger the fluorescence color variation of QDs from bright yellow-green (∼557 nm) to blue (∼448 nm) through the photoinduced electron-transfer (PET) process, thus yielding an evident ratiometric response. Based on this, the level of GFLX can be reported within a wide linear range from 0.85 nM to 3.6 μM. Moreover, this assay owns a high sensitivity with a low detection limit of 0.26 nM for GFLX and a quick sample-to-answer monitoring time of 5.0 min, manifesting that this platform could be fully qualified for onsite requirements. Interestingly, this portable device has successfully been applied for the onsite detection of GFLX in real food (i.e., milk and drinking water) and environmental (i.e., fish-farming water) samples with acceptable results. This developed platform offers a great promise for the point-of-care detection of FQ residues in practical application with the merits of being label-free, low-cost, and rapid, thus opening a new pathway for the onsite evaluation of food safety and environmental health.
A smartphone-assisted portable sensing hydrogel modules based on UCNPs and Co3O4 NPs for fluorescence quantitation of hypoxanthine in aquatic products

Yunrui Cao,Yu Song,Xiaowei Fan,Lei Ma,Tingyu Feng,Junpeng Zeng,Changhu Xue,Jie Xu

DOI: https://doi.org/10.1016/j.talanta.2024.126259

IF: 6.1

2024-08-15

Talanta

Abstract:Hypoxanthine is a promising index for evaluating the freshness of various aquatic products. Combined the hydrogels containing upconversion nanoparticles (UCNPs), Co3O4 NPs, and N-ethyl-N-(3-sulfopropyl)-3-methylaniline sodium salt/4-amino-antipyrine (TOPS/4-AAP) with a smartphone, a portable sensor was developed for the convenient, sensitive detection of hypoxanthine. With the H2O2 from xanthine oxidase (XOD)-catalyzed reactions of hypoxanthine, the fluorescence of UCNPs was effectively quenched by the purple product produced from the oxidization of TOPS/4-AAP catalyzed by Co3O4 NPs exhibiting peroxidase activity, among which the color change could be transformed into digital signals for quantification of hypoxanthine. The Green value in the RGB analysis of the fluorescence image was negatively proportional to hypoxanthine concentration in the range of 2.5-20 mg/L with a detection limit of 0.69 mg/L and a quantitation limit of 2.30 mg/L. Finally, this sensor was applied for hypoxanthine detection in real aquatic products, showing potential application for freshness evaluation of aquatic products.
A 3D printed smartphone optosensing platform for point-of-need food safety inspection

Zhonggang Liu,Yali Zhang,Shujia Xu,Heng Zhang,Yixun Tan,Chenming Ma,Rong Song,Lelun Jiang,Changqing Yi

DOI: https://doi.org/10.1016/j.aca.2017.02.022

2017-05-08

Abstract:The deficiency in rapid and in-field detection methods and portable devices that are reliable, easy-to-use, and low cost, results in the difficulties to uphold the high safety standards in China. In this study, we introduce a rapid and cost-effective smartphone-based method for point-of-need food safety inspection, which employs aptamer-conjugated AuNPs as the colorimetric indicator, and a battery-powered optosensing accessory attached to the camera of a smartphone for transmission images capture. A user-friendly and easy-to-use Android application is developed for automatic digital image processing and result reporting. Streptomycin (STR) is selected as the proof-of-concept target, and its specific quantitation can be realized with a LOD of 12.3 nM (8.97 μg kg-1) using the reported smartphone-based method. The quantitation of STR in honey, milk and tap water confirm the reliability and applicability of the reported method. The extremely high acceptance of smartphone in remote and metropolitan areas of China and ease-of-use of the reported method facilitate active food contaminant and toxicant screening, thus making the implementation of the whole food supply chain monitoring and surveillance possible and hence significantly improving the current Chinese food safety control system.
Ratiometric fluorescent sensing system for drug residue analysis: Highly sensitive immunosensor using dual-emission quantum dots hybrid and compact smartphone based-device

