Abstract:The present work aims to fabricate CrMnFeCoNi high-entropy alloy (HEA) possessing outstanding wear and corrosion properties via laser additive manufacturing (LAM) and subsequent laser shock peening (LSP). The surface morphology, microstructure, microhardness and residual stress of LAM-fabricated specimen were characterized before and after LSP. Additionally, sliding wear and electrochemical corrosion experiments were conducted to evaluate the suitability of LSP for improving wear and corrosion resistance. Results indicated that friction coefficients and wear rates of LAM-fabricated specimens obviously decreased after LSP. Both untreated and LSP-treated specimens displayed uniform wear mechanisms, including abrasive and adhesive wear, while the wear damage level of the high-energy LSP-treated specimen was the mildest. Moreover, LSP-treated specimens exhibited lower corrosion current density and higher corrosion potential as compared with the untreated specimen, suggesting an enhancement in corrosion resistance. The hardened surface layer had positive effects on inhibiting furrow and spalling to resist material removal, and the compressive residual stress enhanced the adhesion of tribo-layers on the worn surface to protect the underlying layer from further damage. The grain refinement and compressive residual stress synergistically contributed to form compact passive films, thereby restraining the aggression of corrosive ions to enhance the corrosion resistance.

Tensile property and hot corrosion behavior of CrMnFeCoNi high-entropy alloy fabricated via laser melting deposition

Effects of Process Parameters on Microstructures and Tensile Properties of Laser Melting Deposited CrMnFeCoNi High Entropy Alloys

Laser additive manufacturing of CrMnFeCoNi high entropy alloy: Microstructural evolution, high-temperature oxidation behavior and mechanism

Striped Non-Uniform Corrosion Behavior of Non-Equiatomic FeMnCoCr High-Entropy Alloy Prepared by Laser Melting Deposition in 0.1 M H2SO4 Solution

Hot cracking, crystal orientation and compressive strength of an equimolar CoCrFeMnNi high-entropy alloy printed by selective laser melting

CoCrFeNiMo0.2 High Entropy Alloy by Laser Melting Deposition: Prospective Material for Low Temperature and Corrosion Resistant Applications

Microstructures and Mechanical Properties of CrMnFeCoNi High Entropy Alloys Fabricated Using Laser Metal Deposition Technique

Microstructure evolution and mechanical properties of Al CoCrFeNi high-entropy alloys by laser melting deposition

Effects of Mn addition on mechanical properties, fracture surface, and electrochemical corrosion resistance of CoCrFeNiAl high-entropy alloys

In-situ study of room temperature tensile deformation of a CrMnFeCoNi high-entropy alloy

Achieving excellent wear and corrosion properties in laser additive manufactured CrMnFeCoNi high-entropy alloy by laser shock peening

Anisotropic Response of CoCrFeMnNi High-Entropy Alloy Fabricated by Selective Laser Melting

Mechanical properties and fracture mechanism of as-cast MnFeCoCuNi high-entropy alloys

Strain hardening and strengthening mechanism of laser melting deposition (LMD) additively manufactured FeCoCrNiAl0.5 high-entropy alloy

A Study of the Microstructure and Mechanical and Electrochemical Properties of CoCrFeNi High-Entropy Alloys Additive-Manufactured Using Laser Metal Deposition

Microstructure and mechanical properties of AlCoCrFeMnNi HEAs fabricated by selective laser melting

Preparation of CrCoFeNiMn High-Entropy Alloy Coatings Using Gas Atomization and Laser Cladding: An Investigation of Microstructure, Mechanical Properties, and Wear Resistance

Investigation of the Microstructure and Properties of CoCrFeNiMo High-Entropy Alloy Coating Prepared through High-Speed Laser Cladding

Microstructure, mechanical and tribological properties of CoCrFeNi high-entropy alloy fabricated by different preparing processes

Influence of in-situ and ex-situ precipitations on microstructure and mechanical properties of additive manufacturing CoCrFeMnNi high-entropy alloys

Additive manufacturing of Al0.3CoCrFeNi high-entropy alloy by powder feeding laser melting deposition