Abstract:The high speed and high power density electromechanical system for the electric vehicle is urgently required to meet stricter emission regulation and achieve higher performance. Therefore, the electromechanical coupling effect is becoming more strengthened and may significantly degrade the performance of the motor and gear system. When gear or motor failures like gear tooth crack or rotor bar breakage are present, the operation safety of the electric vehicle would be threatened. So the exploration of the fault features for the motor-gear system is crucial for prevention of disastrous consequences. In this paper, the fault vibration features of the motor-gear system with gear root crack and motor rotor error under various excitations from both motor and gear transmission system are investigated. The electromechanical dynamic model considering the nonlinear air-gap permeance and time-varying mesh stiffness is employed, and the gear tooth root crack fault and the rotor bar breakage are integrated into the dynamic model to acquire the dynamic characteristics with faults. Then, the angular-synchronous average technique is applied to strengthen the statistical characteristics of fault vibration signal and eliminate the effect of speed variation due to the external excitation. The statistical indicators extracted from the angular-synchronous average vibration signals can reveal the progression of gear faults for the gear transmission without motor rotor error. However, the analyzed results indicate that the popular statistical indicators would fail to detect the early tooth fault when the motor rotor error is coupled.

What problem does this paper attempt to address?

The main problem that this paper attempts to solve is to explore the changes in the vibration characteristics of the motor - gear system in the case of gear tooth root cracks and motor rotor bar faults. Specifically, the research focuses on the following points: 1. **Vibration characteristics caused by faults**: When there are faults in the gear or the motor (such as gear tooth root cracks or motor rotor bar breaks), these faults will lead to a decline in the dynamic performance of the system and even threaten the safe operation of electric vehicles. Therefore, studying the vibration characteristics caused by these faults is crucial for preventing catastrophic consequences. 2. **Electromagnetic - mechanical coupling effect**: As electric vehicles have increasingly higher requirements for high - power density and high - speed, the electromagnetic - mechanical coupling effect of the motor - gear system becomes more significant. This coupling effect has a significant impact on the performance of the system, especially in the fault state. 3. **Effectiveness of fault detection techniques**: Existing gear fault detection techniques may be effective under single - fault conditions, but in the case where there are faults in both the motor and the gear simultaneously, these techniques may fail. Therefore, the research aims to explore fault detection methods under such complex conditions. ### Research methods and results 1. **Dynamic modeling**: - The paper adopts an electromagnetic - mechanical dynamic model that takes into account the nonlinear air - gap permeance and time - varying meshing stiffness. - The gear tooth root crack and motor rotor bar break faults are integrated into the dynamic model to obtain the dynamic characteristics in the fault state. 2. **Angle - synchronous averaging technique**: - The angle - synchronous averaging technique is applied to enhance the statistical characteristics of the fault vibration signal and eliminate the influence of the rotational speed change caused by external excitation. - The statistical indicators extracted from the angle - synchronous average vibration signal can reveal the development of gear faults in the gear transmission system. 3. **Experimental verification**: - The dynamic characteristics of the motor - gear transmission system are experimentally studied, and the dynamic planetary gear transmission model is verified. - The experimental results show that there are obvious amplitudes related to the meshing frequency and its harmonic frequencies in the vibration signal spectrum. 4. **Theoretical analysis**: - When there is a crack at the gear tooth root, the meshing stiffness will decrease due to the reduction of the effective cross - section at the tooth root. - The break of the motor rotor bar will cause additional electromagnetic torque harmonics, resulting in a speed drop and periodic fluctuations in the system. - The angle - synchronous averaging technique can effectively eliminate the adverse effects of speed transient fluctuations, thereby detecting faults more accurately. ### Conclusion Through the above research, the paper proposes an effective fault detection method, which can accurately identify and monitor faults in the case where there are both gear tooth root cracks and motor rotor bar breaks in the motor - gear system. This provides important technical support for the safe operation of electric vehicles.

Vibration Feature Evaluation of the Motor-Gear System with Gear Tooth Crack and Rotor Bar Error

Dynamic modeling and vibration analysis for the gear-rotor-bearing system with localized failures

Research on the effect of tooth root defects on the motor-multistage gear transmission system

Vibration characteristic analysis of spur gear systems under tooth crack or fracture

An improved time-varying mesh stiffness algorithm and dynamic modeling of gear-rotor system with tooth root crack

Detecting the 3D Spatial Varying Crack Evolution-Induced Vibration of Gearbox Through a System Level Rigid-Flexible Coupling Model

Root Crack Identification of Sun Gear in Planetary Gear System Combining Fault Dynamics with VMD Algorithm

Vibration characteristics of railway locomotive induced by gear tooth root crack fault under transient conditions

Resultant Vibration Signal Model Based Fault Diagnosis of a Single Stage Planetary Gear Train with an Incipient Tooth Crack on the Sun Gear

Nonlinear dynamic modeling and analysis of a helicopter planetary gear set for tooth crack diagnosis

Dynamic modeling and analysis of planetary gear system for tooth fault diagnosis

Effect of spur gear crack on rotor dynamic response

Dynamic modeling and analysis of multistage planetary gear system considering tooth crack fault

Vibration Analysis of Two-Stage Helical Gear Transmission with Cracked Fault Based on an Improved Mesh Stiffness Model

Dynamic Modelling of Gearbox with Multiple Localized Defects and Its Coupled Vibration Analysis

Dynamic Characteristics of Spur Gear System with Tooth Root Crack Considering Gearbox Flexibility

Dynamic Simulation of Planetary Gearbox With Tooth Root Crack Based on a Rigid-Flexible Coupled Model

Vibration modulation features analysis of fixed-shaft gear train considering speed fluctuation and flexible transmission path based on signal convolution model

Vibration fault features of planetary gear train with cracks under time-varying flexible transfer functions

Dynamic Simulation of Tooth Root Crack Failure in Planetary Gearbox Based on Torsional Vibration Signal

Vibrations Of Cracked Gear-Rotor System: Tooth Root Crack Versus Shaft Transverse Crack