Wenbo Yu,Chengxin Jiang,Bing Xie,Siyuan Wang,Xuezhi Yu,Kai Wen,Jianhan Lin,Jing Wang,Zhanhui Wang,Jianzhong Shen

DOI: https://doi.org/10.1016/j.aca.2019.12.037

2020-03-15

Abstract:Immunoassays such as the enzyme-linked immunosorbent assay (ELISA) are utilized extensively for detecting protein biomarkers and small molecules in healthcare, environmental monitoring, and food analysis. Unfortunately, the current strategies for immunoassays often require sophisticated apparatus such as a microplate reader, which might not be available in resource-limited areas. To mitigate this problem, we designed a compact smartphone based-device and a multicolor response immunosensor. First, we designed a compact and cost-effective 3D-printed attachment, where a light-emitting diode was used as a light excitation source and a smartphone captured the fluorescent emission signals. Second, by combining quantum dots hybrid and chemical redox reaction, multiple color responses were displayed in the presence of the analyte at different concentrations. Third, solutions with distinct tonality could be readily distinguished by the naked eye and they were suitable for quantitative analysis using the hue-saturation-lightness color space based on a smartphone application. The versatility of the proposed sensing system was demonstrated by implementing an indirect competitive ELISA for analyzing trace drug residues in foodstuffs. The multicolor response of this sensing strategy allows us to visually quantify drug residues in foodstuffs. Moreover, the smartphone-based immunosensor can assess the exact concentration of the analyte by using a self-designed mobile application. The proposed assay provides a highly sensitive performance that the limit of detection was 0.37 ng/mL by visual detection and 0.057 ng/mL using the compact device. Due to its advantages in terms of portability, straightforward visual detection, high sensitivity, and cost effectiveness, the proposed immunosensor has great potential for applications in areas without access to laboratories or expensive infrastructure.
Ratiometric fluorescent signals-driven smartphone-based portable sensors for onsite visual detection of food contaminants

Yizhong Shen,Yunlong Wei,Chunlei Zhu,Jinxuan Cao,De-Man Han

DOI: https://doi.org/10.1016/j.ccr.2022.214442

IF: 24.833

2022-05-01

Coordination Chemistry Reviews

Abstract:Development of efficient and portable biosensor to achieve the accurate onsite detection of food contaminants is of very great significance for safeguarding food safety and human health. With the popularity of smartphone, the digital imaging feature makes it to be an outstanding analytical platform to develop the point-of-care testing sensors. Compared with single-emission fluorescent assay, the ratiometric fluorescent assay possesses the built-in self-calibration function to avoid the interferences caused by various target-independent factors, circumventing/reducing false positive result output, thus improving the detection accuracy and expanding the dynamic detection range in complicated food matrixes. Based on these, vast efforts focus on integrating smartphone with ratiometric fluorescent strategies to develop portable sensors for realizing the onsite visual detection of food contaminants in a rapid, low cost, reliable, and even easy to implement in resource-limited areas way. In this review, we summarize the recent development of ratiometric fluorescent signals-driven smartphone-based sensors for onsite visual detection of food contaminants (e.g., antibiotics, pesticides, & harmful ions), discuss the confronting challenges, and propose an outlook on the future of this advanced analytical technology to help better achieve the precisely onsite detection of food contaminants, ensuring food safety and human health.

chemistry, inorganic & nuclear
A dual-functional smartphone-based sensor for colorimetric and chemiluminescent detection: A case study for fluoride concentration mapping

