Abstract:The nanofluids characterization is of fundamental importance to predict their applicability in a real heat transfer situation. In addition to the transport properties, the nanofluid stability is an important factor to be studied, due to the long pumping, heating, cooling and resting cycles the fluids are usually subjected to. Carbon nanotubes have great potential to be used in nanofluids, due to their high thermal conductivity and low density. However, for aqueous medium, stability requires the use of stabilization methods. This work carried out the study of the transport properties and stability of nanofluids with multiwalled carbon nanotubes (MWCNT), using three stabilization methods: Triton X-100 (TrX–MWCNT) and Arabic gum (AG–MWCNT) as surfactants and functionalized carbon nanotubes with COOH group (COOH–MWCNT). These three nanofluids were compared to investigate the best configuration for heat transfer processes. The thermal conductivity was studied using the hot wire method; rheology was studied through three curves in rotational rheometer of concentric cylinders; specific heat was studied by the differential scanning calorimetry method; density was measured by the Coriolis Effect method; nanoparticles size and zeta potential were measured by the dynamic light scattering method. The COOH–MWCNT nanofluids present the highest thermal conductivity increase reaching 15% at 60 °C and 12% at 30 °C with 1wt% while the A.G–MWCNT and TrX–MWCNT reach 11% and 7.5%, respectively, at 30 °C. A.G–MWCNT nanofluids showed greater stability after long sonication times, while COOH–MWCNT presents best dispersion at 0.125 and 0.25 wt%, from 40 to 160 min of sonication. The specific heat increases with temperature and decreases with MWCNT concentration; however, it presents a peculiar increase in the concentration of 0.25 wt%, increasing about 0.5% and 4.5% for A.G–MWCNT and COOH–MWCNT, respectively at 60 °C. COOH–MWCNT nanofluids showed a thixotropic behavior for 0.5 and 1.0 wt% and large viscosity increase reaching 3.75 and 5.5 times the base fluid viscosity at 5 °C and 60 °C, respectively, with 1 wt%. The nanofluids A.G–MWCNT and COOH–MWCNT present good stability, as well as an increase in transport properties, optimized at a concentration close to 0.25 wt% and the COOH–MWCNT nanofluids can be stabilized simply by changing the water pH.

Evaluation of Physicothermal Properties of Silicone Oil Dispersed with Multiwalled Carbon Nanotubes and Data Prediction Using ANN

Thermo-physical properties of water-based single-walled carbon nanotube nanofluid as advanced coolant

Thermal conductivity prediction of WO 3 -CuO-Ag (35:40:25)/water hybrid ternary nanofluid with Artificial Neural Network and back-propagation algorithm

Synthesis of new dihybrid nanofluid of TiO2/MWCNT in water–ethylene glycol to improve mixture thermal performance: preparation, characterization, and a novel correlation via ANN based on orthogonal distance regression algorithm

Using of artificial neural networks and different evolutionary algorithms to predict the viscosity and thermal conductivity of silica-alumina-MWCN/water nanofluid

Experimental, Price-Performance and Artificial Neural Network (ANN) Analysis of MWCNT-CuO/ Water-EG (50-50) Nanofluid as a Coolant/Antifreeze Working Fluid

Measurement of the thermal conductivity of MWCNT-CuO/water hybrid nanofluid using artificial neural networks (ANNs)

Performance characterization of a solar-powered shell and tube heat exchanger utilizing MWCNTs/water-based nanofluids: An experimental, numerical, and artificial intelligence approach

Experimental studies and ANN predictions on the thermal properties of TiO2-Ag hybrid nanofluids: Consideration of temperature, particle loading, ultrasonication and storage time

Heat transfer innovation of engine oil conveying SWCNTs-MWCNTs-TiO2 nanoparticles embedded in a porous stretching cylinder

Investigating the viscosity of hybrid nano-lubricant containing MWCNTs with ANN modeling to introduce the best and most optimal lubricant

MWCNT and COOH–MWCNT aqueous nanofluids: thermophysical and rheological characterization

Rheological Characteristics, Pressure Drop, and Skin Friction Coefficient of MWCNT–Oil Nanofluid Flow Inside an Inclined Microfin Tube

Artificial neural network modeling of thermal characteristics of WO 3 -CuO (50:50)/water hybrid nanofluid with a back-propagation algorithm

Numerical Evaluation and Artificial Neural Network (ANN) Model of the Photovoltaic Thermal (PVT) System with Different Nanofluids

Investigating the thermal properties of single-grade engine oil (SAE 50) with the simultaneous addition of MWCNT and CuO nanoparticles

Performance analysis and machine learning algorithms of parabolic trough solar collectors using Al 2 O 3 -MWCNT as a hybrid nanofluid

Dynamic Viscosity Prediction for MWCNT-MgO (10%-90%) -SAE40 Oil Hybrid Nano-lubricant Using Artificial Neural Network and Multi-Dimensional Nonlinear Least Square Curve Fitting

Experimental investigation of nanofluids for heat pipes used in solar photovoltaic panels

Specific Heat Capacity Extraction of Soybean Oil/MXene Nanofluids Using Optimized Long Short-Term Memory

Entropy analysis on EMHD 3D micropolar tri-hybrid nanofluid flow of solar radiative slendering sheet by a machine learning algorithm