Abstract:Timely detection of fatigue cracks is necessary to avoid catastrophic failure of rotating machines which can lead to economical losses and accidental risk. This paper presents an exhaustive literature survey on theoretical and experimental vibration analysis of the rotating shaft in the presence of crack. Various non-destructive methods adopted by several researchers for crack detection in rotating machinery have been discussed. The vibration-based crack detection methods such as vibration-based diagnostics methods and vibration-based signal processing techniques have been broadly categorized along with their advantages and disadvantages. In general, various methodologies such as breathing mechanism, finite-element method, Hilbert–Huang transform, artificial intelligence techniques, wavelet transform and wavelet finite-element transform have been applied to investigate the presence of crack in the rotating shaft. The parameters such as natural frequencies, \(1{\times }\), \(2{\times }\) and \(3{\times }\) harmonic components of dynamic response, critical speeds and whirl orbits have been significantly influenced due to the presence of crack in the rotating shaft. Several studies have been carried out to study variations in these parameters. Still, there is a need of more reliable and accurate modelling approach to detect variations in these parameters. In this paper, an attempt has been made to deliver all the modelling approaches implemented by the various researchers to detect crack within the rotating shaft. The modelling approaches are categorized based on the methodologies adopted by the various researchers to detect crack. Moreover, the critical observations made from the proposed modelling approaches are summarized and presented.

Influence of tooth crack parameters on bearing vibration signal of a geared rotor

Study on Fatigue Degradation Behavior of a Cracked Rotor Subjected to Lateral Vibration

Effect of spur gear crack on rotor dynamic response

An improved time-varying mesh stiffness algorithm and dynamic modeling of gear-rotor system with tooth root crack

Dynamics Behavior of Multi-Disk Flexible Rotor System with Transverse Crack

Vibrations Of Cracked Gear-Rotor System: Tooth Root Crack Versus Shaft Transverse Crack

Dynamic modeling and vibration analysis of cracked rotor-bearing system based on rigid body element method

Vibration Analysis of Rotor with Transverse Surface Cracks

The influence of cracks in rotating shafts

Dynamic Analysis of A Geared Rotor System Considering A Slant Crack on the Shaft

Time-varying Mesh Stiffness Algorithm Correction and Tooth Crack Dynamic Modeling

Detecting the 3D Spatial Varying Crack Evolution-Induced Vibration of Gearbox Through a System Level Rigid-Flexible Coupling Model

Experimental Study On Lateral And Torsional Vibration Of Cracked Rotor With Torsional Excitation

Nonlinear dynamic modeling and analysis of a helicopter planetary gear set for tooth crack diagnosis

The influence of crack breathing and imbalance orientation angle on the characteristics of the critical speed of a cracked rotor

Modelling and analysis of a cracked rotor: a review of the literature and its implications

Dynamic Simulation of Tooth Root Crack Failure in Planetary Gearbox Based on Torsional Vibration Signal

The Vibration Of A Transversely Cracked Rotor Supported By Anisotropic Journal Bearings With Speed-Dependent Characteristic

Influence of alternating loads on nonlinear vibration characteristics of cracked blade in rotor system

Vibration based crack identification of running rotor system

Vibration characteristic analysis of spur gear systems under tooth crack or fracture