Yunpeng Xing,Qian Zhu,Xiaohong Zhou,Peishi Qi

DOI: https://doi.org/10.1016/j.snb.2020.128254

2020-09-01

Abstract:Reliable field techniques for sensing and mapping environmental contamination has the potential to revolutionize environmental monitoring, among which smartphone-based sensors (SPSs) are playing an increasing role owing to the low cost and the widespread ownership of smartphone. How to integrate more functions on SPSs has been a hot field of research. In this study, a dual-functional SPS for colorimetric and chemiluminescence detection were developed through simple and efficient light path design within an integrated 3D-printed attachment, and the smartphone application design makes it possible for simpler analysis, storage and transmission of data. In colorimetric detection, due to the use of white LED and diffraction grating, this sensor could determinate samples in various color, and five contaminants, including fluoride, ammonia nitrogen, orthophosphate, turbidity, and chlorine, were detected with good reliability. The chemiluminescence determination of H2O2 indicated broader potential application fields. As a successful case study, this SPS was used to map the fluoride concentration of surface water in Suzhou (China) with good sensitivity (0.06 mg/L limit of detection, 0.1∼2 mg/L linear range). In summary, the dual-functional and on-site sensing capabilities of this SPS show prospects in the field of environmental monitoring, even in medical diagnosis, food safety and so on.
A smartphone-supported portable micro-spectroscopy/imaging system to characterize morphology and spectra of samples at the microscale.

Gang Chen,Hui Hui Chai,Jing Jing Fu,Ling Yu,Can Fang

DOI: https://doi.org/10.1039/d0ay00945h

IF: 3.1

2020-01-01

Analytical Methods

Abstract:A smartphone-based analysis system is favored for point-of-care testing applications. The present work proposes a novel micro-spectroscopy/imaging system comprising a portable spectrometer as an optical sensor and a compact homemade microscope to acquire the image and spectra of micron-scale regions. Protein concentration quantification based on the bicinchoninic acid method was demonstrated with the proposed micro-spectroscopy/imaging system to analyse the spectrometer signals. Morphologies of onion endothelial and human breast cancer cells, used as biological sample models, were characterized to demonstrate the microscopic imaging capacity of the device. The ability to simultaneously obtain morphological and spectral information using the proposed portable device was demonstrated by examining the 10 mu m sub-pixels of a smartphone screen. These results highlight the potential for adopting a smartphone-based micro-spectroscopy/imaging system for point-of-care testing.
["Screening for abdominal aortic aneurysm in 65-year old men lacks scientific evidence].

B. Hovelius,J. Brodersen

Abstract:
Softening of fused‐silica capillaries during particle packing

Jingqing Chen,M. Dulay,R. Zare

DOI: https://doi.org/10.1002/(SICI)1522-2683(20000401)21:7<1430::AID-ELPS1430>3.0.CO;2-B

2000-04-01

Electrophoresis

Abstract:When a semipreparative capillary electrochromatography (CEC) capillary is packed with silica particles and exposed to solvent, its mechanical strength is markedly reduced. In our studies, a fused‐silica capillary (internal diameter > 200 μm and wall thickness < 150 μm) was packed under pressure (approximately 200 psi) with spherical silica particles (1.5—5 μm) suspended in water or various common organic solvents. After one hour of exposure, the capillary can be readily deformed, and it keeps its deformed shape upon release of the force causing deformation. It is suggested that capillary softening is promoted through the propagation of internal microcracks that have been caused by action of the particles during packing in the presence of solvent. Application of a protective coating to the inside of the capillary is found to reduce or eliminate capillary softening.
A New Caffeine Detection Method Using a Highly Multiplexed Smartphone-Based Spectrometer

Erhuan Zhuo,Huanxin Xia,Huan Hu,Yu Lin

DOI: https://doi.org/10.3390/bios14120590

2024-12-04

Biosensors

Abstract:Smartphones equipped with highly integrated sensors are increasingly being recognized as powerful tools for rapid on-site testing. Here, we propose a low-cost, portable, and highly multiplexed smartphone-based spectrometer capable of collecting three types of spectra—transmission, reflection, and fluorescence—by simply replacing the optical fiber attached to the housing. Spectral analysis is performed directly on the smartphone using a custom-developed app. Furthermore, we introduce a high signal-to-noise ratio (SNR) caffeine detection scheme that leverages aspirin and salicylic acid as fluorescent probes, allowing for the rapid and straightforward detection of caffeine in various samples. The fluorescence quenching of the probes was found to be linearly related to the caffeine concentration (0–200 μM), and the recoveries of the commercially available caffeine-containing samples were in the range of 98.0333–105.6000%, with a limit of detection (LOD) of 2.58 μM. The reliability and stability of the on-site assay using the smartphone spectrometer were verified. More importantly, this spectrometer demonstrates great potential as a versatile device for use outside of laboratory settings by enabling different operating modes tailored to various scenarios.

