Abstract:Passivating contact solar cells have gradually become the mainstream cell technology due to their excellent performance, and further improving the conversion efficiency has become a focus of subsequent research. Typically, achieving excellent field-effect passivation and low contact resistivity in doped polycrystalline silicon (poly-Si) solar cells requires heavy phosphorus doping. However, this approach can lead to a predicament where excessive phosphorus diffuses into the Si substrate during annealing, causing recombination losses. To address this challenge, a tandem passivation contact structure incorporating an intrinsic amorphous silicon (a-Si ( i)) film within the passivation layers is introduced to retard the diffusion of phosphorus into the Si substrate. Comprehensive characterizations of the tandem structure were carried out to delve into the underlying mechanisms of films with the integrated a-Si ( i) layer, including simulations, surface microscopy, active dopants profiling, crystallographic structure, chemical bonding, elemental distribution, and electrical properties. Simulations revealed that the inserted intrinsic layer effectively counteracts the clustering of phosphorus atoms, leading to a more even distribution during crystal growth. Furthermore, active dopant profiles indicate the potential of the introduced a-Si ( i) layer to tailor the in-diffused dopant profile. Microscopy investigations revealed the occurrence of blistering when the a-Si ( i) thickness exceeds 30 nm. Passivation and contact performances of TOPCon solar cells were assessed as the a-Si ( i) thickness was varied. Notably, optimal electrical properties were achieved with 20 nm a-Si ( i) thickness. At this thickness, the implied open-circuit voltage ( iV) of the hydrogenated lifetime sample was promoted to more than 736.6 mV on the polished wafer, corresponding to the lowest single-side saturation current density ( J) of 4.3 fA/cm . In addition, a low contact resistivity of 1.4 mΩ·cm was achieved. Based on this tandem passivation contact structure, industrial-sized TOPCon solar cells were fabricated, giving an average efficiency of 23.83%, 0.25% higher than that of the baseline counterparts on the production line. The above results demonstrate the role of the a-Si ( i) film as a buffer layer, retarding the diffusion of phosphorus into the Si substrate and obtaining a better passivation effect. This enables us to further tailor the doping profile for high-efficiency solar cells. Our work thus highlights a promising strategy to improve the performance of TOPCon solar cells and showcases its potential for implementation in industrial manufacturing.

24.4% industrial tunnel oxide passivated contact solar cells with ozone-gas oxidation Nano SiOx and tube PECVD prepared in-situ doped polysilicon

Enhanced Passivation Effect of Tunnel Oxide Prepared by Ozone‐Gas Oxidation (OGO) for n‐Type Polysilicon Passivated Contact (TOPCon) Solar Cells

Atomic scale controlled tunnel oxide enabled by a novel industrial tube‐based PEALD technology with demonstrated commercial TOPCon cell efficiencies > 24%

Plasma Treatment for Chemical SiOx Enables Excellent Passivation of P-Type Polysilicon Passivating Contact Featuring the Lowest J0 Of-6 Fa/cm2

Tunnel Oxide Deposition Techniques and Their Parametric Influence on Nano-Scaled SiOx Layer of TOPCon Solar Cell: A Review

Plasma treatment for chemical SiOx enables excellent passivation of p-type polysilicon passivating contact featuring the lowest J of ∼6 fA/cm2

Highly improved passivation of PECVD p-type TOPCon by suppressing plasma-oxidation ion-bombardment-induced damages

Effect of plasma-assisted N 2 O/Ar oxidation on TOPCon solar cells

Nanoscale SiOx Tunnel Oxide Deposition Techniques and Their Influence on Cell Parameters of TOPCon Solar Cells

Theoretical exploration towards high-efficiency tunnel oxide passivated carrier-selective contacts (TOPCon) solar cells

A silicon oxide-based highly transparent passivating contact for crystalline silicon solar cells approaching efficiencies of 23%

Effects of PECVD preparation conditions and microstructures of boron-doped polysilicon films on surface passivation of p-type tunnel oxide passivated contacts

Ultra-thin silicon oxide tunnel layer passivated contacts for screen-printed n-type industry solar cells

Numerical Simulation and Experiment of a High-Efficiency Tunnel Oxide Passivated Contact (TOPCon) Solar Cell Using a Crystalline Nanostructured Silicon-Based Layer

Highly transparent oxygen‐doped poly‐Si with in‐situ N2O oxidant for poly‐Si passivating contacts in perovskite/silicon tandem solar cells

Screen-printed n-type industry solar cells with tunnel oxide passivated contact doped by phosphorus diffusion

Unraveling the Passivation Mechanisms of C-Si/Siox/Poly-Si Contacts

Novel Tandem Passivated Contact Approach for High-Efficiency Industrial TOPCon Solar Cells

Ultrathin silicon oxide prepared by in-line plasma-assisted N2O oxidation (PANO) and the application for n-type polysilicon passivated contact

Enhancing industrialization TOPCon solar cell efficiency via comprehensive anti-reflection passivation film optimization