Abstract:A cogent formulation study is described to optimize direct ink writing 3D printing with the right Ink gel kinetics and curing for large‐scale DIW manufacturing. The thermal, thermo‐mechanical, dielectric stability properties of DIW 3D printed parts are reported. Adhesives and sealants show fine rheology with good physical and mechanical properties as viscous pastes, a possible starting point for developing direct ink writing (DIW) 3D printing ink. However, many commercial adhesives and sealants take days or weeks to cure fully. DIW 3D‐printed parts made directly from these sealants are not designed for a scalable manufacturing process and high‐volume production. Moreover, most of these adhesives and sealants have volume shrinkage during cure. A systematic understanding of formulation methods and design principles for an elastomeric silicone DIW ink can overcome these issues. This study presents the cogent formulation development of a 3D printable thermoset elastomer silicone that gels and cures isotropically in minutes, reducing cycle time for rapid ink development with no shrinkage during cure. More specifically, we outline the principles of raw material selection of a formulation to achieve excellent rheology, printability, synchronized working, and gel time fitting requirements closer to scalable manufacturing. The reaction kinetics and their corresponding 3D‐printed structural properties are also described. Interest in future work is toward a rational DIW 3D printing ink material development protocol and use of machine learning (ML). Highlights Formulation method flexibility and design principle of DIW ink. Raw material selection principle to achieve optimal rheology for DIW printing. Ink gel kinetics for large‐scale DIW manufacturing. Hydrosilylation conversion over time at different ambient temperatures. Structural properties of DIW 3D printed parts.

Additive manufacturing of nanotube-loaded thermosets via direct ink writing and radio-frequency heating and curing

Rapid Manufacturing via Selective Radio‐Frequency Heating and Curing of Thermosetting Resins

Electrothermal free-form additive manufacturing of thermosets

Unstructured Direct Ink Write 3D Printing of Functional Structures with Ambient Temperature Curing Dual‐Network Thermoset Ink

3D printing of thermosets with diverse rheological and functional applicabilities

Freeform additive manufacturing of carbon fiber reinforced composites using dielectric barrier discharge-assisted Joule heating

High-Speed 3D Printing of High-Performance Thermosetting Polymers via Two-Stage Curing

Microwave-assisted 3D printing of epoxy resin ink using rectangular waveguide

Direct-ink-writing (DIW) 3D printing functional composite materials based on supra-molecular interaction

Embedded 3D printing of UV-curable thermosetting composites with continuous fiber

UV-Assisted Direct Ink Writing of Dual-Cure Polyurethanes

Fabrication of tough epoxy with shape memory effects by UV-assisted direct-ink write printing

Characterizing polydimethylsiloxane–carbon nanotubes composites manufactured using material extrusion additive technology: A rheological and mechanical analysis

A hybrid additive manufacturing process for production of functional fiber-reinforced polymer composite structures

Embedded Direct Ink Writing 3D Printing of UV Curable Resin/Sepiolite Composites with Nano Orientation

Phenolic Carbon Fiber Composite Inks for the Additive Manufacturing of Carbon/Carbon (C/C)

On the cogent formulation of an elastomeric silicone ink material for direct ink write (DIW) 3D printing

3D-Printing of Meso-structurally Ordered Carbon Fiber/Polymer Composites with Unprecedented Orthotropic Physical Properties

Direct Ink Writing of Carbon-Doped Polymeric Composite Ink: A Review on Its Requirements and Applications

Self‐Regulative Direct Ink Writing of Frontally Polymerizing Thermoset Polymers

Direct ink writing of polymer‐based materials—A review