chemistry, analytical,nanoscience & nanotechnology,instruments & instrumentation
Rapid and sensitive point-of-need aflatoxin B1 testing in feedstuffs using a smartphone-powered mobile microfluidic lab-on-fiber device

Yuxin Zhuo,Wenjuan Xu,Yuan Chen,Feng Long

DOI: https://doi.org/10.1016/j.jhazmat.2023.132406

IF: 13.6

2023-08-26

Journal of Hazardous Materials

Abstract:Rapid, high-frequency, and accurate identification of aflatoxin B1 (AFB1) is crucial for ensuring food safety and reducing population mortality. Herein, we constructed S martphone powered M obile m I crofluidic L ab-on-fiber d E vice ( SMILE ) comprising a compact optical system, fiber nano-bioprobe-embedded microfluidic-chip system, mini-photodetector, and software application to facilitate the rapid and sensitive point-of-need quantitative testing for AFB1. The elegant optical design of SMILE significantly improves light transmission efficiency, detection sensitivity, and portability by integrating a compacted all-fiber optical structure with a fiber nano-bioprobe-embedded microfluidic chip. Furthermore, the nanopore layer of the fiber nano-bioprobe improves detection sensitivity by increasing the biorecognition molecule number and enhancing the interaction between the evanescent field and dye. Through an indirect competitive immunoassay mechanism, SMILE achieves sensitive quantitative detection of AFB1 with a detection limit of 0.08 μg/L. Herein, SMILE was validated using several feedstuff samples tested with a simple aqueous extraction protocol, demonstrating good correlation with high-performance liquid chromatography for AFB1-contaminated feedstuffs. The immunoassay process is completed within 12 min, boasting high sensitivity, specificity, reusability, and reproducibility. Owing to its sensitivity, portability, flexibility, plug-and-play, and smartphone integration, SMILE is highly scalable for rapid and high-frequency point-of-need testing for AFB1 and other trace contaminants.

environmental sciences,engineering, environmental
A Novel Colorimetric and Fluorescent Dual-Mode 3D Paper-Based Microfluidic Aptasensor for the Point-of-care Detection of Sulfadimethoxine

Xinyu Tong,Xianfeng Lin,Nuo Duan,Ziyu Lv,Zhouping Wang,Shijia Wu

DOI: https://doi.org/10.1016/j.snb.2023.134691

IF: 9.221

2023-01-01

Sensors and Actuators B Chemical

Abstract:Sulfadimethoxine antibiotics (SDM) are commonly used in aquatic foods to inhibit bacteria, but their residues in aquatic food pose certain risks to public health. Herein, we developed a systematic portable biosensing platform for SDM, which comprised a dual-mode three-dimensional paper-based microfluidic chip (3D-mu PAD), a dual-light portable device, and a smartphone application for obtaining results. The detection principle of the dual-mode 3D mu PAD was based on the aggregation of Ag NPs without the protection of aptamers and the inner filter effect (IFE) between Mg, N-CDs and Ag NPs. With the addition of SDM, the significant change of two signals can be sensitively recognized in the portable device and calculated by a self-developed mini program in the smartphone to obtain the detection results. Under optimal conditions, SDM was sensitively detected in the range of 10-1000 ng/ mL with an estimated limit of detection (LOD) of 0.13 ng/mL and 0.21 ng/mL in fluorescence and colorimetric modes, respectively. Moreover, this platform was successfully applied to determine SDM in fish with recoveries of 96.7%- 113.6% and 98.2%- 105.1%, respectively. This method has the advantages of low detection cost, low reagent consumption, and unlimited instruments and operators, which better fulfills the point-of-care needs of hazards analysis in food.
Nanozyme-mediated ratiometric fluorescence hydrogel for on-site detection of sulfite in food

