Abstract:The ability to model the cyclic behavior of low yield point steel accurately is essential for its application to seismic design. In this study, uniaxial tests of monotonic and strain controlled cyclic loading are conducted to investigate the mechanical properties of the low yield point steel BLY160. As observed in the test, work-hardening is an important hysteretic characteristic, which significantly influences the energy dissipation capacity of the steel. However, the cyclic softening in both stiffness and stress evolve as the plastic strain accumulates, which is manifested in the decrease of both the stress amplitude and the elastic domain of the stress–strain hysteresis loops. This change in the shape of the cyclic loops is called the “flattening effect” in this paper. To describe the cyclic hardening and softening effect by using one unified set of material parameters, a more sophisticated model based on the concept of internal variables is proposed as an extension of the combined isotropic-kinematic hardening model. The novel idea of a “transformation zone” with the introduction of an additional internal variable is proposed to synchronize the updates of isotropic and kinematic hardening such that the simultaneous change in the stress amplitude and the elastic region can be reproduced. Note that the cyclic softening develops in three stages: incubation, growth and the stabilization period. The logistic function, which presents a curve with an “S” shape, is first used to trace the evolution of the softening. Finally, the model parameters are identified by the test data, and the accuracy of the proposed model is verified by comparing the simulated performance and the experimental response under different loading histories. The results demonstrate that the extended model can elaborately describe the evolutional processes of cyclic hardening and softening by incorporating characteristics, such as the nonlinear transient behavior from elastic to plastic status, early yield under reversed loading and strain history dependence.

Mechanical Properties and Constitutive Models of Low Yield Point Steels

A Modified Coffin-Manson Model for Ultra-Low Cycle Fatigue Fracture of Structural Steels Considering the Effect of Stress Triaxiality

12.23: Research on low-yield-point steels in Tsinghua University

Energy-based Low Cycle Fatigue Analysis of Low Yield Point Steels

Material Properties and Partial Factors for Resistance of Low Yield Point Steels in China

Low Cycle Fatigue Property and Fracture Behavior of Low Yield Point Steels

Mechanical performance of low-yield-point steel LYP225 under cyclic loading

Constitutive Model of Low-Yield Point Steel and Its Application in Numerical Simulation of Buckling-Restrained Braces

Investigation of extremely low cycle fatigue behavior of low yield strength steel LY225 under different stress states

A Proposal on Ultra-Low Cycle Fatigue Damage Evaluation of Structural Steels

Modeling of Low Cycle Behavior of P92 Steel Based on Cyclic Plasticity Constitutive Equations

Mechanical properties of low yield point steels subjected to low-cycle structural damage

Dynamic Mechanical Behavior at Elevated Temperatures and High Strain Rates of Low Yield Point Steels

Constitutive Model for Full-Range Cyclic Behavior of High Strength Steels Without Yield Plateau

Cyclic Hardening and Softening Behavior of the Low Yield Point Steel BLY160: Experimental Response and Constitutive Modeling

Experimental Study on the Cyclic Behaviour of Shear Links Made of BLY160 Steel

Experimental research and constitutive modelling of LYP160 steel considering the strain rate

Constitutive Model for Full-Range Elasto-Plastic Behavior of Structural Steels with Yield Plateau: Formulation and Implementation

Experimental and Modeling Study of High-Strength Structural Steel under Cyclic Loading

Experiment Investigation and Numerical Analysis on the Low-Yield-Point Steel Shear Panel Dampers

Experimental study on cyclic behaviour of low yield point steel buckling-restrained braces