Abstract:Synergistic effects of silane‐modified carbon black and nano‐silica hybrid fillers on the performance of EPDM rubber composites. This study assesses the effectiveness of a specially developed surface‐modified carbon black, both on its own and in combination with nano‐silica, as a hybrid filler for ethylene–propylene–diene monomer (EPDM) rubber compounds. The modification process, which included treatment with a silane coupling agent, resulted in enhanced curing characteristics. The ∆Torque values for compounds incorporating the modified carbon black exceeded those of other formulations by 25.85%. Scanning electron microscopy (SEM) analysis demonstrated improved filler dispersion and better compatibility between rubber and filler due to the surface modification. The silane‐modified carbon black showed considerable enhancements in mechanical properties, particularly in tear resistance, with increases in tensile and tear strength of 22.46% and 34.86%, respectively, following surface treatment. Dynamic mechanical analysis (DMA) indicated the influence of both surface modification and filler type, revealing that the combination of modified carbon black and nano‐silica achieved a reduction in rolling resistance of 20.41% and enhanced ice and wet grip performance by 7.95%. Additionally, modified carbon black displayed varying effects on the glass transition temperature. Thermal gravimetric analysis (TGA) confirmed that the thermal stability of the compounds was consistent, while solvent resistance improved with surface modification, as shown by swelling ratios. Thermodynamic analysis indicated that the surface modification of carbon black positively influences the elasticity and chain mobility of the rubber compounds studied. In conclusion, the careful selection and optimization of filler materials and their modifications are essential for customizing the properties of rubber compounds to satisfy specific performance criteria and applications. Highlights Promising EPDM compounds were prepared with Silane‐Modified CB and Nano‐Silica. Silane‐modified CB effectively improved the curing properties of the EPDM compound. The ΔTorque and cross‐link density of modified CB/EPDM show the highest value. Modified CB/Nano‐Silica/EPDM exhibited significant improvement in tear strength. Modified CB/Nano‐silica/EPDM have lower rolling resistance and higher wet grip.

Mechanical and rheological properties of calcium carbonate-filled ethylene propylene diene elastomer reinforced by metallic acrylate salt

Preparation and Characterization of Composites: Ethylene–propylene–diene Terpolymer‐graft‐maleic Anhydride/caco3

Preparation and Characterization of Composites: Epdm-G-Aa/Caco3

Mechanical Properties and Mullins Effect of Ethylene Propylene Diene Monomer Vulcanizes Reinforced with Silica Powders with Different Micropore Structures

A thermally reversible healing EPDM based elastomer with higher tensile properties and damping properties

Preparation and Mechanical Properties Analysis of Rare Earth Filling Ethylene‐Allene Monomer Rubber Composite

Vulcanization kinetics and mechanical properties of filled ethylene-vinyl acetate copolymer rubber composites

Hybrid In Situ Reinforcement of EPDM Rubber Compounds Based on Phenolic Novolac Resin and Ionic Coagent

Photoinitiated Crosslinking of EPDM/inorganic Filler Blends and Characterization of Related Properties

Ionic Liquids and Calcium Oxide Grafted with Allylmalonic Acid Applied to Support the Peroxide Crosslinking of an Ethylene–Propylene Copolymer

The effect of cross-linking system and reinforcement on the cross-linking reaction of peroxide vulcanized ethylene-propylene-diene terpolymer (EPDM) matrix

The effect of silane‐modified carbon black and nano‐silica, individually and in combination, on the performance of ethylene–propylene–diene monomer rubber

Study on the Effect of Halloysite Nanotubes on the Mechanical Properties and Swelling Resistance of Ethylene-Propylene Diene Monomer (EPDM)/Nitrile Butadiene Rubber (NBR) Blend Nanocomposites

Investigations on the Morphological, Mechanical, Ablative, Physical, Thermal, and Electrical Properties of EPDM-Based Composites for the Exploration of Enhanced Thermal Insulation Potential

Preparation of nanoalumina/EPDM composites with good performance in thermal conductivity and mechanical properties

Modification of EPDM by CaCO_3 and ZDMA

Influence of Incorporating CaCO3 into Room Temperature Vulcanized Silicone Sealant on Its Mechanical and Dynamic Rheological Properties

Enhancement of EPDM Crosslinked Elastic Properties by Association of Both Covalent and Ionic Networks

Cellulose and lignin in place of EPDM and carbon black for automotive sealing profiles

Design, Preparation and Characterization of a High-Performance Epoxy Adhesive with Poly (Butylacrylate-block-styrene) Block Copolymer and Zirconia Nano Particles in Aluminum- Aluminum Bonded Joints

Acrylic Rubber-Reinforced Halloysite Nanotubes/Carbon Black Hybrid Fillers for Oil Seal Applications: Thermal Stability and Dynamic Mechanical Properties