Abstract:Environmental issues are brought up concerning the production of Portland cement. As a result, biocement serves as a reliable substitute for Portland cement in green construction projects. This study created a brand-new technique to create high-quality biocement from agricultural wastes. The technique is based on nanomaterials that improve and accelerate the "Microbially Induced Calcite Precipitation (MICP)" process, which improves the quality of the biocement produced. The mixture was further mixed with the addition of 5 mg/l of graphitic carbon nitride nanosheets (g-C 3 N 4 NSs), alumina nanoparticles (Al 2 O 3 NPs), or silica nanoparticles (SiO 2 NPs). The cement: sand ratio was 1:3, the ash: cement ratio was 1:9, and water: cement ratio was 1:2. Cubes molds were prepared, and then cast and compacted. Subsequent de-molding, all specimens were cured in nutrient broth-urea (NBU) media until testing at 28 days. The medium was replenished at an interval of 7 days. The results show that the addition of 5 mg/l of g-C 3 N 4 NSs with corncob ash delivered the highest "Compressive Strength" and the highest "Flexural Strength" of biocement mortar cubes of 18 and 7.6 megapascal (MPa), respectively; and an acceptable "Water Absorption" (5.42%) compared to all other treatments. This treatment delivered a "Compressive Strength", "Flexural Strength", and "Water Absorption" reduction of 1.67, 1.26, and 1.21 times the control (standard Portland cement). It was concluded that adding 5 mg/l of g-C 3 N 4 NSs to the cementitious mixture enhances its properties, where the resulting biocement is a promising substitute for conventional Portland cement. Adding nanomaterials to cement reduces its permeability to ions, increasing its strength and durability. The use of these nanomaterials can enhance the performance of concrete infrastructures. The use of nanoparticles is an effective solution to reduce the environmental impact associated with concrete production.

Effects of GO/Al2O3 and Al2O3 Nanoparticles on Concrete Durability against High Temperature, Freeze-Thaw Cycles, and Acidic Environments

Effects of FeNi3/SiO2 /GO nanoparticles on the mechanical and durability properties of concrete

An investigation of durability and the mechanical properties of ultra-high performance concrete (UHPC) modified with economical graphene oxide nano-sheets

Concrete Containing Graphene Oxide (Go) for Improving Mechanical and Durability Performances

Hybrid effect of nano-alumina and nano-titanium dioxide on Mechanical properties of concrete

INFLUENCE OF GRAPHENE OXIDE ON THE MICROSTRUCTURE AND DURABILITY PROPERTIES OF CONCRETE

The Macro and Micro Effects of Graphene Oxide and Silica Fume on the Performance of Concrete under Standard Curing Conditions

Analyzing the Effects of Nano-Titanium Dioxide and Nano-Zinc Oxide Nanoparticles on the Mechanical and Durability Properties of Self-Cleaning Concrete

An Insight into Durability, Electrical Properties and Thermal Behavior of Cementitious Materials Engineered with Graphene Oxide: Does the Oxidation Degree Matter?

Extra-Low Dosage Graphene Oxide Cementitious Nanocomposites: A Nano- to Macroscale Approach

Investigation of the Effects of Graphene and Graphene Oxide Nanoplatelets on the Micro- and Macro-Properties of Cementitious Materials

Effects of nano-alumina on Portland concrete at low temperatures (5 °C)

Effects of Al2O3, SiO2 nanoparticles, and g-c3n4 nanosheets on biocement production from agricultural wastes

Study on the damage resistance and deterioration behavior of GO concrete under the harsh environment

Combined Effect of Silicon Dioxide and Titanium Dioxide Nanoparticles on Concrete Properties

Synthesis process and characterization of graphene oxide (GO) as a strength-enhancing additive in concrete

Influence of Nanoparticles on Fluidity and Mechanical Properties of Cement Mortar

The Contribution of Nano-Alumina to Ultra-High-Performance Cement-Based Systems

Influence of synthesized nanomaterials in the strength and durability of cementitious composites

Effect of Graphene Oxide Nanosheets on Physical Properties of Ultra-High-Performance Concrete with High Volume Supplementary Cementitious Materials