Abstract:Low-cycle fatigue (LCF) behavior of nickel-based precipitation-strengthened superalloy GH4145/SQ was investigated systematically under fully reversed total strain amplitude control conditions at 538°C in laboratory air. It was shown that the alloy exhibited a pronounced initial fatigue hardening followed by continuous fatigue softening to failure at high strain amplitudes, while at low strain amplitudes the initial hardening was followed by a well-defined saturation stage. Microstructure observations using optical and transmission-electron microscopy revealed that slip band density increased with increasing total strain amplitudes and the size of the γ′precipitates tended to reduction due to repeated shearing by the dislocations with continuous cyclic straining. The above changes in microstructures during cycling were essentially responsible for the fatigue hardening–softening behavior of the alloy. Both optical and SEM micrographs indicated that at low strain amplitudes crack propagation was basically transgranular, while at high strain amplitudes crack propagation was essentially intergranular. Bilinear behavior with a change of slope at a plastic strain amplitude of about 0.2pct was observed in cyclic stress–strain (CSS), Coffin–Manson (C–M) and plastic strain energy–life plots. A change in the number of operating slip systems and the fracture modes with the strain amplitude employed was used to explain this two-slope characteristic. In both the companion specimens test (CST) and the incremental step test (IST) methods the alloy exhibited non-masing type behavior. It was suggested that, for the first approximation, the half-life plastic strain energy could be calculated directly according to the equation without reckoning in the non-masing behavior.

Investigation of extremely low cycle fatigue behavior of low yield strength steel LY225 under different stress states

Low Cycle Fatigue Properties and Fracture Mechanism of Q345qC Steel and Its Welded Joint

A Modified Coffin-Manson Model for Ultra-Low Cycle Fatigue Fracture of Structural Steels Considering the Effect of Stress Triaxiality

Study on Ultra‐low Cycle Fatigue Fracture of Thick‐walled Steel Bridge Piers

Low Cycle Fatigue Property and Fracture Behavior of Low Yield Point Steels

Energy-based Low Cycle Fatigue Analysis of Low Yield Point Steels

Improved Ultra-Low Cycle Fatigue Fracture Models for Structural Steels Considering the Dependence of Cyclic Damage Degradation Parameters on Stress Triaxiality

Effects of low-cycle fatigue on static mechanical properties, microstructures and fracture behavior of 304 stainless steel

Mechanical performance of low-yield-point steel LYP225 under cyclic loading

Low cycle fatigue behavior of nickel-based superalloy GH4145/SQ at elevated temperature

Variation In Mechanical Properties, Microstructures And Fracture Behavior Of 304 Stainless Steel During Low-Cycle Fatigue

A Proposal on Ultra-Low Cycle Fatigue Damage Evaluation of Structural Steels

Mechanical Properties and Constitutive Models of Low Yield Point Steels

Extremely - low cycle fatigue fracture of Q235 steel at different stress triaxialities

Characterization of Low Cycle Fatigue Performance of New Ferritic P92 Steel at High Temperature: Effect of Strain Amplitude

Modeling of Low Cycle Behavior of P92 Steel Based on Cyclic Plasticity Constitutive Equations

Experimental and Constitutive Model Study of Structural Steel under Cyclic Loading

Experimental Study on the Cyclic Behaviour of Shear Links Made of BLY160 Steel

12.23: Research on low-yield-point steels in Tsinghua University

Ultra-Low Cyclic Fatigue Fracture of Q235B and Q345B Steels and Their Butt Welded Joints

Mechanical properties of low yield point steels subjected to low-cycle structural damage