Abstract:Currently, there is an expanded utilisation of lightweight construction structures in buildings, which results in a low structure's thermal storage capacity of the envelope due to the application of thermally unsuitable materials. PCMs incorporated into building structures components are potential alternatives to manage the inadequate thermal energy storage capacity of lightweight structures. To provide a guide for selecting and applying commercial PCMs in construction, nine organic and inorganic bulk materials were selected, and their thermophysical properties were characterised. Thus, the enthalpy of melting/crystallisation, the melting/crystallisation temperature, the stability of 50 cycles, and the verification of the presence of the subcooling phenomenon by DSC and the T-history method were evaluated. Since the adequate methods to incorporate the PCMs in gypsum are suspension and vacuum impregnation, their thermal properties, together with density and viscosity, need to be considered, properties that are not typically reported in the datasheets of commercial PCMs. Furthermore, the temperature dependence of the viscosity and density of the solid/liquid PCMs were measured by a rheometer and densimeter/pycnometer, respectively. Based on liquid and solid density values, the volumetric expansion of PCMs during the melting process was calculated. Finally, the characterisation parameters were compared with those provided by the suppliers of the different companies. The characterisation's results indicate that for both organic and inorganic PCMs, the fusion temperature (21°C-26°C) and the density values (0.777-1.515 g/cm3 for liquid state and 0.895-1.860 g/cm3 for solid state) were consistent with the values provided in the datasheet from the suppliers'. Viscosity values were found to be higher than expected, and the enthalpy was found to be lower (19%-30%) when compared with the technical datasheets from manufacturers'. The cycling stability study results were consistent only for the organic samples, without displaying phase segregation or subcooling problems. Based on the thermophysical characterisation, it was possible to establish that three organic RT-21, RT-21(TA), RT-25, and three inorganic SP-21E, PCM 21C, HS-24P PCMs would be suitable products for their inclusion into gypsum boards under the conditions analysed. These findings provide new insights regarding the applicability and development of new strategies and materials for passive or active heating/cooling applications in buildings.

Rheological Behaviour of Cementitious Materials Incorporating Solid–Solid Phase Change Materials

The thermal performances of cement-based materials with different types of microencapsulated phase change materials

Multiphysics study on cement-based composites incorporating green biobased shape-stabilized phase change materials for thermal energy storage

Thermal performance of a building envelope including microencapsulated phase change materials (PCMs): A multiscale experimental and numerical investigation

Cement-based materials incorporated with polyethylene glycol/sepiolite composite phase change materials: hydration, mechanical, and thermal properties

Enhanced thermo-mechanical properties of cementitious composites via red mud-based microencapsulated phase change material: Towards energy conservation in building

Rheo-viscoelastic Behavior and Viscosity Prediction of Calcium Sulphoaluminate Modified Portland Cement Pastes

Characterisation of commercial phase change materials with potential application in gypsum boards for buildings

Analysis of Freeze-Thaw Damage of Cement Mortars Doped with Polyethylene Glycol-Based Form Stable Phase Change Materials

Phase Change Materials for Energy Efficiency in Buildings and Their Use in Mortars

Physical Properties of Eco-Sustainable Form-Stable Phase Change Materials Included in Mortars Suitable for Buildings Located in Different Continental Regions

Rheology and Yield Stress Evolution of Highly Flowable Cementitious Grouting Materials: Mechanisms and Modeling

Use of sustainable Phase Change Material (PCM) in mortars for building energy efficiency

Applications of Sustainable Polymer-Based Phase Change Materials in Mortars Composed by Different Binders

Thermo-physical Characterisation of Plasters Containing Phase Change Materials (PCMs)

Processing of calcium sulfoaluminate eco-cement coatings containing microencapsulated phase change materials

Rheological Properties and Early-Age Microstructure of Cement Pastes with Limestone Powder, Redispersible Polymer Powder and Cellulose Ether

Temperature dependent effect of nano-scale phase change materials on fresh and hardened cement based mortar

Rheology of low‐clinker suspensions: Multiscale comparison of the effect of PCE on thixotropy

Modelling the Relations of Rheological Characteristics with Composition of Plaster Mortar

Investigating temperature change rate and pore confinement effect on thermal properties of phase change materials for de-icing and low-temperature applications in cementitious composites