Abstract:The compressive mechanical properties of concrete-based materials are strongly affected by the presence of additions in the mix and load application velocity. Fiber-Reinforced Rubberized Concrete (FRRC) was recently proposed in the literature as a concrete-based material with the aim of obtaining a ductile material with reduced environmental burden and characterized by excellent energy absorption performances during impact loading. FRRC joins and balances the advantages and drawbacks of Fiber Reinforce Concrete (FRC) and Rubberized Concrete (RuC). However, its behavior has rarely been investigated under dynamic loadings, although gaining sufficient knowledge on their high strain rate behavior is crucial for their full-scale application. This study aims to investigate the high-strain rate compressive behavior of FRRC with fine rubber aggregates and micro-straight steel fibers. Tests were performed using conventional quasi-static loading with a compressive testing machine and high-strain rate tests with a 080-mm Split Hopkinson Pressure Bar (SHPB) for strain rates up to 200 s(-1). The experimental program comprises the characterization of Plain Concrete (PC), FRC, RuC, and FRRC with a full test matrix (a total of 192 specimens) covering fiber contents up to 1.5% and rubber volume substitution ratios up to 30%. The micro-scale characterization of the material using SEM scans provided a complete understanding of the observed macro-scale behavior. A high-speed camera was used to capture the cracking development processes. The measurements both for quasi-static and dynamic tests indicate that the addition of fibers improves the ductility or toughness with a slight increase in the compressive strength and the substitution with rubber aggregates significantly reduces the compressive strength with improved ductility or toughness. The combination of fiber and rubber (FRRC) leads to a combination of the previously described single marginal effects. The dynamic tests reveal the marked strain rate dependency, although specimens with large rubber volume substitution were more sensitive to the strain rate effect within the considered test range. Based on the test data, data-driven models for strength reduction factor (SRF) and dynamic increase factor (DIF) are proposed for different types of FRRC. The image-based waveform discussion provides evidence of the "double-peak" phenomenon highlighting the different features of the observed signals and damage evolution. Ultimately, this study indicates that FRRC has an excellent high-strain rate compressive behavior and can be a promising material to be employed to protect structures against impact and blast loads.

An experimental study on a novel reclaimed rubber compound for fiber-reinforced seismic isolators

Probabilistic Models of Concrete Compressive Strength and Elastic Modulus with Rubber Aggregates

Alternatives for Enhancing Mechanical Properties of Recycled Rubber Seismic Isolators

High-strain rate compressive behavior of Fiber-Reinforced Rubberized Concrete

Experimental Study on the Mechanical Properties of Nylon Fabric-Reinforced Elastomeric Isolators (N-FREIs)

Investigation of seismic fragility curves of unbonded FREIs: Adaptive characteristics and modeling sensitivity

Rubber-sand infilled soilbags as seismic isolation cushions: experimental validation

Thermal Conductivity of Fiber-Reinforced Foam Concrete Filled with Crumb Rubber Powders

Lateral load performance and seismic demand of unbonded scrap tire rubber pad base isolators

Sustainable use of recycled carbon fiber reinforced polymer and crumb rubber in concrete: mechanical properties and ecological evaluation

Tire-derived reclaimed rubber as a secondary raw material for rubber foams: in the framework of circular economy strategy

Dynamic Calibration of the Transverse Elastic Modulus of Shredded Rubber for Use in Seismic Isolation

Modelling and Seismic Response Analysis of Existing Italian Residential RC Buildings Retrofitted by Seismic Isolation

Rubberized mortar: The influence of aggregate granulometry in mechanical resistances and acoustic behavior

Preparation and characterization of natural rubber–based new elastomers for high-damping base isolation systems

Concrete with a High Content of End-of-Life Tire Materials for Flexural Strengthening of Reinforced Concrete Structures

A Study of the Compressive Behavior of Recycled Rubber Concrete Reinforced with Hybrid Fibers

Damping acoustic properties of reclaimed rubber/seven-hole hollow polyester fibers composite materials

An experimental study on the post-cracking behaviour of Hybrid Industrial/Recycled Steel Fibre-Reinforced Concrete

Seismic performance of structure equipped with a new rubber bracing damper system

Reusability of Scrap Rubber, Tire Shredding, Recycled PVC and Fly Ash for Development of Composites with Vibration Damping Ability