Abstract:Recently, a growing interest has been focused on utilizing alternative recycled sound-absorbing construction materials. This study investigates phenolic resin-bonded recycled denim as a potential replacement to synthetic sound absorbers. To this end, the discarded denim was collected from municipal waste sorting plants and shredded to back down into fiber form. Solid novolac resin and fibers were fed to the air-laid machine. The hybrid structures were then introduced to an oven to cure the resin and form an integrated flexible structure. Nonwoven composites at different bulk densities (61–102 kg/m3) and resin contents (10–35%) were produced. The sound absorption coefficient (SAC) of composite samples was determined using the impedance tube method. The relationship between SAC versus frequency was modeled using a logarithmic regression and the phenomenological model of Johnson-Champoux-Allard (JCA). Additionally, the noise reduction coefficient (NRC) values of the samples were compared with those of some commercially available glass wool nonwovens of the same physical properties. The results showed that the mechanism of sound absorption for samples is viscosity resistance, in which SAC at low frequencies is low, however at high frequencies is quite significant. The results of the statistical analysis confirmed that both the bulk density and resin content have a significant effect on the SAC. It was found that SAC rises with increasing the areal density and bulk density, and this raise is more pronounced at higher bulk densities. It was also observed that for samples of the same bulk density, SAC increases with increasing the resin content. The results indicated that resin-bonded recycled denim composites could successfully compete with commercial glass wool samples for noise control, apart from being environmentally friendly and economically viable.

Damping acoustic properties of reclaimed rubber/seven-hole hollow polyester fibers composite materials

Preparation and Properties of Damping Materials in Multi-Phase System

Enhanced Sound Insulation and Mechanical Properties Based on Inorganic Fillers/thermoplastic Elastomer Composites

Morphological Structure, Rheological Behavior, Mechanical Properties and Sound Insulation Performance of Thermoplastic Rubber Composites Reinforced by Different Inorganic Fillers

Fabrication of Millable Polyurethane Elastomer/Eucommia Ulmoides Rubber Composites with Superior Sound Absorption Performance

Thermal Conductivity of Fiber-Reinforced Foam Concrete Filled with Crumb Rubber Powders

Study of acoustic transmission losses in particle-reinforced rubber-based membrane-type acoustic metamaterials

Mechanic and Acoustic Properties of the Sound-Absorbing Material Made from Natural Fiber and Polyester

Recyclable Elastomers with High Mechanical Performance and Vibration-Damping Property Via Triple Dynamic Bonds

Reusability of Scrap Rubber, Tire Shredding, Recycled PVC and Fly Ash for Development of Composites with Vibration Damping Ability

Structure and properties of damping chlorinated butyl rubber composites with hyperbranched polyester grafted hindered phenol

Polymer composite material fabricated from recycled polyethylene terephthalate (PET) with polyurethane binder for potential noise control applications

Research on the Sound Insulation Performance of Composite Rubber Reinforced with Hollow Glass Microsphere Based on Acoustic Finite Element Simulation

Effect of elastomeric filler content on the acoustic and mechanical response of natural fiber-based hybrid composites

Porous resin-bonded recycled denim composite as an efficient sound-absorbing material

Bio-based polyurethane/hindered phenol AO-80 composites for room temperature high damping properties

A Novel Method to Characterize the Damping Capacity of EPDM/CIIR Blends Using Vibrating Rubber Balls

Mechanical, thermal, and water absorption properties of HDPE/barley straw composites incorporating waste rubber

SOUND ABSORPTION PROPERTIES OF RECYCLED POLYESTER FIBROUS ASSEMBLY ABSORBERS

Acoustical, vibrational, and thermal investigations of pyrolytic carbon black reinforced natural rubber composites

Development of nitrile rubber/eucommia ulmoides gum composites for controllable dynamic damping and sound absorption performance