Numerical simulation of loop formation in catenary risers on nonlinear uneven seabed

Jichuan Jia,Jijun Gu,Jun Huang,Lei Gao,Leilei Chen,Shujiang Wang

DOI: https://doi.org/10.1016/j.oceaneng.2022.113480

IF: 5

2022-12-29

Ocean Engineering

Abstract:During installation, catenary risers exhibit low tension in the touchdown zone (TDZ) of the seabed. Manufacturing deviations in the riser and the yaw rotation of the installation vessel may induce the unbalanced distribution of torsion. Combined with tension, loop formation may occur and lead to extreme damage. This study established a finite element model (FEM) for a steel catenary riser (SCR) using OrcaFlex software to analyze the effect of a nonlinear uneven seabed on loop formation. Four typical uneven seabed profiles, including a trench, an upheaval, a depression, and a slope, were constructed, while five key nonlinear seabed soil parameters, including mudline shear strength ( S um ), shear strength gradient ( ρ ), suction ratio ( f suc ), suction decay parameter ( λ suc ), and normalized maximum stiffness ( K max ) were proposed for parametric analysis to summarize the response rules of maximum tension, maximum compression and maximum bending moment of the riser loop. A specific sea area was selected for the case study to verify the applicability of the response rules. The case study also confirmed that the uneven seabed profile and nonlinear seabed soil properties had a combined effect on the riser loop, further preventing loop formation and reducing subsequent damage.

engineering, civil, ocean, marine,oceanography