Si-Qi Yang,Bao-Zhu Jia,Jie Liu,Hong Wang,Hong-Tao Lei,Lin Luo,Zhen-Lin Xu

DOI: https://doi.org/10.1016/j.foodchem.2024.141525

2024-10-04

Abstract:In this work, a ratiometric fluorescence hydrogel nanosensor was developed by integrating a composite consisting of o-phenylenediamine (OPD), manganese dioxide nanoflakes (MnO2 NFs), and N-doped carbon dots (N-CDs) into an agarose hydrogel for sulfite detection. MnO2 NFs demonstrated intense oxidase-like activity, facilitating the conversion of non-fluorescent OPD into yellow-emissive 2,3-diaminophenazine (DAP). As a result, a significant emission peak belongs to DAP, alongside the fluorescence quenching of N-CDs through FRET. Upon interaction with sulfite, MnO2 NFs lost their oxidase-like function. This process decreased the fluorescence of DAP and restored the blue fluorescence of N-CDs, producing a typical ratiometric response, ranging from 3 nM ∼ 400 μM, with a detection limit (LOD) of 3.79 nM. Employing a smartphone, the fluorescence color change demonstrated by the hydrogel sensor was translated into quantitative data (LOD: 8.44 nM). This hydrogel sensor offers an affordable, portable, and user-friendly solution for sulfite detection and food safety monitoring.
Handheld Device Adapted to Smartphone Cameras for the Measurement of Sodium Ion Concentrations at Saliva-Relevant Levels via Fluorescence

Michelle Lipowicz,Antonio Garcia

DOI: https://doi.org/10.3390/bioengineering2020122

IF: 5.046

2015-06-02

Bioengineering

Abstract:The use of saliva sampling as a minimally-invasive means for drug testing and monitoring physiology is a subject of great interest to researchers and clinicians. This study describes a new optical method based on non-axially symmetric focusing of light using an oblate spheroid sample chamber. The device is simple, lightweight, low cost and is easily attached to several different brands/models of smartphones (Apple, Samsung, HTC and Nokia) for the measurement of sodium ion levels at physiologically-relevant saliva concentrations. The sample and fluorescent reagent solutions are placed in a specially-designed, lightweight device that excludes ambient light and concentrates 470-nm excitation light, from a low-power photodiode, within the sample through non-axially-symmetric refraction. The study found that smartphone cameras and post-image processing quantitated sodium ion concentration in water over the range of 0.5-10 mM, yielding best-fit regressions of the data that agree well with a data regression of microplate luminometer results. The data suggest that fluorescence can be used for the measurement of salivary sodium ion concentrations in low-resource or point-of-care settings. With further fluorescent assay testing, the device may find application in a variety of enzymatic or chemical assays.
Total Synthesis of (+/-) Carbocyclic Polyoxin C and Its alpha-Epimer.

D. Zhang,Marvin J Miller

DOI: https://doi.org/10.1021/JO971711R

1998-01-22

Abstract:Carbocyclic polyoxin C (2) and its alpha-epimer 3 were synthesized in racemic form in an efficient and diastereodivergent fashion from cis-4-(N-tert-butylcarbamoyl)cyclopent-2-en-1-ol (5a). This synthesis features a Pd(0)-catalyzed substitution reaction, a novel, mild reduction of an alpha-nitro ester to an amino acid ester, and an improved procedure for uracil ring formation.
Target-induced inner-filter effect-based ratiometric sensing platform by fluorescence modulation of persistent luminescent nanoparticles and 2, 3-diaminophenazine

