Abstract:This study first investigates the preparation and characterization of titanium dioxide/reduced graphene oxide (TiO2/rGO) and then proposes the fabrication of photoanode in dye-sensitized solar cell (DSSC) from synthesized materials. Herein, the TiO2/rGO nanocomposites were prepared by the incorporation of hydrothermal approach and co-precipitation method from the precursors of titanium (IV) isopropoxide and graphene oxide. The fabrication of photoanode from the as-prepared TiO2/rGO nanocomposite paste was carried out using screen-printing technique. The performance of fabricated DSSCs was evaluated by current density-voltage curves and electrochemical impedance spectroscopy. The characterizations of TiO2 nanoparticles, TiO2/rGO nanocomposites, and their precursors were confirmed by ultraviolet-visible spectroscopy, Fourier-transform infrared spectroscopy, Raman spectroscopy, X-ray diffraction, and transmission electron microscopy. Experimental data showed that the optimal rGO weight percentage of 0.6% in the TiO2/rGO nanocomposite material fabricated DSSC successfully with the highest values of short-circuit current density (17.65 mA/cm2) and energy conversion efficiency (7.46%), approximately increasing 24% and 25%, respectively, in comparison with the pristine TiO2 material. Characterization results indicated that the incorporated hydrothermal co-precipitation method was efficient in producing well-defined spherical TiO2 nanoparticles decorated on the rGO sheets with an average diameter of 20–25 nm. Therefore, the TiO2/rGO nanocomposites with the eco-friendly and efficient synthesis method are highly promising for manufacturing and commercializing DSSCs widely.

A facile way to fabricate graphene sheets on TiO2 nanotube arrays for dye-sensitized solar cell applications

Growth of TiO2 Nanorod Arrays on Reduced Graphene Oxide with Enhanced Lithium-Ion Storage

Facile Synthesis of Nitrogen-Doped Reduced Graphene Oxide As an Efficient Counter Electrode for Dye-Sensitized Solar Cells

Construction of Efficient Photoanodes for Dye Sensitized Solar Cells: TiO2 Films with a Gradient Content of Graphene

Enhanced Performance of Dye-Sensitized Solar Cells with Layered Structure Graphitic Carbon Nitride and Reduced Graphene Oxide Modified TiO2 Photoanodes

Enhanced Performance of Dye Sensitized Solar Cells by Using a Reduced Graphene Oxide/tio 2 Blocking Layer in the Photoanode

Enhanced Performance of the Dye-Sensitized Solar Cells by the Introduction of Graphene Oxide into the TiO2 Photoanode

Low-Cost Fabrication of TiO2 Nanorod Photoelectrode for Dye-sensitized Solar Cell Application

Fluorine-free synthesis of reduced graphene oxide modified anatase TiO2 nanoflowers photoanode with highly exposed {0 0 1} facets for high performance dye-sensitized solar cell

Highly transparent graphene oxide composited TiO2 thin film as efficient photoanode for dye-sensitized solar cells

Reduction of graphene oxide at room temperature with vitamin C for RGO–TiO 2 photoanodes in dye-sensitized solar cell

Synthesis of titanium dioxide nanorods combining with titanium dioxide nanoparticles/reduced graphene oxide nanocomposite for fabrication of photoanodes in dye–sensitized solar cells

Synthesis of titanium dioxide/reduced graphene oxide nanocomposite by ultrasound-assisted mechanical mixing method for fabricating photoanode to upgrade the performance and stability of dye-sensitized solar cell

Surface modification of TiO 2 photoanode in dye-sensitized solar cells using reduced graphene oxide: A computational and experimental study

An investigation on surface modified TiO2 incorporated with graphene oxide for dye-sensitized solar cell

Synthesis of titanium dioxide/reduced graphene oxide nanocomposite material via the incorporated hydrothermal co-precipitation method for fabricating photoanode in dye-sensitized solar cell

Fabrication of Morphology Controllable Rutile TiO2 Nanowire Arrays by Solvothermal Route for Dye-Sensitized Solar Cells

Ordered TiO2 Nanotube Arrays on Transparent Conductive Oxide for Dye-Sensitized Solar Cells

Fabrication of Highly-Oriented TiO2 Nanotube Arrays and Its Application in Dye-Sensitized Solar Cells

Barium Titanate Perovskite Nanoparticles Integrated Reduced Graphene Oxide Nanocomposite Photoanode for High Performance for Dye-Sensitized Solar Cell

TiO2 nanorods: a facile size- and shape-tunable synthesis and effective improvement of charge collection kinetics for dye-sensitized solar cells.