Abstract:Based on the response of a bridge to various excitations, Structural Health Monitoring (SHM) systems can provide comprehensive, real-time insight into their condition. While collected data usually represents the response to a combination of known and unknown loads, modified data, cleaned of the effects of dynamic loadings, can be made to represent the response of the structure to only constant dead loads and slowly changing and easily measured cyclic thermal loads. While it is often common to separate the effect of these two loads, the proposed method suggests that it is advantageous to consider the combined effect. Furthermore, once a limited amount of response data due to these loads has been collected, their combined effect can be easily predicted.A simplified model, consisting of the key structural components of a cable-stayed bridge, a beam, an inclined cable, and a bearing, and a more complex, that of a Finite Element cable-stayed bridge model, were used to evaluate the ability of the proposed method for identifying changes in these three elements. Beam damage was simulated as a flexural stiffness reduction for part of the beam, cable damage as an axial stiffness reduction of the cable and the bearing damage as a stiffness increase of a horizontal spring supporting the free to roll end of the beam. Using the model, it was shown that the behavior of two parameters, the slope and the intercept taken from the beam strain-temperature curve, can be used to not only identify change/damage to these members, but more importantly, determine the nature of the change/damage. Combined with the fact that the method has limited requirements for collecting, storing, and processing data, the proposed methodology represents a very promising Damage Identification tool.

Fast damage detection of cable-stayed bridges using an improved edge-detection method

The Application of a Damage Detection Method Using Artificial Neural Network and Train-Induced Vibrations on a Simplified Railway Bridge Model

Ultrasonic Guided Wave Approach Incorporating SAFE for Detecting Wire Breakage in Bridge Cable

DAMAGE LOCATING OF CABLE-STAYED BRIDGES BASED ON DYNAMIC MEASUREMENT AND NEURAL NETWORK TECHNIQUE

Vibration-Based Damage Detection Of Cable-Stayed Bridges

Structural Damage Detection of Cable-Stayed Bridges Using Changes in Cable Forces and Model Updating

A Novel Mode Sharp-Based Damage Detection Method of Large-Span Bridges

Damage identification of main girders for long span cable-stayed bridge based on flexibility matrix

Damage detection of a cable-stayed bridge using feature extraction and selection methods

Damage detection method for structures based on the relative variation of wavelet total energy

THREE-STEP METHOD FOR DAMAGE DETECTION OF LONG SPAN CABLE-STAYED BRIDGES

Damage detection of long-span bridge structures based on response surface model

Detecting deck damage in concrete box girder bridges using mode shapes constructed from a moving vehicle

Structural Damage Detection for the Main Girder of Cable-stayed Bridges Based on Mahalanobis Distance Cumulants

The tap-scan method for damage detection of bridge structures

Damage detection of bridge structures under moving loads based on CEEMD and PSD sensitivity analysis

Damage identification of a large-span concrete cable-stayed bridge based on genetic algorithm

Detect the Stiffness Transition in Beam Structures by Using the Passive Tap-Scan Method

An Improved Static Residual Force Algorithm and Its Application in Cable Damage Identification for Cable-Stayed Bridges

Damage identification in cable-stayed bridges based on the redistribution of dead and thermal loads

On the Tapping-Scan Method Designed for the Damage Detection of Bridge Structures