Chao Yao,Yan Guan,Rong Hu,Yunhui Yang,GuiQun Zhang,Yu Long Li

DOI: https://doi.org/10.1039/d2nj02056d

IF: 3.3

2022-06-20

New Journal of Chemistry

Abstract:A ratiometric fluorescence sensing platform with smartphone was designed for highly sensitive detection of glutathione (GSH), ascorbic acid (AA), and alkaline phosphatase (ALP) activity by modulation the inner filter effect (IFE) between persistent luminescent nanoparticles (PLNPs) and 2, 3-diaminophenazine (DAP). As an oxidase-mimetic nanomaterial, MnO2 nanosheets (MnO2 NS) can oxidize o-phenylenediamine (OPD) to DAP, which exhibited a yellow fluorescence emission signal at 558 nm, whereas the fluorescence of PLNPs at 475 nm was quenched through IFE. The presence of GSH and AA reduced MnO2 NS to Mn2+, which inhibited the oxidation of OPD, and effectively preserved the blue fluorescence of PLNPs at 475 nm. Further, ALP can catalytically hydrolyze L-ascorbic acid 2-phosphate trisodium salt (AAP) to yield AA. Therefore, a simple, high sensitivity and reproducibility, and good selectivity ratiometric fluorescence sensing platform was fabricated to detect GSH, AA and ALP activity by measuring the ratio of the fluorescence intensity of DAP and PLNPs. The linear range for GSH, AA and ALP activity were 1-100 μM, and 1 to 5 mU/mL, and the limit of detection were 0.2 μM, 0.33 μM and 0.3 mU/mL, respectively. Finally, the proposed sensor was utilized in spiked human serum and urine samples detection with satisfactory recoveries. Moreover, the red-green-blue (RGB) intensities of a color image were acquired via scanning measurement analysis with the help of the color-scanning application on smartphones and portable UV lamps, enabling real-time and in-situ detection of ALP activity, GSH, and AA.

chemistry, multidisciplinary

Inverse agonism at serotonin and cannabinoid receptors.

Portable Smartphone-based Colorimetric Analyzer with Enhanced Gold Nanoparticles for On-site Tests of Seafood Safety

Smartphone app-based/portable sensor for the detection of fluoro-surfactant PFOA

Smartphone App-Based/portable Sensor for the Detection of Fluoro-Surfactant PFOA.

A smartphone-based fluorospectrophotometer and ratiometric fluorescence nanoprobe for on-site quantitation of pesticide residue

Portable Smartphone-Based QDs for the Visual Onsite Monitoring of Fluoroquinolone Antibiotics in Actual Food and Environmental Samples

A smartphone-assisted portable sensing hydrogel modules based on UCNPs and Co3O4 NPs for fluorescence quantitation of hypoxanthine in aquatic products

A 3D printed smartphone optosensing platform for point-of-need food safety inspection

Ratiometric fluorescent sensing system for drug residue analysis: Highly sensitive immunosensor using dual-emission quantum dots hybrid and compact smartphone based-device

Ratiometric fluorescent signals-driven smartphone-based portable sensors for onsite visual detection of food contaminants

A dual-functional smartphone-based sensor for colorimetric and chemiluminescent detection: A case study for fluoride concentration mapping

A smartphone-supported portable micro-spectroscopy/imaging system to characterize morphology and spectra of samples at the microscale.

["Screening for abdominal aortic aneurysm in 65-year old men lacks scientific evidence].

Softening of fused‐silica capillaries during particle packing

A New Caffeine Detection Method Using a Highly Multiplexed Smartphone-Based Spectrometer

Rapid and sensitive point-of-need aflatoxin B1 testing in feedstuffs using a smartphone-powered mobile microfluidic lab-on-fiber device

A Novel Colorimetric and Fluorescent Dual-Mode 3D Paper-Based Microfluidic Aptasensor for the Point-of-care Detection of Sulfadimethoxine

Nanozyme-mediated ratiometric fluorescence hydrogel for on-site detection of sulfite in food

Handheld Device Adapted to Smartphone Cameras for the Measurement of Sodium Ion Concentrations at Saliva-Relevant Levels via Fluorescence

Total Synthesis of (+/-) Carbocyclic Polyoxin C and Its alpha-Epimer.

Target-induced inner-filter effect-based ratiometric sensing platform by fluorescence modulation of persistent luminescent nanoparticles and 2, 3-diaminophenazine