Abstract:A triply periodic minimal surface (TPMS) is an implicit surface with high interconnection and smoothness. However, only a few studies have focused on achieving a controlled negative Poisson’s ratio of TPMS. In this study, on the basis of the Schwarz primitive (P) surface, 3D auxetic structures are successfully implemented using a dual-period function. A series of shape-controllable, dual-period, deformation functions are obtained by summarizing the characteristics of periodic deformation functions (trigonometric and sawtooth) and applying Bezier curve fitting methods. Then, with the geometry originating from the P surface, two kinds of 3D auxetic structure design methods are proposed. The mechanical properties of the auxetic structure are analyzed and verified based on the control parameters. The following conclusions are derived. (1) Both 3D auxetic structures exhibit excellent 3D negative Poisson’s ratio properties. (2) The Poisson’s ratio can be effectively adjusted by the control parameters. (3) Adjustment of the Bezier fitting curve can optimize the 3D auxetic effect, resulting in a similar Poisson’s ratio in different directions. (4) The mapping relationship between mechanical properties and structural parameters is obtained by discretization sampling, and it can serve as a guide for functional applications. Moreover, based on the Gyroid (G) surface and P surface, a heterostructure with positive and negative Poisson’s ratio structures is obtained and applied to a stem in the hip joint. The simulation proves that the heterostructure can effectively reduce the tensile stress area between the bone and the implant, thereby effectively preventing the failure of the bone implant.

A novel mechanism for auxetic behavior in entangled materials with a spiral wire structure

A study of tubular braided structure with negative Poisson’s ratio behavior

A novel three-component helical auxetic yarn with staple fibers prepared by ring spinning

Mechanical modeling of an auxetic tubular braided structure: Experimental and numerical analyses

Mechanics of Auxetic Materials

Study on the Tensile Behavior of Helical Auxetic Yarns with Finite Element Method

Two-dimensional Materials with Intrinsic Auxeticity: Progress and Perspectives

Auxetic Materials with Large Negative Poisson'S Ratios Based on Highly Oriented Carbon Nanotube Structures

Controllable Three-Dimension Auxetic Structure Design Strategies Based on Triply Periodic Minimal Surfaces and Dual Period Deformation Function

Mechanical analysis of the auxetic behavior of novel braided tubular structures by the finite element method

Negative Poisson's Ratio in 1T-Type Crystalline Two-Dimensional Transition Metal Dichalcogenides

Finite element simulation of an auxetic plied yarn structure

Sign-tunable Poisson's Ratio in Semi-Fluorinated Graphene.

In-plane compression behavior of meta-tetrachiral and common auxetic structures

Exploiting nonlinearities through geometric engineering to enhance the auxetic behaviour in re-entrant honeycomb metamaterials

Finite element analysis study of parameters influencing the Poisson's ratio of auxetic woven fabrics

Strain-tunable topological antiferromagnetism of two-dimensional magnets with negative Poisson ratio

Effect of structural parameters on formability of auxetic weft-knitted fabrics based on zigzag structure

Auxeticity of monolayers induced by superimposed effect of hinged hexagons and tetragons with various bonding characteristics

Creating three-dimensional (3D) fiber networks with out-of-plane auxetic behavior over large deformations

Theory of strains in auxetic materials