Abstract:The wastewater containing Cd, Co, Fe, Cu, Cr, Mn, Ni and Pb ions are as trace metal pollutants. Water pollution caused by increment in industrialization and overpopulation reveals a major threat to human health. Adsorption is recognized as the effective and optimum method to remove water contaminations. The amorphous and porous form of silicon dioxide is silica gel widely used as an adsorbent. It can absorb moisture with traces of the target heavy metal ions. This research elaborates a simplistic, and reliable preconcentration column method highly developed for the determination of Cd2+, Fe3+, Co2+, Cr3+, Cu2+, Mn2+, Pb2+ and Ni2+ ions in model solutions and real water samples by flame atomic absorption spectrometry (FAAS). The proposed operation depends on the retention of the target ions from buffered model solutions on a silica gel filled up a column modified with vanadium(V) oxide sorbent followed by their desorption. SiO2/V2O5 is an efficient adsorbent due to its low cost, eco-friendly and high availability. The adsorbent morphological and interfacial physicochemical characterization was done using scanning electron microscopy, and Fourier transmission infrared spectroscopy, respectively. The 2.92 value achieved for the point of zero charges supports the experimentation for the heavy metal efficient adsorption. Quantitative recoveries were achieved at pH 10 with 50 mg of SiO2/V2O5 mass and adsorption capacity ranged from 28.96 μmol/g (Pb) to 214.86 μmol/g (Fe) with 1114.79 μmol/g in total. Simultaneous preconcentration effect was determined by the interference cations on the sorbent. The LOD varies from 8.42 to 50.56 μg/L and LOQ is achieved from 20.06 to 72.41 μg/L of 15 blank solutions. The developed preconcentration procedure was adequately implemented for the simultaneous analysis of eight metallic ions content in local river samples. The developed vanadium(V) oxide incorporated with silica gel is practicable as an economical and effective adsorbent to eliminate metallic ions from a liquid solution.

Ultrasonic assisted dispersive-solid phase extraction for preconcentration of trace metals in wastewater samples

Dispersive Liquid–Liquid Microextraction and Micro-Solid Phase Extraction for the Rapid Determination of Metals in Food and Environmental Waters

Enhancing Trace Metal Extraction from Wastewater: Magnetic Activated Carbon as a High-Performance Sorbent for Inductively Coupled Plasma Optical Emission Spectrometry Analysis

Simultaneous Measurements of Cr, Cd, Hg and Pb Species in Ng L-1 Levels by Interfacing High Performance Liquid Chromatography and Inductively Coupled Plasma Mass Spectrometry.

Zinc oxide – mesoporous silica nanocomposite: preparation, characterisation and application in water treatment for lead, cadmium and chromium removal

Magnetic chitosan-zeolite composite as an adsorbent in ultrasound-assisted magnetic solid phase extraction of tetracyclines in water samples

Synthesis of green nano sorbents for simultaneous preconcentration and recovery of heavy metals from water

Magnetic Luffa@metal-organic frameworks (MOF-199) nanocomposite for the solid phase microextraction of some metal ions at trace levels from food and water samples

Efficient extraction of heavy metals from aqueous environments using magnetic effervescent Tablet-Assisted ionic Liquid-Based dispersive Solid-Phase microextraction

Preparation of modified multiwalled carbon nanotubes (l-Arg-CS/MWCNTs-COOH/Fe3O4) as sorbent for dispersive solid phase extraction of Cu(II), Pb(II) and Cd(II) in wastewater samples

Non-conductive nanomaterial enhanced electrochemical response in stripping voltammetry: The use of nanostructured magnesium silicate hollow spheres for heavy metal ions detection

Synthesis and Characterization of Zinc Oxide Nanoparticle Anchored Carbon as Hybrid Adsorbent Materials for Effective Heavy Metals Uptake from Wastewater

Simultaneous preconcentration and determination of zirconium in environmental samples using ultrasound-assisted ionic liquid based dispersive liquid-liquid microextraction combined with spectrophotometry

Selective solid phase extraction and preconcentration of mercury(II) from environmental and biological samples using nanometer silica functionalized by 2,6-pyridine dicarboxylic acid

Exploring the synchronized effect of MWCNT/X-manganate (X-Cu, Zn) nanocomposite for the sensitive and selective electrochemical detection of Hg(II) and Pb(II) in water

Vortex‐Assisted Magnetic Solid‐Phase Extraction of Heavy Metals in Water and Food Samples Using Iron Oxide Nanoparticle‐Impregnated Carboxymethyl‐β‐Cyclodextrin

Development of microextraction methods for the determination of sulfamethoxazole in water and biological samples: modelling, optimization and verification by central composite design

Simultaneous on-line pre-concentration and determination of trace metals in environmental samples by flow injection combined with inductively coupled plasma mass spectrometry using silica gel modified with niobium(V) oxide

Simultaneous Determination of Mercury, Lead and Cadmium Ions in Water Using Near-Infrared Spectroscopy with Preconcentration by Thiol-Functionalized Magnesium Phyllosilicate Clay.

Solid-phase extraction using multiwalled carbon nanotubes and quinalizarin for preconcentration and determination of trace amounts of some heavy metals in food, water and environmental samples

Magnesium oxide loaded mesoporous silica: Synthesis, characterisation and use in removing lead and cadmium from water supplies