Abstract:In a worldwide scenario which sees an increasing number of small satellite launches, novel mission concepts may be unlocked providing the spacecrafts with the very precise and rapid maneuvering capability that electric thrusters cannot guarantee. In this context, chemical thrusters appear to be a possible solution. This work aimed to experimentally study and solve the problem of ignition for 10 N hybrid rockets based on hydrogen peroxide. Firstly, the study analyzed the performance of a monopropellant engine capable of functioning as a hybrid injection system. In particular, the effects of the liquid mass injected, the initial temperature, and the supply pressure on the pulsed engine performance were experimentally investigated. The injected mass showed a greater impact on the performance with respect to the starting chamber temperature and injection pressure. This thruster also showed a good potential for space applications. In the second part of the work, the objective was to find an ignition procedure that reduced propellant consumption and eliminated the need for a glow plug. This is important because the electrical power consumption in real applications significantly affects other subsystems and is undesirable for chemical engines. Different ignition procedures were tested to emphasize their respective advantages and disadvantages, and the findings indicated that the concept of pulsed preheating is feasible with only a small amount of propellant consumption, while substantially decreasing the ignition duration from approximately 45 min to a maximum of just 3 min. Finally, similar ignition procedures were adopted using different fuels. The results showed that PVC and ABS, under the same operating conditions, ignite more easily than HDPE, which requires an oxidizer consumption approximately double that of the other two fuels. Considerations about the effect of chamber pressure and oxidizer mass flow rate on engine ignition were also included.

Study of a hybrid gas generator for a ducted rocket

Experimental Investigation of a Swirling-Oxidizer-Flow-Type Hybrid Rocket Engine Using Low-Melting-Point Thermoplastic Fuel and Oxygen

Stochastic Equilibrium Analysis to Optimize Solid Propellant Combustion Gas Composition

Bridging the Technology Gap: Strategies for Hybrid Rocket Engines

Experimental research on the rotating detonation in gaseous fuels–oxygen mixtures

Regression rate of paraffin-based fuels in hybrid rocket motor

Fuel Ignition in HTP Hybrid Rockets at Very Low Mass Fluxes: Challenges and Pulsed Preheating Techniques Using Palladium-Coated Catalysts

Prediction of the fuel regression-rate in a HDPE single port hybrid rocket fed by liquid nitrous oxide

Regression Rate and Performance Analysis via Ballistic Reconstruction of a small-scale H 2 O 2 -based Hybrid Rocket fuelled by Polyvinyl Chloride

Numerical simulation of reacting flow and fuel regression rate in N 2O/htpb hybrid rocket motor

Regression Rate and Combustion Efficiency of Composite Hybrid Rocket Grains Based on Modular Fuel Units

Experimental Investigation of N2O-PMMA Lab-Scale Hybrid Rocket Motor

Study on the Mechanical Properties of Solid Composite Propellant Used as a Gas Generator

Combustion performance and scale effect from N 2 O/HTPB hybrid rocket motor simulations

A computational model for the design of a nitrous oxide--paraffin wax hybrid rocket engine

CFD Analysis of Gas-Dynamic and Heat Transfer Processes in a Propulsion System Using Polymer Fuel

ROCKET ENGINE ON GRANULAR SOLID FUEL

Numerical Investigation of Work Cycle Characteristics in the Combustion Chamber of a Lox/Methane Liquid-Propellant Rocket Engine Featuring Reductant Power Gas Combustion

Characterizing combustion of a hybrid rocket using laser absorption spectroscopy

Evaluation of Boron Combustion for Ducted Rocket Applications Using Condensed Product Analysis

Pseudo-Two-Dimensional Modeling and Validation of a Hybrid Rocket Combustion Chamber