Abstract:Investigations into Phase Change Materials (PCMs) for heat storage in facilities have gained significance, contributing to indoor temperature regulation, decreased energy usage, and improved building efficiency, thereby supporting sustainability initiatives. However, the issue of PCM leakage during the heating phase has constrained its thermal energy storage (TES) prospective at large scaled-practices. Addressing this concern, the present study emphases on elimination of the leakage problem of dodecyl alcohol (DA) as a PCM with appropriate melting temperature for building TES request by its impregnating into the natural zeolite (NZ) as a low cost host matrix. In the second stage of the work, using the developed shape stable-NZ/DA (SS-NZ/DA) composite PCM in cement mortar instead of sand, novel cementitious mortars with enhanced thermal properties were created by incorporating different weight percentages (25 %, 50 %, 75 %, and 100 %) compared to the mortar comprising NZ. Experimental works were carried out to analyze the shape-stability, TES features, cycling TES stability and thermal endurance of the SS-NZ/DA composite as well the physical properties, mechanical strength, and solar temperature regulation performance of the SS-NZ/DA included mortars. The SS-NZ/DA demonstrated the melting enthalpy of 107.5 J/g at 19.47 °C and a freezing enthalpy of 106.1 J/g at 19.86 °C. The performance test results obtained under real weather conditions indicated that the integration of SS-NZ/DA into mortar presented maximum drop of 10 % and 9.26 % in peak indoor temperature at the SS-CPCM slab surface and the center of SS-CPCM slab-cabin, respectively, accompanied by an approximate 3-hour time delay. Mortars with SS-NZ/DA composite PCM exhibited a decreased dry unit weight (1189 kg/m 3 ) and thermal conductivity (0.394 W/mK) while experiencing a moderate strength loss (4.5 MPa). These favorable physico-mechanical properties, TES characteristics and thermal management capability make the novel cementitious mortar containing composite PCM as an energy-efficient material for creating thermo-regulative building components. In this study, the natural, economical, and environmentally friendly nature of the NZ material used for PCM impregnation, its ability to contain a high percentage of PCM (up to 45 %) without any leakage issues, is the most fundamental and important characteristic of the composite used. The most unique feature of this composite mortar is the ability to achieve sufficient mechanical and thermal properties in cementitious mortars produced using this composite material without any leakage problems.

Temperature dependent effect of nano-scale phase change materials on fresh and hardened cement based mortar

Pr epar ati on of mi crocapsuI e phase change mat eri aI mort ar

Preparation and Characterization of Fatty Acid Ternary Eutectic Mixture/Nano-Sio 2 Composite Phase Change Material for Building Applications

Thermal Conductivity of Aerated Concrete (AC) Composites Containing Micro-Encapsulated Phase Change Materials

Effects of Temperature and Moisture on Concrete-PCM Interface Performance

Investigation on Concrete-Pcm Interface under Elevated Temperature: at Material Level and Member Level

Characterization of Novel Shape‐stabilized Phase Change Material Mortar: Portland Cement Containing Na 2 SO 4 ·10H 2 O and Fly Ash for Energy‐efficient Building

A novel cement mortar comprising natural zeolite/dodecyl alcohol shape stable composite phase change material for energy effective buildings

Use of sustainable Phase Change Material (PCM) in mortars for building energy efficiency

Experimental investigation of thermal and mechanical characteristics of slag cement mortars with PCM for radiant floors

The thermal performances of cement-based materials with different types of microencapsulated phase change materials

Enhanced thermo-mechanical properties of cementitious composites via red mud-based microencapsulated phase change material: Towards energy conservation in building

Phase Change Materials for Energy Efficiency in Buildings and Their Use in Mortars

Utilization of Form-Stable Paraffin/Nano-Silica Phase Change Materials for Thermal Energy Storage Enhancement in Mortar

Thermophysical and Mechanical Properties of Hardened Cement Paste with Microencapsulated Phase Change Materials for Energy Storage

Investigating temperature change rate and pore confinement effect on thermal properties of phase change materials for de-icing and low-temperature applications in cementitious composites

A Review of Recent Improvements, Developments, Effects, and Challenges on Using Phase-Change Materials in Concrete for Thermal Energy Storage and Release

Applications of Sustainable Polymer-Based Phase Change Materials in Mortars Composed by Different Binders

Experimental and analytical investigations on the behavior of interface between concrete and polymer cement mortar under hygrothermal conditions

Analysis of Freeze-Thaw Damage of Cement Mortars Doped with Polyethylene Glycol-Based Form Stable Phase Change Materials

Study on Shear Behavior of Concrete-polymer Cement Mortar at Elevated Temperature