Abstract:A range of Fe-Cr-Ni alloys are used in nuclear power plants due to their high mechanical strength and corrosion resistance. As a major component of these alloys, Ni contributes to the formation of austenite microstructures. In many nuclear reactor applications the alloys are exposed to ionizing radiation (g-rays) that can continuously decompose water to a range of highly redox active species (such as •OH, H2O2, O2). The change in water chemistry induced by radiation can affect both the general and localized corrosion behaviour of these alloys. In particular, its influence on the susceptibility of an alloy to localized corrosion such as crevice and stress corrosion cracking (SCC) are important for assessment of reactor component aging. As well, corrosion products that dissolve into the reactor coolant can be transported to the reactor core where they can be neutron activated. This can create a radiological hazard for reactor maintenance personnel. Thus, quantifying the rate of general corrosion and the corrosion product transport in a reactor are important safety, operation and maintenance issues. It has been well established that the type of oxide that forms on a surface is a critical factor in determining both general and localized corrosion behaviour. Both alloy composition and water chemistry affect the type of oxide that forms. Systematic studies that examine the effect of alloy composition on corrosion are rare and those available have been conducted mostly from a metallurgical perspective. There are even fewer studies that examine the combined effects of alloy composition and corrosion environment. A fundamental understanding of the mechanism by which the Fe to Ni ratio in a steel alloy influences the corrosion rate in different environments will provide valuable information that can be used for alloy selection and usage. We have investigated the effect of the Fe to Ni ratio of alloy on oxide formation and growth kinetics. For this study, customized steel alloys with different Ni contents and constant Cr content (18 ± 1 %) were prepared. The Ni content ranged from 15 to 25 wt.%, within the range between AISI 316L and Alloy 800 (Fig. 1). The corrosion kinetics was investigated using a combination of coupon corrosion tests and electrochemical measurements. These measurements were augmented by oxide surface and depth analyses using several spectroscopic and imaging techniques, and by post-test solution analyses for dissolved metal loss. We found that the oxide formed at pH 10.6 and 80 °C has a graded layer structure, consisting of a mixed spinel oxide (FeCr2O4/Fe3O4/NiFe2O4) as an inner layer and Ni(OH)2 as an outer layer. The increase in Ni content from 15 to 25 wt.% does not affect the inner layer but increases the thickness of the Ni(OH)2 layer. The increase in Ni content also decreases the total amount of dissolved metal loss. Gamma-irradiation of the corroding system increases the corrosion potential on these alloys. Correspondingly, gamma-radiation accelerates the formation of passive oxide layers and decreases the overall rate of metal dissolution. The observed kinetics of oxide growth and metal dissolution can be explained by the competition kinetics of oxide growth and dissolution for oxidized metals. Figure 1

Absorption effect of pure nickel on the corrosion behaviors of the GH3535 alloy in tellurium vapor

Effect of tantalum and Ni Ta barriers on inter-diffusion between nickel coating and GH3535 alloy at 700 °C

Effect of Mn addition on the tellurium embrittlement resistance of GH3535 alloy

Effect of Te on the corrosion behavior of GH3535 alloy in molten LiF-NaF-KF salt

Effect of Nb contents on the surface tellurization and intergranular cracking behaviors of Ni-Nb-C alloys

Corrosion Behavior and Elements Interdiffusion Between a Ni Coating and GH3535 Alloy with and Without a CrN Barrier in Molten Fluoride Salts

Tellurium segregation-induced intergranular corrosion of GH3535 alloys in molten salt

Mechanism of tellurium induced nickel alloy corrosion in molten LiCl-KCl salt

An Al 2 O 3 /Ni–Al tritium permeation barrier coating for the potential application in thorium-based molten salt reactor

Effect of Nickel Content on the Corrosion Behaviour of Stainless Steel at 80 °C

Enhancement of Te infiltration into Inconel 718 surface layer through dynamic microwave thermal shock

Corrosion behavior of pure metals (Ni and Ti) and alloys (316H SS and GH3535) in liquid GaInSn

Effect of Yttrium on Intergranular Embrittlement Behavior of GH3535 Alloy Induced by Tellurium

OXIDATION BEHAVIORS OF THE HIGH TEMPERATURE ALLOYS IN THE IMPURE HELIUM AND ARGON

Preparation of -Al<sub>2</sub>O<sub>3</sub>/NiAl multilayer coatings on GH3535 superalloy surface by pack cementation and subsequent in-situ oxidation

Preparation of α-Al2O3/NiAl multilayer coatings on GH3535 superalloy surface by pack cementation and subsequent in-situ oxidation

Corrosion Behavior of GH3535 Alloy Induced by Selenium

Effect of irradiation damage defects on the impurity containing molten salt corrosion behavior in GH3535 alloy

Effect of metallic ion products on the corrosion of GH3535 alloy in a eutectic (Li, Na, K) F melt

Corrosion Behavior of the GH3535 and C276 Alloys at the Liquid/Gas LiCl–KCl Salt Interface at 550 °C

Intermetallic compounds Cr3Te4/NiNbTe2 formation during infiltrating Te into Inconel 718