Abstract:In this paper, (0.5–5.0 wt%)Gd/316 L composites were prepared by vacuum arc melting, and the microstructure, thermophysical properties, and neutron shielding properties were analyzed deeply. The results showed that the Gd/316 L composites started solidification in primary ferrite mode and terminated solidification by a peritectic-type reaction forming (Fe, Ni, Cr) 3 Gd that is rich in Ni and Gd. In the peritectic-type reaction, local convection in the Ni-rich and Gd-rich peritectic liquid phase leads to the formation of multiple variants of (Fe, Ni, Cr) 3 Gd. The higher the Gd content, the greater the amount of (Fe, Ni, Cr) 3 Gd and ferrite, and the harder it is to keep the austenitic matrix of 316 L stainless steel. The solidification temperature range of Gd/316 L composites is 1074–1460 °C, which severely limits the ability to further process it by high-temperature deformation techniques such as hot rolling or hot forging. (Fe, Ni, Cr) 3 Gd preferentially nucleates and grows in the triangular region of austenite grain boundaries at 1074 °C. At 50–500 °C, with increasing Gd content, thermal expansion and thermal diffusion coefficients become decrease, and thermal conductivity and specific heat capacity increase. The trend of thermophysical property changes is favorable for SNF transportation and storage applications. The thermal neutron shielding properties of 1.0 wt%Gd/316 L composite is comparable to that of 4.45 wt% B content boron steel and 15 wt%B 4 C/Al composite. The Gd content in Gd/316 L composites material should not exceed 2.5 wt%. If the Gd content continues to increase, it is of little significance to improving shielding properties and material thinning. A shielding thickness of 3 mm is more appropriate for Gd/316 L composites. Too thin would not provide sufficient mechanical properties and increase processing and manufacturing costs.

Corrosion behavior of neutron absorbing Ti-Gd alloys in simulated spent nuclear fuel pool water

Effect of gadolinium addition on microstructure, mechanical properties and corrosion behavior of titanium alloys for spent fuel storage and neutron shielding

High-temperature corrosion behavior of hot-pressed Al-based Gd2O3-W shielding materials used in spent fuel storage

Hydrothermal Corrosion of Latest Generation of FeCrAl Alloys for Nuclear Fuel Cladding

Microstructure, thermophysical properties and neutron shielding properties of Gd/316 L composites for spent nuclear fuel transportation and storage

High-Temperature Corrosion Behaviors of Structural Materials for Lead-Alloy-Cooled Fast Reactor Application

Microstructure, Hardness and Corrosion Behavior of Ni-Ti Alloy with the Addition of Rare Earth Metal Oxide (Gd2o3)

Corrosion Behavior in Hydrochloric Acid of Pure Titanium after Ultrasonic Severe Surface Rolling

High-temperature corrosion-resistant alloy for waste-to-energy plants: Alloy designing, fabrication, and possible corrosion-resistance mechanism

Control mechanism of gadolinium-rich precipitates in new nuclear shielding FeCrNi alloys

Fabrication and characterization of novel high-efficiency and high-durability neutron-absorbing Ni-based alloys

Exploring the impact of Al alloying on microstructure and hot nitric acid corrosion resistance of Ti-xAl (x=0, 1, 2, 3, 4, 5) alloys

Oxide characteristics of 90Nb-10Zr alloy corroded under different water chemistry conditions

Addition of niobium in Fe-13Cr-4.5Al-2Mo alloy used as ATF cladding: Effect on high temperature water corrosion and in-situ electrochemistry

Hot deformation behavior and hot rolled properties of Gd-rich 316 L austenitic stainless steel neutron shielding material for spent nuclear fuel storage and transportation

Corrosion Behavior of FeCoNiCrAl High-Entropy Alloy in Molten NaNO3-KNO3

Study of microstructure and corrosion resistance of FeCrAl-Gd alloys

Corrosion Behavior of Microwave-Sintered Ti6Al6V2Sn Reinforced with Graphene Nanoparticles

Investigation of Corrosion Behaviors of Mg–6Gd–3Y–0.4Zr Alloy in NaCl Aqueous Solutions

A high-entropy alloy nitride protective coating for fuel cladding in high temperature lead-bismuth eutectic alloy

Corrosion Behavior of Ferritic 12Cr ODS and Martensitic X46Cr13 Steels in Nitric Acid and Sodium Chloride Solutions