An alternative vessel excitation algorithm to incorporate the trench effect into the fatigue analysis of steel catenary risers in the touchdown zone

Hossein Janbazi Rokni,Hodjat Shiri

DOI: https://doi.org/10.1016/j.apor.2022.103292

IF: 3.761

2022-09-01

Applied Ocean Research

Abstract:Cyclic penetration of steel catenary risers (SCR) into the seabed in the touchdown zone (TDZ) results in the formation of trenches several diameters deep, which has a significant impact on the riser fatigue life. Two main approaches have been proposed in the literature to incorporate the trench effect into the SCR's fatigue analysis, i.e., i) the insertion of a mathematically expressed trench profile into the touchdown zone, ii) cyclic trench formation using non-linear hysteretic riser-seabed interaction models. It has been repeatedly reported in the literature that the first approach leads to non-realistic pressure hot spots and damage profile distortion, particularly in the trench mouth; and the second approach suffers from premature stabilization of the hysteretic models resulting in limited embedment much less than the observed trench depths. In this study, an alternative vessel excitation algorithm called equivalent motion method (EMM) was introduced to incorporate the trench effect in the fatigue analysis. An equation was proposed for a given riser resting on an elastic seabed to obtain an equivalent vessel motion amplitude on a rigid seabed with the same cyclic damage. The study showed that the proposed EMM is able to predict the maximum cross-sectional stress range with an accuracy of over 90% in the majority of load cases. As an alternative solution, the proposed EMM was found to be a promising basis for further extension into the non-linear hysteretic riser-seabed interaction.

engineering, ocean,oceanography