Abstract:This paper presents vibration-based damage detection (VBDD) for testing a steel-concrete composite bridge deck in a laboratory using both model-based and non-model-based methods. Damage that appears on a composite bridge deck may occur either in the service condition or in the loading condition. To verify the efficiency of the dynamic test methods for assessing different damage scenarios, two defect cases were designed in the service condition by removing the connection bolts along half of a steel girder and replacing the boundary conditions, while three damage cases were introduced in the loading condition by increasing the applied load. A static test and a multiple reference impact test (MRIT) were conducted in each case to obtain the corresponding deflection and modal data. For the non-model-based method, modal flexibility and modal flexibility displacement (MFD) were used to detect the location and extent of the damage. The test results showed that the appearance and location of the damage in defect cases and loading conditions can be successfully identified by the MFD values. A finite element (FE) model was rationally selected to represent the dynamic characteristics of the physical model, while four highly sensitive physical parameters were rationally selected using sensitivity analysis. The model updating technique was used to assess the condition of the whole deck in the service condition, including the boundary conditions, connectors, and slab. Using damage functions, Strand7 software was used to conduct FE analysis coupled with the MATLAB application programming interface to update multiple physical parameters. Of the three different FE models used to simulate the behavior of the composite slab, the calculated MFD of the shell-solid FE model was almost identical to the test results, indicating that the performance of the tested composite structure could be accurately predicted by this type of FE model.

Detecting deck damage in concrete box girder bridges using mode shapes constructed from a moving vehicle

The Application of a Damage Detection Method Using Artificial Neural Network and Train-Induced Vibrations on a Simplified Railway Bridge Model

Vibration-Based Damage Detection Of Cable-Stayed Bridges

Damage Identification of Multi-Box Steel-Concrete Composite Bridges Based on Modal Curvature Difference Method

A Novel Mode Sharp-Based Damage Detection Method of Large-Span Bridges

Vibration-Based Damage Detection of a Steel-Concrete Composite Slab Using Non-Model-Based and Model-Based Methods

Damage Identification Of The Multi-Box Girder Bridge By Modal Curvature Method

Mode Shape Identification and Damage Detection of Bridge by Movable Sensory System

Damage detection of bridge structures under moving loads based on CEEMD and PSD sensitivity analysis

Multidamage Detection of Breathing Cracks in Plate‐Like Bridges: Experimental and Numerical Study

Kalman Filter Based Estimation of Neutral Axis Position of Bridge Deck under Traffic Loading

Damage detection of high-speed railway box girder using train-induced dynamic responses

Damage Detection of Continuous Beam Bridge Based on Maximum Successful Approximation Approach of Wavelet Coefficients of Vehicle Response

An On-Board Damage Detection Method for Heavy-Haul Railway Bridge Based on Sensitivity Analysis of Bogie Responses

Health monitoring of steel box girder bridges using non-contact sensors

Review of Vibration-Based Damage Detection and Condition Assessment of Bridge Structures Using Structural Health Monitoring

Damage Detection in Bridge Structure Using Vibration Data under Random Travelling Vehicle Loads

Research on Methods of Damage Diagnosis Based on Bridges with Dynamic Characteristics

Dynamic Property Analysis of Orthotropic Bridge Deck with Local Fatigue Crack

Detect the Stiffness Transition in Beam Structures by Using the Passive Tap-Scan Method